Dodge Caliber. Manual — part 1137
8. Connect line and install venturi module.
9. Position fuel pump module in tank. Make sure the
alignment tab line up on the fuel tank and pump
module for Gas or Diesel fuel tanks.
10. While holding the pump module in position, install
lock ring and use special tool #9340 to tighten
lock ring.
PM
FUEL DELIVERY
14 - 21
11. Connect electrical connector.
12. Install plastic cover.
13. Install rear cushion.
14 - 22
FUEL DELIVERY
PM
14. Install the negative battery cable.
15. Install the air cleaner lid, connect the inlet air tem-
perature sensor and makeup air hose.
16. Fill fuel tank with clean fuel. Use the Scan Tool to
pressurize the system and check for leaks.
FRONT WHEEL DRIVE
NOTE: The pump has to properly located to the tank for the fuel gauge to work properly.
1. Wipe seal area of tank clean. Place a new seal
between the tank threads and the pump module
opening.
2. Install module.
PM
FUEL DELIVERY
14 - 23
3. Position fuel pump module in tank. Make sure the
alignment tab line up on the fuel tank and pump
module for Gas or Diesel fuel tanks.
4. While holding the pump module in position, install
lock ring and use special tool #9340 to tighten lock
ring.
5. Install plastic cover.
14 - 24
FUEL DELIVERY
PM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст