Dodge Caliber. Manual — part 473
B220A-OCCUPANT RESTRAINT CONTROLLER INTERNAL 4
•
When Monitored:
With the ignition on. The module’s on board diagnostics continuously performs internal circuit tests.
•
Set Condition:
This DTC will set if the module identifies an out of range internal circuit.
Possible Causes
OCCUPANT RESTRAINT CONTROLLER
Diagnostic Test
1.
REPLACE OCCUPANT RESTRAINT CONTROLLER
Turn the ignition on.
WARNING: To avoid personal injury or death, turn the ignition off, disconnect the battery and wait two min-
utes before proceeding.
WARNING: If the Occupant Restraint Controller is dropped at any time, it must be replaced. Failure to take
proper precautions could result in accidental airbag deployment and personal injury or death.
Repair
Replace the Occupant Restraint Controller in accordance with the Service Information.
Perform *AIRBAG SYSTEM VERIFICATION TEST - VER 1.
PM
RESTRAINTS - ELECTRICAL DIAGNOSTICS
8O - 289
B220B-OCCUPANT RESTRAINT CONTROLLER FIRING STORED ENERGY
•
When Monitored:
With the ignition on. The module’s on board diagnostics continuously performs internal circuit tests.
•
Set Condition:
This DTC will set if the module identifies an out of range internal circuit.
Possible Causes
OCCUPANT RESTRAINT CONTROLLER
Diagnostic Test
1.
REPLACE OCCUPANT RESTRAINT CONTROLLER
Turn the ignition on.
WARNING: To avoid personal injury or death, turn the ignition off, disconnect the battery and wait two min-
utes before proceeding.
WARNING: If the Occupant Restraint Controller is dropped at any time, it must be replaced. Failure to take
proper precautions can result in accidental airbag deployment and personal injury or death.
Repair
Replace the Occupant Restraint Controller in accordance with the Service Information.
Perform *AIRBAG SYSTEM VERIFICATION TEST - VER 1.
8O - 290
RESTRAINTS - ELECTRICAL DIAGNOSTICS
PM
B220C-OCCUPANT RESTRAINT CONTROLLER ACCELEROMETER 1 INTERNAL
•
When Monitored:
With the ignition on. The module’s on board diagnostics continuously performs internal circuit tests.
•
Set Condition:
This DTC will set if the module identifies an out of range internal circuit.
Possible Causes
OCCUPANT RESTRAINT CONTROLLER
Diagnostic Test
1.
REPLACE OCCUPANT RESTRAINT CONTROLLER
Turn the ignition on.
WARNING: To avoid personal injury or death, turn the ignition off, disconnect the battery and wait two min-
utes before proceeding.
WARNING: If the Occupant Restraint Controller is dropped at any time, it must be replaced. Failure to take
proper precautions can result in accidental airbag deployment and personal injury or death.
Repair
Replace the Occupant Restraint Controller in accordance with the Service Information.
Perform *AIRBAG SYSTEM VERIFICATION TEST - VER 1.
PM
RESTRAINTS - ELECTRICAL DIAGNOSTICS
8O - 291
B220D-OCCUPANT RESTRAINT CONTROLLER ACCELEROMETER 2 INTERNAL
•
When Monitored:
With the ignition on. The module’s on board diagnostics continuously performs internal circuit tests.
•
Set Condition:
This DTC will set if the module identifies an out of range internal circuit.
Possible Causes
OCCUPANT RESTRAINT CONTROLLER
Diagnostic Test
1.
REPLACE OCCUPANT RESTRAINT CONTROLLER
Turn the ignition on.
WARNING: To avoid personal injury or death, turn the ignition off, disconnect the battery and wait two min-
utes before proceeding.
WARNING: If the Occupant Restraint Controller is dropped at any time, it must be replaced. Failure to take
proper precautions can result in accidental airbag deployment and personal injury or death.
Repair
Replace the Occupant Restraint Controller in accordance with the Service Information.
Perform *AIRBAG SYSTEM VERIFICATION TEST - VER 1.
8O - 292
RESTRAINTS - ELECTRICAL DIAGNOSTICS
PM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст