Dodge Caliber. Manual — part 1328
![](/vehicles/wlang/mes/cill/yes.png)
SPEAKER AND GRILLE
REMOVAL
1. Using trim stick C–4755, find service notch (1)
located at the bottom of speaker grille and pry up
speaker grille.
2. Remove two screws attaching speaker to door
panel (3).
3. Remove two screws attaching speaker (2) to door
module (1).
4. Disconnect wire connector.
PM
DOORS - REAR
23 - 49
![](/vehicles/wlang/mes/cill/ched.png)
INSTALLATION
1. Place speaker (2) up to door module (3).
2. Connect wire connector.
3. Install screws fastening speaker to door module.
4. Place speaker grille (1) up to door module and
install fasteners.
23 - 50
DOORS - REAR
PM
![](/vehicles/wlang/mes/cill/verdios.png)
GLASS RUN CHANNEL
REMOVAL
1. Remove door module. (Refer to 23 - BODY/
DOORS - REAR/DOOR - REMOVAL)
2. Remove glass run fastener (2).
3. Remove glass run from door.
INSTALLATION
1. Lower glass run into glass run door channel.
2. Install fastener (2).
3. Install door module. (Refer to 23 - BODY/DOORS -
REAR/DOOR - INSTALLATION)
PM
DOORS - REAR
23 - 51
EXTERIOR
TABLE OF CONTENTS
page
page
DOOR-FUEL FILL
SPLASH SHIELD-FRONT WHEELHOUSE
SPLASH SHIELD-REAR WHEELHOUSE
SIDE VIEW MIRROR
23 - 52
EXTERIOR
PM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст