Dodge Caliber. Manual — part 1346
2. Carefully, pry down headliner and install fastener,
washers and nuts.
3. Tighten nuts 20 N·m (15 ft. lbs).
4. Install gas props.
5. Connect liftgate harness (1).
PM
LIFTGATE
23 - 121
LATCH
REMOVAL
1. Remove three fasteners (1).
2. Disconnect wire connectors.
3. Disconnect cable from outer handle hole.
4. Disconnect cable from latch.
INSTALLATION
1. Connect wire connectors.
2. Install latch assembly into liftgate pocket.
3. Install three fasteners (1).
4. Tighten fasteners to 8 N·m (6 ft. lbs.).
5. Install cable fastener to liftgate inner while working
the cable upward.
6. Guide cable upward through opening and tuck into
the outer handle hole.
23 - 122
LIFTGATE
PM
LIFTGATE
REMOVAL
1. Open liftgate.
2. Disconnect washer hose.
3. Disconnect liftgate harness (1).
4. Disconnect cable from handle.
5. With the help from an assistant, support liftgate
and disconnect Prop rods. (Refer to 23 - BODY/
DECKLID/HATCH/LIFTGATE/TAILGATE/PROP
ASSEMBLY - REMOVAL)
6. Remove fasteners (2) attaching liftgate (1) to lift-
gate hinge (3).
PM
LIFTGATE
23 - 123
INSTALLATION
1. With the help of an assistant, place liftgate (1) onto
liftgate hinges (3).
2. Torque nuts (2) to 15 N ·m (11 ft. lbs).
3. Install prop rods. (Refer to 23 - BODY/DECKLID/
HATCH/LIFTGATE/TAILGATE/PROP ASSEMBLY -
INSTALLATION)
4. Install liftgate harness (1).
5. Install washer hose.
23 - 124
LIFTGATE
PM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст