Dodge Caliber. Manual — part 1192
3. If servicing ring gear (2) as well, remove remaining
ring gear-to-case bolts and remove ring gear (2)
from case (1).
4. Remove pinion shaft (1).
5. Remove pinion gear (2) and thrust washers (1).
PM
T355 MANUAL TRANSAXLE
21 - 67
6. Remove side gears (1) and thrust washers.
ASSEMBLY
1. Install side gears (1) and thrust washers (2) into
case through opening and rotating into position.
21 - 68
T355 MANUAL TRANSAXLE
PM
2. Install pinion gears (2) and thrust washers (1) into
case through opening and rotating into position.
3. Install pinion shaft (1).
4. If previously removed, install ring gear to differential
case (1).
PM
T355 MANUAL TRANSAXLE
21 - 69
5. Install pinion shaft retainer (1).
6. Install NEW ring gear-to-case bolts (2) and torque
to 81 N·m (60 ft. lbs.) torque.
7. Using an arbor press (1), Handle C-4171(3), and
Installer L-4410 (4), install differential side bearings
to ring gear side.
21 - 70
T355 MANUAL TRANSAXLE
PM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст