Dodge Caliber. Manual — part 1338
B-PILLAR TRIM
REMOVAL
1. Remove lower B-pillar trim from B-pillar (5).
2. Remove plug.
3. Remove screw (3).
4. Remove trim (1) by pulling tab (2) on top outward.
INSTALLATION
1. Install B-pillar (1) trim to B-pillar (5) by inserting
B-pillar trim tab (2) into B-pillar slot.
2. Push B-pillar trim into position ensuring bottom clip
(4) has seated.
3. Add screw (3) and reinstall plug.
PM
INTERIOR
23 - 89
B-PILLAR LOWER TRIM
REMOVAL
1. Using special tool C-4755, pry off B-pillar lower
trim.
2. Remove from vehicle.
INSTALLATION
1. Insert lower tabs on B-pillar lower trim (1) onto sill
panel.
2. Hand tap on clip locations ensuring clips are prop-
erly seated.
23 - 90
INTERIOR
PM
UPPER C-PILLAR TRIM
REMOVAL
1. Remove lower quarter.
2. Remove lower seat anchors from seat belt opening
(1).
3. Remove upper quarter by pulling on rear portion of
upper quarter disengaging clips from metal holes in
body (4).
4. Remove front lower portion (3) by pulling clip loose.
5. Slide quarter panel (2) downward and remove from
vehicle.
INSTALLATION
1. Pass seat belt anchors through trim openings (1).
2. Install quarter trim (2) by sliding hook at top and
locating 4–way locator into the body side sheet
metal holes (4).
3. Complete installation by aligning metal clips and
snaping until properly seated.
PM
INTERIOR
23 - 91
REAR QUARTER PANEL TRIM
REMOVAL
1. Remove liftgate scuff plate. (Refer to 23 - BODY/
INTERIOR/LIFTGATE SCUFF PLATE - REMOVAL)
2. Remove cargo floor. (Refer to 23 - BODY/INTERI-
OR/COVER - REMOVAL)
3. Remove B - pillar lower trim. (Refer to 23 - BODY/
INTERIOR/B-PILLAR LOWER TRIM - REMOVAL)
4. Remove scuff plate door sill. (Refer to 23 - BODY/
INTERIOR/DOOR SILL TRIM - REMOVAL)
5. Using trimstick C-4755, remove the seat striker
bezel.
23 - 92
INTERIOR
PM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст