Lincoln Nautilus (2022 year). Manual in english — page 8
INTERIOR MIRROR PRECAUTIONS
WARNING: Do not adjust the mirrors
when your vehicle is moving. This could
result in the loss of control of your vehicle,
serious personal injury or death.
Note: Do not clean the mirror housing or
glass with harsh abrasives, fuel or other
petroleum-based cleaning products.
AUTO-DIMMING INTERIOR MIRROR
WHAT IS THE AUTO-DIMMING
INTERIOR MIRROR
The mirror dims to reduce the effect of bright
light from behind. It returns to normal when
the bright light from behind is no longer
present or if you shift into reverse (R).
AUTO-DIMMING INTERIOR MIRROR
LIMITATIONS
Do not block the sensors on the front and
back of the mirror.
Note: A rear center passenger or raised rear
center head restraint could prevent light from
reaching the sensor.
134
Interior Mirror
-------------------------------------------------------------------------------------------------------------------------------------------------------------
ADJUSTING THE EXTERIOR
MIRRORS
WARNING: Do not adjust the mirrors
when your vehicle is moving. This could
result in the loss of control of your vehicle,
serious personal injury or death.
E144073
Left-hand mirror.
A
Adjustment control.
B
Right-hand mirror.
C
To adjust your mirrors, switch your vehicle
on, with the ignition in accessory mode or
the engine running and then:
1. Select the mirror you want to adjust. The
control light turns on.
2. Use the adjustment control to adjust the
position of the mirror.
3. Press the mirror control again. The
control light turns off.
FOLDING THE EXTERIOR MIRRORS
- VEHICLES WITH: MANUAL
FOLDING MIRRORS
Push the mirror toward the door window
glass.
Make sure that you fully engage the mirror
in its support when returning it to its original
position.
FOLDING THE EXTERIOR MIRRORS
- VEHICLES WITH: POWER
FOLDING MIRRORS
With the auto-fold feature enabled, the
exterior mirrors fold in toward the glass after
you place the transmission into park (P), turn
off the vehicle, open and close the driver
side door and lock the vehicle. The exterior
mirrors unfold and return to their driving
position after you unlock the vehicle and
open and close the driver side door.
For tight parking conditions, press
the control to fold the mirrors.
Press the control again to unfold
the mirrors.
If you press the control to fold in the mirrors
with auto-fold on, the mirrors do not unfold
when you unlock your vehicle.
Note: The power folding mirrors operate with
the ignition on, and for several minutes after
you switch the ignition off.
135
Exterior Mirrors
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Note: If you fold and unfold the mirrors
several times within one minute, the power
fold function may turn off to protect the
motors from overheating.
Switching Auto-fold On and Off
1. Press Settings on the touchscreen.
2. Press Vehicle Settings.
3. Press Mirrors.
4. Switch Autofold on or off.
Loose Mirror
If you manually fold the power-folding
mirrors, they may not work properly even
after you re-position them. You need to reset
them if:
•
The mirrors vibrate when you drive.
•
The mirrors feel loose.
•
The mirrors do not stay in the folded or
unfolded position.
•
One of the mirrors is not in its normal
driving position.
To reset the power-fold feature, use the
power-folding mirror control to fold and
unfold the mirrors. You may hear a loud noise
as you reset the power-folding mirrors. This
sound is normal. Repeat this process as
needed each time you manually fold the
mirrors.
AUTO-DIMMING EXTERIOR MIRROR
WHAT IS THE AUTO-DIMMING
EXTERIOR MIRROR
The driver exterior mirror dims when the
interior auto-dimming mirror turns on.
Memory Mirrors
(If Equipped)
You can save and recall the mirror positions
through the memory function. See Memory
Function (page 174).
Heated Exterior Mirrors
See Switching the Heated Mirrors On and
Off (page 157).
Signal Indicator Mirrors
(If Equipped)
The outer portion of the appropriate mirror
housing blinks when you switch on the turn
signal.
Lincoln Welcome Mat
Projection lights, on the bottom of the mirror
housings, project an image onto the ground
a short distance from the vehicle.
Blind Spot Monitor
See What Is Blind Spot Information System
(page 277).
136
Exterior Mirrors
-------------------------------------------------------------------------------------------------------------------------------------------------------------
OPENING AND CLOSING THE SUN
SHADE
WARNING: Do not leave children
unattended in your vehicle and do not let
them play with the sun shades. Failure to
follow this instruction could result in
personal injury.
The controls are on the overhead console.
Opening the Sun Shade
E312249
Press and release the switch to
activate the one-touch open
feature. To stop movement, press
the switch a second time. The sun shade also
opens when you open the moonroof.
Note: The sun shade stops short of its fully
opened position for the comfort of rear
passengers. To fully open the sun shade,
press the switch again.
Closing the Sun Shade
E312250
Press and release the switch to
activate the one-touch close
feature. To stop movement, press
the switch a second time.
Note: If fully open, the sunshade stops after
covering the rear glass panel. Press and
release again to fully close the sunshade.
OPENING AND CLOSING THE
MOONROOF
WARNING: Do not leave children
unattended in your vehicle and do not let
them play with the moonroof. Failure to
follow this instruction could result in
personal injury.
WARNING: When closing the
moonroof, verify that it is free of
obstruction and make sure that children
and pets are not in the proximity of the roof
opening.
Note: With the panoramic moonroof panel
fully open and vehicle speed increasing to
approximately 50 mph (80 km/h), the
moonroof opening panel automatically
closes approximately 8 in (20 cm) to reduce
excessive wind noise at higher speeds. This
feature only functions one time per key cycle,
so you can open the glass further if desired.
The moonroof controls are located on the
overhead console and have a one-touch
open and close feature. To stop its
movement during one-touch operation, press
the control a second time.
Opening the Moonroof
E340663
Press and release the switch to
activate the one-touch open
feature. To stop movement, press
the switch a second time.
Closing the Moonroof
E340636
Press and release the switch to
activate the one-touch close
feature, from either the open or
vent positions. To stop movement, press the
switch a second time.
137
Moonroof
(If Equipped)
-------------------------------------------------------------------------------------------------------------------------------------------------------------
VENTING THE MOONROOF
WARNING: Do not leave children
unattended in your vehicle and do not let
them play with the moonroof. Failure to
follow this instruction could result in
personal injury.
The moonroof controls are on the overhead
console.
E340635
With the moonroof in the closed
position, press and release the
switch to vent the moonroof. To
close the moonroof from the vent position,
press and release the switch again.
MOONROOF BOUNCE-BACK
WHAT IS MOONROOF BOUNCE-BACK
The moonroof stops and reverses some
distance if it detects an obstacle when
closing.
OVERRIDING MOONROOF BOUNCE-
BACK
Press and hold the close button within two
seconds after the moonroof comes to a stop.
138
Moonroof
(If Equipped)
-------------------------------------------------------------------------------------------------------------------------------------------------------------
INSTRUMENT CLUSTER OVERVIEW
E271984
139
Instrument Cluster
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Status bar.
A
Speedometer.
B
Right information group.
C
Fuel gauge.
D
Engine coolant temperature gauge.
E
Left information group.
F
TACHOMETER
Indicates the engine speed.
SPEEDOMETER
Indicates the vehicle speed.
FUEL GAUGE
WHAT IS THE FUEL GAUGE
Indicates approximately how much fuel is in
the fuel tank.
FUEL GAUGE LIMITATIONS
The fuel gauge may not provide an accurate
reading when your vehicle is on an incline.
LOCATING THE FUEL FILLER DOOR
The arrow adjacent to the fuel pump symbol
indicates on which side of your vehicle the
fuel filler door is located.
WHAT IS THE LOW FUEL REMINDER
A low fuel level reminder displays and
sounds when the distance to empty reaches
75 mi (120 km) to empty for MyKey, and at
50 mi (80 km), 25 mi (40 km), 12 mi (20 km)
and 0 mi (0 km) for all vehicle keys.
Note: The low fuel reminder can appear at
different fuel gauge positions depending on
fuel economy conditions. This variation is
normal.
140
Instrument Cluster
-------------------------------------------------------------------------------------------------------------------------------------------------------------
WHAT IS DISTANCE TO EMPTY
Indicates the approximate distance your
vehicle can travel on the fuel remaining in
the tank. Changes in driving pattern can
cause the value to not only decrease but also
increase or stay constant for periods of time.
ENGINE COOLANT TEMPERATURE
GAUGE
Indicates the engine coolant temperature.
ENGINE OIL PRESSURE GAUGE
Indicates the engine oil pressure.
Note: This is a configurable gauge.
TRANSMISSION FLUID
TEMPERATURE GAUGE
Indicates the transmission fluid temperature.
Special operating conditions can cause
higher than normal operating temperatures.
See Special Operating Conditions
Scheduled Maintenance (page 471).
Note: This is a configurable gauge.
12V BATTERY GAUGE
Indicates the power of the 12-volt battery.
WHAT ARE THE INSTRUMENT
CLUSTER WARNING LAMPS
Warning lamps alert you to a vehicle
condition that could become serious. Some
lamps illuminate when you start your vehicle
to make sure they work. If any lamps remain
on after starting your vehicle, refer to the
respective system warning lamp for further
information.
INSTRUMENT CLUSTER WARNING
LAMPS
Anti-Lock Brake System
If it illuminates when you are
driving, this indicates that the
system requires service. Your
vehicle continues to have normal braking
without the anti-lock brake system function.
Have your vehicle checked as soon as
possible.
Battery
It illuminates when you switch the
ignition on.
If it illuminates when the engine is
running, this indicates your vehicle requires
service. Have your vehicle checked as soon
as possible.
141
Instrument Cluster
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Brake System
E270480
It illuminates when you apply the
parking brake and the ignition is
on. If it illuminates when your
vehicle is moving, make sure the
parking brake is released. If the
parking brake is released, this
indicates low brake fluid level or the brake
system requires service. Have your vehicle
checked as soon as possible.
Note: Indicators may vary depending on
region.
Door Ajar
It illuminates when you switch the
ignition on and remains on if any
door is open.
Electric Parking Brake
E146190
It illuminates or flashes when the
electric parking brake requires
service.
Engine Coolant Temperature
If it illuminates, safely stop your
vehicle and switch your vehicle off.
Fasten Seatbelt
E71880
It illuminates and a tone sounds
until you fasten the seatbelts.
Hood Ajar
E246598
It illuminates when the ignition is
on and the hood is not completely
closed.
Liftgate Ajar
E162453
It illuminates when the ignition is
on and the liftgate is not
completely closed.
Low Beam Warning
E181350
It illuminates when the low beam
headlamp requires service. Have
the system checked as soon as
possible.
Low Fuel Level
It illuminates when the fuel level is
low.
Low Tire Pressure
It illuminates when your tire
pressure is low. If illuminated,
check your tire pressure as soon
as possible. If it begins to flash at anytime,
have the system checked as soon as
possible.
Low Washer Fluid Level
E132353
It illuminates when the washer fluid
is low.
142
Instrument Cluster
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Malfunction Indicator Lamp
It illuminates when the ignition is
on and the engine is off, this is
normal operation. If it illuminates
when the engine is on this indicates that the
emission control system requires service. If
it flashes, have your vehicle checked
immediately. See Starting and Stopping the
Engine – Warning Lamps (page 195). See
Emission Law (page 554).
Oil Pressure
It illuminates when the engine oil
pressure is low.
Powertrain Fault
It illuminates when the powertrain
requires service. Have your
vehicle checked as soon as
possible.
WHAT ARE THE INSTRUMENT
CLUSTER INDICATORS
Indicators notify you of various features that
are active on your vehicle.
INSTRUMENT CLUSTER
INDICATORS
Adaptive Cruise Control
E144524
See Adaptive Cruise Control
(page 256).
Adaptive Steering
E223375
See Electric Power Steering (page
234).
Airbag
E67017
Auto Hold
E197933
E197934
Automatic High Beam
See Automatic High Beam
Control (page 124).
Auto Start-Stop
See Auto-Start-Stop (page 198).
Blind Spot Information System
E151262
See Blind Spot Information
System (page 277).
Cruise Control
(If Equipped)
E71340
See Cruise Control (page 254).
143
Instrument Cluster
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Front Fog Lamp
See Exterior Lamps (page 123).
Headlamp High Beam
Hill Start Assist
E274708
See Hill Start Assist (page 227).
Parking Lamps
See Exterior Lamps (page 123).
Stability and Traction Control
E138639
E130458
See Stability Control (page 231).
See Traction Control (page 230).
Turn Signal
See Exterior Lamps (page 123).
144
Instrument Cluster
-------------------------------------------------------------------------------------------------------------------------------------------------------------
USING THE INSTRUMENT
CLUSTER DISPLAY CONTROLS
WARNING: Driving while distracted
can result in loss of vehicle control, crash
and injury. We strongly recommend that
you use extreme caution when using any
device that may take your focus off the
road. Your primary responsibility is the safe
operation of your vehicle. We recommend
against the use of any hand-held device
while driving and encourage the use of
voice-operated systems when possible.
Make sure you are aware of all applicable
local laws that may affect the use of
electronic devices while driving.
Note: Some options may appear slightly
different or not at all if the items are optional.
The controls are on the steering wheel. You
can control various systems on your vehicle
using the quick action menu (QAM) buttons.
E247519
Return button.
A
Toggle up.
B
OK button
C
Toggle down.
D
Phone QAM buttons.
E
Audio QAM button.
F
Navigation QAM button.
G
Settings QAM button.
H
Display QAM button.
I
Return Button
Press to go back or exit a menu.
Toggle Buttons
Press the toggle button up or down to scroll
through menu items.
OK Button
Press to make a selection.
Quick Action Menu Buttons
Press to open the correlating menu.
145
Instrument Cluster Display
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Status Indicator
E204495
A check in the box indicates a
feature is on, and unchecked
indicates the feature is off.
INSTRUMENT CLUSTER DISPLAY
MAIN MENU
Depending on your vehicle options, some
menu items can appear different or not at
all.
Note: For your safety, some features are
speed-dependent and could be unavailable
when your vehicle is above a certain speed.
Settings
Drive Control
Adaptive Steering
Driver Assistance
Speedometer km/h
Speedometer MPH
Vehicle
MyKey
146
Instrument Cluster Display
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Display
Gauges
Info/Trip/Fuel
Display Setup
TRIP COMPUTER
ACCESSING THE TRIP COMPUTER
Using the instrument cluster controls, select
the following to access the trip computer:
Action
Menu Item
Press the OK button.
Display
Press the OK button.
Info/Trip/Fuel
147
Instrument Cluster Display
-------------------------------------------------------------------------------------------------------------------------------------------------------------
RESETTING THE TRIP COMPUTER
Action
Menu Item
Press the OK button.
Display
Press the OK button.
Press and hold the OK button until the system reset confirmation
appears.
Info/Trip/Fuel
148
Instrument Cluster Display
-------------------------------------------------------------------------------------------------------------------------------------------------------------
RESETTING THE INDIVIDUAL TRIP
VALUES
Using the instrument cluster controls, select
the following to reset individual trip values:
Action
Menu Item
Press the OK button.
Display
Press the OK button.
Info/Trip/Fuel
Press and hold the OK button until the system reset confirmation
appears.
Trip 1
Press and hold the OK button until the system reset confirmation
appears.
Trip 2
CUSTOMIZING THE INSTRUMENT
CLUSTER DISPLAY
You can customize the gauge displays
through the following:
Action
Menu Item
Press the OK button.
Display
Press the OK button. Choose a gauge display.
Gauges
149
Instrument Cluster Display
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст