Dodge Durango (DN). Manual — part 466
VIN DECODING INFORMATION
POSITION
INTERPRETATION
CODE = DESCRIPTION
1
Country of Origin
1= USA
2
Make
B = Dodge
3
Vehicle Type
4 = Multipurpose Passenger Vehicle
4
Gross Vehicle Weight Rating
H = 6001-7000 lbs.
5
Vehicle Line
R = Durango 4x2
S = Durango 4x4
6
Series
2 = Durango
7
Body Style
8 = Sport Utility 4 Door
8
Engine
N=4.7L
Y=5.2L
Z=5.9L
9
Check Digit
10
Model Year
Y=2000
11
Assembly Plant
F = Newark Assembly
12 Thru 17
Vehicle Build Sequence
Assembly Sequence
VEHICLE SAFETY CERTIFICATION LABEL
A vehicle safety certification label (Fig. 2) is
attached to every DaimlerChrysler Corporation vehi-
cle. The label certifies that the vehicle conforms to all
applicable Federal Motor Vehicle Safety Standards.
The label also lists:
• Month and year of vehicle manufacture.
• Gross Vehicle Weight Rating (GVWR). The gross
front and rear axle weight ratings (GAWR’s) are
based on a minimum rim size and maximum cold tire
inflation pressure.
• Vehicle Identification Number (VIN).
• Type of vehicle.
• Type of rear wheels.
• Bar code.
• Month, Day and Hour (MDH) of final assembly.
• Paint and Trim codes.
• Country of origin.
The label is located on the driver-side door shut-
face.
INTERNATIONAL SYMBOLS
DESCRIPTION
The graphic symbols illustrated in the following
International Control and Display Symbols Chart are
used to identify various instrument controls. The
symbols correspond to the controls and displays that
are located on the instrument panel.
Fig. 2 Vehicle Safety Certification Label—Typical
2
INTRODUCTION
DN
DESCRIPTION AND OPERATION (Continued)
FASTENER IDENTIFICATION
DESCRIPTION
GRADE/CLASS IDENTIFICATION
The SAE bolt strength grades range from grade 2
to grade 8. The higher the grade number, the greater
the bolt strength. Identification is determined by the
line marks on the top of each bolt head. The actual
bolt strength grade corresponds to the number of line
marks plus 2. The most commonly used metric bolt
strength classes are 9.8 and 10.9. The metric
strength class identification number is imprinted on
the head of the bolt. The higher the class number,
the greater the bolt strength. Some metric nuts are
imprinted with a single-digit strength class on the
nut face. Refer to the Fastener Identification and
Fastener Strength Charts.
1
High Beam
13
Rear Window Washer
2
Fog Lamps
14
Fuel
3
Headlamp, Parking Lamps, Panel Lamps
15
Engine Coolant Temperature
4
Turn Warning
16
Battery Charging Condition
5
Hazard Warning
17
Engine Oil
6
Windshield Washer
18
Seat Belt
7
Windshield Wiper
19
Brake Failure
8
Windshield Wiper and Washer
20
Parking Brake
9
Windscreen Demisting and Defrosting
21
Front Hood
10
Ventilating Fan
22
Rear hood (Decklid)
11
Rear Window Defogger
23
Horn
12
Rear Window Wiper
24
Lighter
DN
INTRODUCTION
3
DESCRIPTION AND OPERATION (Continued)
FASTENER IDENTIFICATION
4
INTRODUCTION
DN
DESCRIPTION AND OPERATION (Continued)
FASTENER STRENGTH
DN
INTRODUCTION
5
DESCRIPTION AND OPERATION (Continued)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст