Dodge Caliber. Manual — part 1254
7. Remove the nut (1) holding the shift lever (2) to the
manual shaft.
8. Remove the shift lever from the manual shaft.
9. Remove the bolts (2) holding the transmission
range sensor (TRS) (1) to the transaxle case.
10. Remove the (TRS) transmission range sensor (1)
from the transaxle case and the manual shaft.
PM
AUTOMATIC - CVT-SERVICE INFORMATION
21 - 315
11. Remove the snap ring (1) from the terminal body
(2) and press the terminal body into the transaxle
case.
CAUTION: Be careful not to cause damage to the
terminal body.
12. Remove CVT fluid cooler (1) from transaxle case.
Remove and discard the CVT fluid cooler o-ring.
21 - 316
AUTOMATIC - CVT-SERVICE INFORMATION
PM
13. Remove the bolts holding the CVT fluid filter to
the transaxle case.
14. Remove the CVT fluid filter (1) from the transaxle
case.
15. Remove the converter housing mounting bolts.
PM
AUTOMATIC - CVT-SERVICE INFORMATION
21 - 317
16. Remove the converter housing (1) by tapping with
plastic hammer.
CAUTION: There is a possibility that the drive
sprocket adjusting shim may be dislodged and fall
out.
17. Remove outer race of reduction gear bearing (1)
from the converter housing using Puller 7794-A
and Slide Hammer C-637.
21 - 318
AUTOMATIC - CVT-SERVICE INFORMATION
PM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст