Dodge Ram Truck 1500-2500-3500. Manual — part 366

SEATBELT INDICATOR OUTPUT CIRCUIT OPEN SHORT TO GROUND

For a complete wiring diagram Refer to Section 8W.

Possible Causes

INSTRUMENT CLUSTER

1.

INSTRUMENT CLUSTER

NOTE: Diagnose and repair any PCM (ECM if diesel equipped), or Communication DTCs before proceeding
with this test.

The Instrument Cluster indicator LEDs are not replaceable, view repair.

Repair

Replace and configure the Instrument Cluster in accordance with the Service Information.

Perform BODY VERIFICATION TEST - VER 1. (Refer to BODY VERIFICATION TEST - VER 1.)

8J - 24

INSTRUMENT CLUSTER - ELECTRICAL DIAGNOSTICS

DR/DH

TRANS TEMP INDICATOR OUTPUT CIRCUIT OPEN OR SHORT TO GROUND

For a complete wiring diagram Refer to Section 8W.

Possible Causes

INSTRUMENT CLUSTER

1.

INSTRUMENT CLUSTER

NOTE: Diagnose and repair any PCM (ECM if diesel equipped), or Communication DTCs before proceeding
with this test.

The Instrument Cluster indicator LEDs are not replaceable, view repair.

Repair

Replace and configure the Instrument Cluster in accordance with the Service Information.

Perform BODY VERIFICATION TEST - VER 1. (Refer to BODY VERIFICATION TEST - VER 1.)

DR/DH

INSTRUMENT CLUSTER - ELECTRICAL DIAGNOSTICS

8J - 25

TRANS TEMP INDICATOR OUTPUT CIRCUIT OVERLOAD OR SHORT TO BATT

For a complete wiring diagram Refer to Section 8W.

Possible Causes

INSTRUMENT CLUSTER

1.

INSTRUMENT CLUSTER

NOTE: Diagnose and repair any PCM (ECM if diesel equipped), or Communication DTCs before proceeding
with this test.

The Instrument Cluster indicator LEDs are not replaceable, view repair.

Repair

Replace and configure the Instrument Cluster in accordance with the Service Information.

Perform BODY VERIFICATION TEST - VER 1. (Refer to BODY VERIFICATION TEST - VER 1.)

8J - 26

INSTRUMENT CLUSTER - ELECTRICAL DIAGNOSTICS

DR/DH

WAIT TO START INDICATOR OUTPUT CIRCUIT OPEN OR SHORT TO GROUND

For a complete wiring diagram Refer to Section 8W.

Possible Causes

INSTRUMENT CLUSTER

1.

INSTRUMENT CLUSTER

NOTE: Diagnose and repair any PCM (ECM if diesel equipped), or Communication DTCs before proceeding
with this test.

The Instrument Cluster indicator LEDs are not replaceable, view repair.

Repair

Replace and configure the Instrument Cluster in accordance with the Service Information.

Perform BODY VERIFICATION TEST - VER 1. (Refer to BODY VERIFICATION TEST - VER 1.)

DR/DH

INSTRUMENT CLUSTER - ELECTRICAL DIAGNOSTICS

8J - 27