Abarth 500 (2019 year). Manual in english — page 10

Controls on steering wheel summary table

Text

Interaction (pressure/rotation)

Acceptance of incoming call;

Acceptance of the second incoming phone call and putting the active phone call on hold;

Display of the last 10 calls on the instrument panel

Rejection of incoming call;

Ending of call in progress;

Exit the display on the instrument panel of the last calls (only with call browsing active)

Deactivation/reactivation of the microphone during a phone conversation;

Activation/deactivation of the USB,

Bluetooth

® source Pause;

Activation/deactivation of radio Mute function

+/-

Short press: volume increase/decrease in single steps;

Long press: volume continuous increase/decrease until released

Activation of voice recognition;

Interruption of the voice message in order to give a new voice command;

Interruption of voice recognition

Turning right wheel upwards or downwards:

Short press (Radio mode): selection of next/previous station

Long press (Radio mode): scan higher/lower frequencies until released

Short press (USB,

Bluetooth

® mode): selection of previous/next track

Long press (USB,

Bluetooth

® mode): fast forward/rewind until released

Short press (phone mode): selection of next/previous call (only with call browsing active)

155

Switching the system
on/off

The system is switched on/off by
pressing the

(ON/OFF) button/knob.

Turn the button/knob clockwise to
increase the radio volume or
anticlockwise to decrease it.

Radio mode

After the desired radio station is
selected, the following information is
shown on the display:

At the top

: the list of radio stations

stored (preset) is displayed; the station
currently playing is highlighted.

In the middle

: display of the name of

the current radio station and the
buttons for selecting the previous or
next radio station.

At the bottom

: display of the following

buttons:

“Browse”: list of the radio stations

available;

“AM/FM”, “AM/DAB”, “FM/DAB”:

selection of the desired frequency band
(button reconfigurable according to
the band selected: AM, FM or DAB);

“Tune”: manual radio station tuning

(not available for DAB radio)

“Info”: additional information on the

source being listened to;

“Audio”: access to the “Audio

Settings” screen.

Audio menu

The following adjustments can be
carried out using the “Audio” menu:

“Equaliser” (where provided);

“Balance/Fader” (left/right and

front/rear audio balance adjustment);

“Speed/Volume” (speed-dependent

automatic volume control);

“Loudness” (where provided);

“Auto-On Radio”;

“Radio Off Delay”.

To exit the “Audio” menu, press the

/

Done button.

Media mode

Audio source selection

Press the "Source" button to select the
desired audio source among those
available: AUX, USB or

Bluetooth

®.

Applications used on portable devices
may be not compatible with the

Uconnect™

system.

Track selection (Browse)

With Media mode active, briefly press
buttons

/

to play the

previous/next track or keep buttons

/

pressed to fast rewind/

forward the track.

For languages not supported by the
system which feature special
characters (e.g. Greek), the keyboard is
not available. In these cases this
function will be limited.

Bluetooth® source

Pairing a Bluetooth® audio device

To pair a

Bluetooth

® audio device,

proceed as follows:

activate the

Bluetooth

® function on

the device;

press the MEDIA button on the front

panel;

if the “Media” source is active, press

the “Source” button;

select the

Bluetooth

® Media

source;

press the “Add Device” button;

search for

Uconnect™

on the

Blu-

etooth

® audio device (during the pair-

ing stage a screen is displayed showing
the progress of the operation);

when requested by the audio

device, enter the PIN code shown on
the system display or confirm on the
device the PIN displayed;

156

MUL

TIMEDIA

if the pairing procedure is completed

successfully, a screen is displayed.
Answer “Yes” to the question to pair the

Bluetooth

® audio device as favourite

(the device will have priority over all
other devices to be paired subse-
quently). If “No” is selected, the priority
is determined according to the order of
connection. The last device connected
will have the highest priority;

an audio device can also be paired

by pressing the PHONE button on
the front panel and by selecting
“Settings” or, from the “Settings” menu,
selecting “Phone/Bluetooth”.
If the

Bluetooth

® connection between

mobile phone and system is lost, con-
sult the mobile phone handbook.
The Radio may change the track being
played by modifying the name-device
in the

Bluetooth

® settings of the tele-

phone (where provided), if the device is
connected via USB after the

Blu-

etooth

® connection.

Phone mode

Phone mode activation

Press the PHONE button on the front
panel to activate the Phone mode.
Use the buttons on the display to:

dial the phone number (using the

graphic keypad on the display);

display and call the contacts in the

mobile phone phonebook;

display and call contacts from the

registers of previous calls;

pair up to 10 phones/audio device

to make access and connection easier
and quicker;

transfer calls from the system to the

mobile phone and vice versa and
deactivate the microphone audio for
private conversations.
The mobile phone audio is transmitted
through the vehicle’s audio system;
the system automatically mutes the
radio when the Phone function is used.
To consult the list of mobile phones
and supported functions, visit the
www.driveuconnect.eu website

Pairing a mobile phone

To pair the mobile phone, proceed as
follows:

activate the

Bluetooth

® function on

the mobile phone;

press the PHONE button on the

front panel;

if no phone is paired with the system

yet, the display shows a dedicated
screen;

select “Yes” to start the pairing

procedure, then search for the

Uconnect™

device on the mobile

phone (if "No" is selected, the Phone
main screen is displayed);

when prompted by the mobile

phone, use its keypad to enter the PIN
code shown on the system display
or confirm on the mobile phone the PIN
displayed;

from the “Phone” screen you can

always pair a mobile phone by pressing
the “Settings” button: press the “Add
Device” button and proceed as
described above;

during the pairing stage a screen is

displayed showing the progress of
the operation;

when the pairing procedure is

completed successfully, a screen is
displayed: answer “Yes” to the question
to pair the mobile phone as favourite
(the mobile phone will have priority over
all other mobile phones to be paired
subsequently). If no other devices are
paired, the system will consider the first
associated device as favourite.
NOTE After updating the phone
software, for proper operation, it is
recommended to remove the phone
from the list of devices linked to the
radio, delete the previous system
pairing also from the list of

Bluetooth

®

devices on the phone and make a new
pairing.

157

Making a phone call

The operations described below can
only be accessed if supported by
the mobile phone in use.
For all functions available, refer to the
mobile phone owner's handbook.
A call can be made by:

selecting the

icon (mobile

phone phonebook);

selecting “Recent Calls”;

selecting the

icon;

pressing the “Redial” button.

Text message reader

The system can read the messages
received by the mobile phone.
To use this function the mobile phone
must support the SMS exchange
function through

Bluetooth

®.

Where operation is not supported by
the phone, the relative graphic

button is deactivated (goes grey).

When a text message is received,
the display will show a screen where
the options “Listen”, “Call” or “Ignore”
can be selected.
Press the

button to access the list

of SMS messages received by the
mobile phone (the list displays a
maximum of 60 messages received).

Browsing SMS messages

(where provided)
Using the steering wheel commands,
you can view and manage the last
10 SMS messages received on the
instrument panel. To use this function
the mobile phone must support the
SMS exchange function through

Blu-

etooth

®.

Select “Phone” on the instrument panel
menu and then select “SMS reader”
using the arrow keys on the steering
wheel controls.
The ‘SMS reader’ submenu allows the
last 10 SMS messages to be displayed.
WARNING Some mobile phones may
not take the SMS delivery confirmation
settings into account when interfacing
with

Uconnect™

. If an SMS message

is sent via

Uconnect™

, the user could

face an additional cost, without any
warning, due to the SMS delivery
confirmation request sent by the phone.
For any problems related to the above,
contact your telephone service provider.

SMS message options

Default text messages are stored in the
system memory and can be sent to
answer a received message or as
a new message:

Yes.

No.

Okay.

I can't talk right now.

Call me.

I'll call you later.

I'm on my way.

Thanks.

I will be late.

Stuck in traffic.

Start without me.

Where are you?

Are you there yet?

I need directions.

I'm lost.

See you later.

I will be 5 (or 10, 15, 20, 25, 30, 45,

60)* minutes late.

See you in 5 (or 10, 15, 20, 25, 30,

45, 60)* minutes.
* Only use the numbers listed,
otherwise the system will not take the
message.
NOTE See the dedicated section for
details on how to send a text message
using the voice commands.

158

MUL

TIMEDIA

APPS Mode

Press the APPS button on the front
panel to display the following operating
settings:

External temperature

Clock

Compass (NAV versions only)

Trip (where present)

Uconnect™ LIVE

Uconnect™ LIVE
Services

Press the APPS button to access a
radio menu which shows all the
application functions of the system,
such as: Trip computer (where present),
Settings, Compass (where present),

Uconnect™ LIVE

Applications.

If there is a

Uconnect™ LIVE

icon, the

system is set up for the connected
services and allows the applications to
be used directly from the radio, for a
more efficient and advanced use of the
vehicle. The application functions are
present according to the vehicle
configuration and to the market.
To use the

Uconnect™LIVE

services,

you must:

Download the

Uconnect™ LIVE

App from the "Apple Store" or "Google
play" on your compatible smartphone,
making sure that the data connection is
enabled.

Use the

Uconnect™ LIVE

App to

register on www.driveuconnect.eu
or on the www.fiat.it website.

Start the

Uconnect™ LIVE

App on

the smartphone and enter your details.
For further information about the
services available in your market, visit
the www.DriveUconnect.eu website.

First access to the car

Once you have launched the

Uconnect™ LIVE

App and entered

your details, you have to pair the

Blu-

etooth

® with your smartphone and the

radio, as described in the "Pairing a
mobile phone" chapter, to access the

Uconnect™

LIVE services in your

vehicle.
The list of supported mobile phones is
available on www.driveuconnect.eu.
When pairing is complete, the
connected services can be accessed
by pressing the

Uconnect™ LIVE

icon

on the radio.
When the activation process is
complete, a message will inform the
user. If a personal profile is necessary
for the services, your accounts can
be connected through the

Uconnect™

LIVE

App, or in your personal area on

www.driveuconnect.eu.

User not connected

If the user does not pair the phone with

Bluetooth

®, when the

Uconnect™

LIVE

button is pressed, the radio menu

shows disabled icons, except for

eco-

:Drive™

.

Further information about the

eco:Drive™

functions is available in

the dedicated chapter.

Settings of the Uconnect™ services
that can be managed through the
radio

The "Settings" section can be accessed
through the

icon in the

Uconnect™

LIVE

services menu on the radio. In

this section the user can check the
system options and change them
according to their preferences.

Systems updating

If an update is available for the

Uconnect™ LIVE

system while you

are using the

Uconnect™

services,

you will be informed with a message on
the radio screen.
The update requires downloading the
new version of the

Uconnect™ LIVE

services management software.
The update is made using the data
connection of the paired smartphone.
The amount of traffic generated will
be communicated to the user.

159

THE Uconnect™ LIVE APP

The

Uconnect™ LIVE

App must be

installed on your smartphone to access
the connected services on the car.
This can be used to manage your
profile and customise your

Uconnect™ LIVE

experience.

The App can be downloaded from "App
Store" or "Google Play".
For safety reasons, the App cannot be
accessed when the phone is paired
with the radio.
Personal details (e-mail and password)
are required to access the

Uconnect™

LIVE

radio services, therefore your

personal account is protected and can
only be accessed by the real user.

Connected services that can be
accessed on the vehicle

The

Uconnect™ LIVE

services

available in the radio menu may change
depending on the market.
The

eco:Drive™

and my:Car

applications were developed to improve
the customer's driving experience,
therefore they are available in all
markets where the

Uconnect™ LIVE

services can be accessed.
For further information visit the
www.driveuconnect.eu website.

If the navigation system is installed in
the radio, accessing the

Uconnect™

LIVE

services enables use of the

TomTom LIVE services. Further
information about the LIVE functions is
available in the dedicated chapter.

eco:Drive™

The

eco:Drive™

application allows you

to display your driving behaviour in
real time, in order to help you reach a
more efficient driving style as far as
consumption and emissions are
concerned.
In addition, the data can be saved on a
USB flash drive, and the data analysis
can be made on your personal
computer thanks to the

eco:Drive™

desktop application, available on
www.fiat.it or www.driveuconnect.eu.
Driving style is evaluated by means
of four indices which monitor the
following parameters:

Acceleration

Deceleration

Transmission

Speed

eco:Drive™ display

Press the

eco:Drive™

button to

interact with the function.

A screen will be displayed on the radio,
showing the 4 indices described above.
These indices are grey until the system
has enough data to evaluate the driving
style.
Once sufficient data are available, the
indices will have 5 colours depending
on the evaluation: dark green (very
good), light green, yellow, orange and
red (very bad).
It represents eco-friendliness of the
driving style: from 0 (low) to 100 (high).
In the event of extended inactivity the
display will show the average of the
indices up to that moment (“Average
index”) then the indices will be coloured
again in real time as soon as the car is
restarted.
To check the data average for the
previous trip (the “trip” starts when the
ignition key is turned to the MAR
position and stops when it is turned to
STOP), select the “Previous Route”
button.
The details of the previous trip can also
be displayed by pressing the "Details"
button to show trip duration (time
and mileage) and average speed.

160

MUL

TIMEDIA

Recording and transferring trip data

The trip data can be stored in the
system memory and transferred using a
suitably configured USB memory stick
or by

Uconnect™ LIVE

App. This

allows you to display the history of the
collected data, showing the complete
analysis of the trip data and of your
driving style.
Further information is available at
www.driveuconnect.eu.
WARNING Do not remove the USB
memory stick nor unpair the
smartphone and the

Uconnect™ LIVE

App before the system has
downloaded the data, otherwise it
could be lost.
During the transfer of data to the
devices, messages may appear on the
radio display to guide the user correctly
through the operation; follow these
instructions. These messages are only
displayed with the ignition key at STOP
and when a delay in the system
switching off is set. The data are
automatically transferred to the devices
when the engine is switched off.
Transferred data will be deleted from
the system memory in this manner. You
can choose to store the trip data or
not, by pressing the "Settings" button
and by setting the storage activation
and the USB or Cloud transfer mode.

NOTES When the USB memory stick is
full, the warning messages are shown
on the radio display.
When the

eco:Drive™

data are not

transferred to USB memory stick for a
long time, the internal memory of the

Uconnect™ LIVE

system may be

exhausted. Follow the instructions given
by the messages on the radio display.

my:Car

my:Car allows you to keep the
condition of your car always under
control.
my:Car can detect malfunction in real
time and inform the user about the
expiry of the servicing interval. Press
the "my:Car" button to interact with the
application.
The display will show a screen with the
"care:Index" section, which provides
all the detailed information about the
status of the car. Press the "Active
warnings" button (if present) to show
the details of the vehicle's faults which
caused a warning light to switch on.
The vehicle status can be seen both on
www.driveuconnect.eu or through the

Uconnect™LIVE

App.

Settings

Press the

button on the front panel

to display the main “Settings” menu.
NOTE The menu items displayed vary
according to the versions.
The menu includes the following items:

Display;

Units;

Voice controls;

Clock & Date;

Lights (where provided);

Doors & Locks;

Vehicle Off Options;

Audio;

Phone /

Bluetooth

®;

Configurat. SiriusXM (where

provided);

Radio Setup;

Restore settings;

Clear Personal Data.

Navigation (Uconnect™
5" Nav LIVE only)

Planning a route

IMPORTANT In the interest of safety
and to reduce distractions while you are
driving, you should always plan a route
before you start driving.
To plan a route, do the following:

tap the screen to open the Main

menu;

161

tap "Navigate to" or "Drive to";

tap “Address”. You can change the

country or state setting by tapping
the flag before you select a city;

enter the town or city name, or the

postcode. Towns with similar names
are shown in the list while you type;

enter the street name. Streets with

similar names are shown in the list while
you type. When the correct street
name appears in the list, tap the name
to select the destination;

enter the house number, then tap

“Done”;

if in the Advanced settings menu the

“Show location preview” option is
active, your position is shown on the
map. Tap “Select” to continue or tap
“Back” to enter another address;

when the new route is shown, tap

“Done”. For more information about the
route, tap on “Details”. To change
your route, for example, to travel via a
particular location or to select a new
destination, tap “Change route”;
You are guided to your destination,
using spoken instructions and
on-screen directions.

Updating the map

Two modes for downloading a map
update are available:

Most recent maps guarantee: if a

new map is available for your system
within 90 days of initial use, you can
download it once free of charge.

Map update: you can purchase a

new version of the map installed on
your system.

Preparing a USB device

To update the map, use a USB device
that meets the following requirements.

Ideally, the USB device should be

empty.

The USB device must have at least

8 GB of memory free.

The USB device must use a FAT-32

file system.

The USB device must not be

blocked and must allow files to be
saved.
NOTE: the use of a memory stick is
recommended, while the use of mass
storage devices, such as mobile
phones or multimedia players, is not
recommended.
To prepare a USB device, proceed as
follows:

Select “Navigation updates” in the

“Settings” menu. You are asked
whether you wish to prepare a USB
device for downloading updates.

Select Yes.

Insert the USB device.

NOTE If the system continues to ask
you to insert the USB device, check
that the device meets the requirements
indicated previously, then retry.
The system starts to prepare the USB
device.
When the USB device is ready, the
following message is displayed.
Remove the USB device and connect it
to the computer. The new map can
now be downloaded to the USB
device.

TomTom HOME installation

To install TomTom HOME and create a
MyTomTom account, proceed as
follows:

Download and install the TomTom

HOME application on the computer. On
the computer, access tomtom.com/
getstarted. Select “Download TomTom
HOME”, then follow the instructions
provided.

Connect the USB device prepared

with the computer. TomTom HOME
is started automatically.

162

MUL

TIMEDIA

Select “Enter” in the top right corner

of TomTom HOME.

Select “Create account” and enter

the required details to create a
MyTomTom account. A MyTomTom
account is required to receive map
updates.
After the account is created, you are
asked whether you wish to connect the

Uconnect™

system to your account.

The USB device prepared represents
your

Uconnect™

system.

Select “Connect device”, then select

“close”.
A map can now be downloaded to the
USB device.

Download a map

The map can be updated in two ways:

Most recent maps guarantee: if a

new map is available for your system
within 90 days of initial use, it can
be downloaded once free of charge.

Map update: it is possible to

purchase a new version of the map
installed on the system.
To check availability or purchase a map,
make sure that you have prepared a
USB device and installed TomTom
HOME on your computer.
Connect the USB device to the
computer.

Downloading a map

If a map update is available for the
system, this update is included in the
list of updates available.
NOTE If the most recent map is already
installed on the system, the update is
not proposed.
Select the map that you wish to
download, then select “Update and
install”.
The map is downloaded and copied to
your USB device.
Select “Done” when the process is
complete.
NOTE Don’t disconnect the USB device
from the computer while map
downloading and copying is in
progress.
The map can now be installed on the
system.

Installing the map

After downloading a map to your USB
device, it can be installed on your
system.
IMPORTANT The map update MUST
be made with the vehicle engine
running and may require more than 30
minutes.
IMPORTANT Do not disconnect the
USB device during the map installation
process, otherwise installation will be
interrupted.

Insert the USB device containing the

new map in the

Uconnect™

system.

The system detects a new map on
the USB device.

Select “Start”.

Keep the device inserted. Before
updating the map, the system indicates
that this process may take several
minutes. Select “OK”.
NOTE Do not remove the USB device
and do not disconnect the system’s
power supply before the update is
complete. The system cannot be used
until the update is completed correctly.
If the update is interrupted, the system
update is started again.
Once the map has been updated, the
following message is displayed.

Click on “Close”.

The new map is now available on the
system.

Troubleshooting

The following problems may occur
during the update:

The map on the USB device is not

valid. In this case, download the map to
the USB device again, using TomTom
HOME. It may be necessary to prepare
the USB device again.

163

The version of the map on the USB

device is the same as or is a previous
version of the one already on the
system. In this case, download the map
to the USB device again, using
TomTom HOME. It may be necessary to
prepare the USB device again.

Voice commands

NOTE For languages not supported by
the system, voice commands are not
available. To use the voice commands,
press the

button on the steering

wheel (”Voice” button) and say out loud
the command you want to activate.

Global

The following voice commands can be
given after pressing the

button on

the steering wheel:

Help

Cancel

Repeat

Voice Prompts

Phone

The following voice commands can be
given after pressing the

button on

the steering wheel and saying "Go
to telephone":

Call

Dial

Redial

Call back

Recent calls

Calls made

Missed calls

Calls received

PhoneBook

Search

Show SMS

Radio

The following voice commands can be
given after pressing the

button on

the steering wheel:

Tune to XXX FM

Tune to XXX AM

Tune to Radio XXX

Tune to DAB channel

Media

The following voice commands can be
given after pressing the

button on

the steering wheel:

Play song...

Play album…

Play artist…

Play genre…

Play playlist…

Play podcast…

Play audiobook…

Select the source

View

Navigation (Uconnect™ 5" Nav LIVE
only)

The following voice commands can be
given after pressing the

button on

the steering wheel:

Drive Home

2D view

3D vision

Cancel Route

Add Favourite

Repeat instruction

164

MUL

TIMEDIA

UCONNECT™ 7” HD LIVE - UCONNECT™ 7” HD NAV LIVE

.

Controls on front panel

122

AB0A0399C

165

Front panel control summary table

Button

Functions

Mode

Switching on

Short button press

Switching off

Short button press

Volume adjustment

Left/right rotation of knob

Volume activation/deactivation (Mute/Pause)

Short button press

Display on/off

Short button press

Exit the selection/return to previous screen

Short button press

SCROLL TUNE

Scrolling the list or tuning to a radio station
Media source track change

Left/right rotation of knob

Confirmation of the option displayed
in Radio mode, shows station list;
in Media mode, allows to scroll source contents

Short button press

166

MUL

TIMEDIA

Summary table of display buttons

Button

Functions

Mode

Radio

Access to the Radio mode

Press button

Media

Source selection: USB, AUX,

Bluetooth

®

Press button

Phone

Phone data display

Press button

Uconnect™

Access the additional functions (e.g. Compass display,

Uconnect™

LIVE

services)

Press button

Nav

(*)

Access to the navigation function

Press button

Settings

Access the settings menu

Press button

Trip

Access to the Trip menu

Press button

(*)

Uconnect™ 7" HD Nav LIVE

versions only

167

Controls on the steering wheel

The controls for the main system functions are present on the steering wheel to make control easier. The activation of the
function selected is controlled, in some cases, by how long the button is pressed (short or long press) as described in the table
below.

123

AB0A0368C

168

MUL

TIMEDIA

Controls on steering wheel summary table

Buttons

Interaction

Acceptance of incoming call

Acceptance of the second incoming call and putting the active call on hold

Display of the last 10 calls on the instrument panel

Activation of voice recognition

Interruption of the voice message in order to give a new voice command

Interruption of voice recognition

Rejection of incoming call

Ending of call in progress

Exit the display on the instrument panel of the last calls (only with call browsing active)

Short press (Radio mode): selection of next/previous station

Long press (Radio mode): scan higher/lower frequencies until released

Short press (USB,

Bluetooth

® mode): selection of previous/next track

Long press (USB,

Bluetooth

® mode): fast forward/rewind until released

Short press (phone mode): selection of next/previous call (only with call browsing active)

+/-

Short press: volume increase/decrease in single steps

Long press: volume continuous increase/decrease until released

169

Switching the system
on/off

The system is switched on/off by
pressing the

button/knob.

Turn the button/knob clockwise to
increase the radio volume or
anticlockwise to decrease it. The
electronic volume adjustment control
rotates continuously (360°) in both
directions, without stop positions.

Radio mode

After the desired radio station is
selected, the following information is
shown on the display:

At the top

: the list of radio stations

stored (preset) is displayed; the station
currently playing is highlighted.

In the middle

: display of the name of

the current radio station and the
buttons for selecting the previous or
next radio station.

On the left:

display of the "AM", "FM”,

“DAB” buttons for selecting the desired
frequency band (reconfigurable button
depending on the selected band:
AM, FM or DAB);

On the right:

display of the following

buttons:

“Info”: additional information on the

source being listened to;

“Map": navigation map view

(

Uconnect™ 7" HD Nav LIVE

versions only).

At the bottom:

display of the following

buttons:

“Browse": list of the radio stations

available;

/

: select previous/next

radio station;

“Tune”: manual radio station tuning;

“Audio”: access to the “Audio

Settings” screen.

Audio menu

To access the "Audio" menu press the
"Audio" button located at the bottom of
the display.
The following adjustments can be
carried out using the “Audio” menu:

"Balance/Fader" (left/right and

front/rear audio balance adjustment);

“Equaliser” (where provided);

“Speed Adj Volume” (speed-

dependent automatic volume control);

“Loudness” (where provided);

"AUX volume compensation" (off in

radio mode, selectable only with AUX
source active);

“AutoPlay”;

“Auto-On Radio”.

Media mode

Press the "Media" button to select the
desired audio source among those
available: USB,

Bluetooth

®, AUX.

IMPORTANT NOTE Applications used
on portable devices may be not
compatible with the

Uconnect™

system
After Media mode is selected, the
following information is shown on the
display:

At the top:

information on the track

being played and the following graphic
buttons:

“Repeat”: to repeat the track being

played;

“Shuffle”: to play the tracks in

random order.

In the middle:

information on the track

being played.

On the left:

display of the following

buttons:

Selected device or audio source;

“Select Source”: select the required

audio source.

On the right:

display of the following

buttons:

“Info”: additional information on the

track being played;

“Tracks”: list of available tracks.

170

MUL

TIMEDIA