Dodge Caliber. Manual — part 1071
ELEMENT-AIR CLEANER
REMOVAL
1. Turn Lock Retainers (5) and remove fresh air inlet
(2) from air cleaner housing (1).
2. Disconnect intake air temperature sensor connector
(4).
3. Remove Air inlet tube (5) from air cleaner housing
(1).
4. Unfasten clasps (2) on sides of air cleaner housing
cover (1).
PM
ENGINE 2.0L WORLD
9 - 1571
5. Pull air cleaner cover (1) aside.
6. Remove filter element (3).
7. If necessary, clean the inside of the air cleaner
housing (2).
INSTALLATION
1. Install new filter element.
2. Place cover over air cleaner housing. Snap clasps
(2) in place.
3. Install air inlet tube (5).
4. Connect intake air temperature sensor connector
(4).
9 - 1572
ENGINE 2.0L WORLD
PM
5. Install fresh air inlet (2) on air cleaner housing (1)
and lock retainers (5).
PM
ENGINE 2.0L WORLD
9 - 1573
HOUSING-AIR CLEANER
REMOVAL
1. Remove fresh air inlet (2) from air cleaner housing
(1).
2. Remove intake air temperature sensor electrical
connector (4).
3. Remove air inlet tube (5) from housing (1).
4. Pull housing (1) upward to remove.
9 - 1574
ENGINE 2.0L WORLD
PM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст