Dodge Caliber. Manual — part 373
COURTESY/READING LAMP
REMOVAL
BULB
1. Insert a trim stick between the lamp bezel (4) and
courtesy/reading lamp lens (3) on the left side of
the courtesy/reading lamp at (1).
2. Carefully swing lamp lens (3) toward the right side
of the vehicle so that the tab (2) on the lens can
come out of the lamp unit (4).
3. Remove bulb (3) from lamp unit (2).
PM
LAMPS/LIGHTING - INTERIOR - SERVICE INFORMATION
8L - 125
UNIT
1. Insert a trim stick between the lamp bezel (4) and
courtesy/reading lamp lens (3) on the left side of
the courtesy/reading lamp at (1).
2. Carefully swing lamp lens (3) toward the right side
of the vehicle so that the tab (2) on the lens can
come out of the lamp unit (4).
3. As shown from the backside, once the tab (1) from
the lens is out of the way, the right side will pull
down from the headliner and then pull to the right
to release the unit retaining tab (2).
8L - 126
LAMPS/LIGHTING - INTERIOR - SERVICE INFORMATION
PM
4. Disconnect the courtesy/reading lamp unit (1) elec-
trical connector (2).
INSTALLATION
BULB
1. Position bulb (3) in holder and firmly press into
place.
NOTE: When installing the lens (5), make sure that
the tab on the lens (4) is inserted on the right side
of the courtesy/reading lamp unit first.
PM
LAMPS/LIGHTING - INTERIOR - SERVICE INFORMATION
8L - 127
2. Once the right side tab (2) is in the headliner, roll
up the left side of the lens (3) until it snaps into
place at (1).
UNIT
1. Connect the courtesy/reading lamp (1) electrical
connector (2).
8L - 128
LAMPS/LIGHTING - INTERIOR - SERVICE INFORMATION
PM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст