Dodge Caliber. Manual — part 1098
ENGINE LIFT FIXTURE 9704
FRONT SEAL INSTALLER 9506
HOLDING FIXTURE 9707
LOCKING WEDGE 9701
REAR CRANKSHAFT SEAL GUIDE 9509
PM
ENGINE 2.4L WORLD
9 - 1679
REAR MAIN SEAL DRIVER 9706
TENSIONER PIN 9703
9 - 1680
ENGINE 2.4L WORLD
PM
ELEMENT-AIR CLEANER
REMOVAL
1. Turn Lock Retainers (5) and remove fresh air inlet
(2) from air cleaner housing (1).
2. Disconnect intake air temperature sensor connector
(4).
3. Remove Air inlet tube (5) from air cleaner housing
(1).
4. Unfasten clasps (2) on sides of air cleaner housing
cover (1).
PM
ENGINE 2.4L WORLD
9 - 1681
5. Pull air cleaner cover (1) aside.
6. Remove filter element (3).
7. If necessary, clean the inside of the air cleaner
housing (2).
INSTALLATION
1. Install new filter element.
2. Place cover over air cleaner housing. Snap clasps
(2) in place.
3. Install air inlet tube (5).
4. Connect intake air temperature sensor connector
(4).
9 - 1682
ENGINE 2.4L WORLD
PM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст