Dodge Caliber. Manual — part 1111
MOUNT-LEFT
REMOVAL
1. Remove air cleaner assembly.
2. Disconnect negative cable from battery.
3. Remove PCM.
4. Remove PCM mounting bracket.
5. Support transaxle with a suitable jack.
6. Remove left mount through bolt (3).
7. Remove mount to transaxle bolts (5).
8. Remove left mount bracket (4).
9. Remove left mount bracket to body frame rail fas-
teners.
10. Remove mount.
INSTALLATION
1. Install mount.
2. Install left mount to frame rail bolts and torque to
28N·m (250 in. lbs.).
3. Install left mount bracket (4).
4. Install mount to transaxle bolts (5) and torque to 68
N·m (50 ft.lbs.).
5. Install mount through bolt (3) and torque to 115
N·m (85 ft.lbs.).
6. Remove jack.
7. Install PCM mounting bracket.
8. Install PCM.
9. Connect negative battery cable.
10. Install air cleaner assembly.
PM
ENGINE 2.4L WORLD
9 - 1731
MOUNT-RIGHT
REMOVAL
1. Remove coolant reservoir and set aside.
2. Remove power steering reservoir and set aside.
3. Remove windshield washer bottle.
4. Remove power steering line support bracket from
engine mount.
5. Support transaxle with a block of wood and a suit-
able jack.
6. Remove engine mount through bolt (4).
7. Remove engine mount bracket bolts (3).
8. Remove engine mount retaining bolts.
9. Remove engine mount.
INSTALLATION
1. Install engine mount.
2. Install engine mount retaining bolts and torque to
28 N·m (250 in. lbs.).
3. Install engine mount bracket and torque bolts (3) to
68 N·m (50 ft. lbs.).
4. Install engine mount through bolt (4) and torque to
115 N·m (85 ft. lbs.).
5. Remove jack.
6. Install power steering line support bracket at
engine mount.
7. Install windshield washer bottle.
8. Install power steering reservoir.
9. Install coolant reservoir.
9 - 1732
ENGINE 2.4L WORLD
PM
MOUNT-FRONT
REMOVAL
1. Raise vehicle.
2. Remove fore aft member (3) to mount (4) bolts.
3. Remove mount through bolt (1).
4. Remove fore aft member (3) mounting bolts and
remove.
5. Remove front mount (4).
INSTALLATION
1. Install mount (4) and tighten bolts.
2. Install fore aft member (3) and tighten bolts.
3. Install mount through bolt (1) and tighten.
4. Lower vehicle.
PM
ENGINE 2.4L WORLD
9 - 1733
MOUNT-REAR
REMOVAL
1. Remove rear mount retaining bolts (4).
2. Remove rear mount through bolt (1).
3. Remove oxygen sensor connector (2) from mount.
4. Remove rear mount (3).
INSTALLATION
1. Install rear mount (3).
2. Install rear mount retaining bolts (4) and tighten.
3. Install rear mount through bolt (1) and tighten.
4. Install oxygen sensor connector (2) retainer to
mount (3).
9 - 1734
ENGINE 2.4L WORLD
PM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст