Lincoln Continental (2020 year). Manual in english — page 8

Blind Spot Information and Cross Traffic Alert System

Action

Message

A fault with the system has occurred. Contact an authorized dealer as soon as possible.

Blindspot System Fault

The system sensors are blocked. Contact an authorized dealer as soon as possible. See Blind

Spot Information System (page 257).

Blindspot Not Available Sensor Blocked

See Manual

The system detects a vehicle. See Blind Spot Information System (page 257).

Vehicle Coming From X

The blind spot information system and cross traffic alert system sensors are blocked. See Blind

Spot Information System (page 257).

Cross Traffic Not Available Sensor Blocked

See Manual

A fault with the system has occurred. Contact an authorized dealer as soon as possible.

Cross Traffic System Fault

Doors and Locks

Action

Message

The door listed is not completely closed.

X Door Ajar

The driver’s door is opened, your vehicle is in park and the engine is on.

Engine ON

Displays when the hood is not completely closed.

Hood Ajar

Displays when the door switches have been disabled.

Switches Inhibited Security Mode

There is a system malfunction with the child locks. Contact an authorized dealer as soon as

possible.

Child Lock Malfunction Service Required

131

Information Displays

Action

Message

Indicates that the rear seat interior door release switches and power windows are switched off,

preventing rear seat occupants from opening the doors or windows.

Child Lock ON

Indicates that the rear seat interior door release switches and power windows are switched on.

Child Lock OFF

Displays when the door lock turns off.

Door Unlocked

Displays when the door lock is turned on and you attempt to open the door.

Doors Locked Unlock Before Opening

Indicates a driver door fault that requires manually opening the door by the override lever.

Contact an authorized dealer.

Driver Door Fault Use Inside Override

Lever In Map Pocket

Indicates a fault with the electronic door system. Contact an authorized dealer.

Door Fault Service Required

Displays the factory keypad code after the keypad has been reset. See Keyless Entry (page

83).

Factory Keypad Code {X X X X X}

Driver Alert

Action

Message

Stop and rest as soon as it is safe to do so.

Driver Alert Warning Rest Now

Take a rest soon.

Driver Alert Warning Rest Suggested

132

Information Displays

Fuel

Action

Message

An early reminder of a low fuel condition.

Fuel Level Low

The fuel fill inlet may not be properly closed.

Check Fuel Fill Inlet

Hill Start Assist

Action

Message

Displays when hill start assist is not available. Contact your authorized dealer. See Hill Start

Assist (page 215).

Hill Start Assist Not Available

Keys and Intelligent Access

Action

Message

A reminder to press the brake while starting your vehicle.

To START Press Brake

The system does not detect the key. See Keyless Starting (page 180).

No Key Detected

The Start Stop button is pressed to shut off the engine and an Intelligent Access key is not

detected inside your vehicle.

Restart Now or Key is Needed

Your vehicle is in the accessory ignition state.

Full Accessory Power Active

133

Information Displays

Action

Message

There is a problem with your vehicle’s starting system. See an authorized dealer for service.

Starting System Fault

During spare key programming, an intelligent access key is programmed to the system.

Key Program Successful

During spare key programming, the maximum number of keys have been programmed.

Max Number of Keys Learned

Displayed during spare key programming, when an intelligent access key has failed to be

programmed.

Key Program Failure

Displayed during spare key programming when not enough keys have been programmed.

Not Enough Keys Learned

Displays when the key battery is low. Change the battery as soon as possible.

Key Battery Low Replace Soon

Displays when the vehicle is switched off.

Vehicle Switched Off

134

Information Displays

Lane Keeping System

Action

Message

The system has malfunctioned. Contact an authorized dealer as soon as possible.

Lane Keeping Sys. Malfunction Service

Required

The system has detected a condition that has caused the system to be temporarily unavailable.

Front Camera Temporarily Not Available

The system has detected a condition that requires the windshield to be cleaned to operate

properly.

Front Camera Low Visibility Clean Screen

The system has malfunctioned. Contact an authorized dealer as soon as possible.

Front Camera Malfunction Service

Required

The system requests the driver to keep their hands on the steering wheel.

Keep Hands on Steering Wheel

Maintenance

Action

Message

Stop your vehicle as soon as safely possible, turn off the engine. Check the oil level. If the warning

stays on or continues to come on with your engine running, contact an authorized dealer as

soon as possible.

Low Engine Oil Pressure

The engine oil life remaining is 10% or less.

Change Engine Oil Soon

The oil life left reaches 0%.

Oil Change Required

135

Information Displays

Action

Message

The brake fluid level is low and the brake system should be inspected immediately. See Brake

Fluid Check (page 333).

Brake Fluid Level Low

The brake system needs servicing. Stop the vehicle in a safe place. Contact an authorized dealer.

Check Brake System

The engine coolant temperature is excessively high.

Engine Coolant Over Temperature

The washer fluid is low and needs to be refilled.

Washer Fluid Level Low

Indicates that your vehicle is still in Transport mode. This may not allow some features to operate

properly. Contact an authorized dealer.

Transport Mode Contact Dealer

Indicates that your vehicle is still in Factory mode. This may not allow some features to operate

properly. Contact an authorized dealer.

Factory Mode Contact Dealer

Informs the driver that the powertrain needs service due to a powertrain malfunction.

See Manual

The engine has reduced power to help reduce high engine temperature.

Power Reduced to Lower Engine Temp

The brake system has reduced stopping power.

Brake Applied Power Reduced

136

Information Displays

MyKey

Action

Message

MyKey cannot be programmed during key programming.

MyKey not Created

When starting your vehicle, a MyKey is in use and the MyKey speed limit is on.

Speed Limited to XX MPH/km/h

When a MyKey is in use, the MyKey speed limit is on and your vehicle speed is approaching

81 mph (130 km/h).

Near Vehicle Top Speed

Displays when MyKey is active.

MyKey Active Drive Safely

Displays when MyKey is active.

Check Speed Drive Safely

Displays when a MyKey is in use and the MyKey speed limit is reached.

Vehicle at Top Speed of MyKey Setting

Displays when a MyKey is in use and seatbelt reminder is activated.

Buckle Up to Unmute Audio

Displays when a MyKey is in use and AdvanceTrac is activated.

AdvanceTrac On - MyKey Setting

Displays when a MyKey is in use and park aid is activated.

MyKey Park Aid Cannot be Deactivated

Displayed when the lane keeping aid is on per MyKey settings.

Lane Keeping Alert On MyKey Setting

137

Information Displays

Park Aid

Action

Message

The system has detected a condition that requires service. Contact your authorized dealer. See

Front Parking Aid (page 223).

Check Front Park Aid

The system has detected a condition that requires service. Contact your authorized dealer. See

Rear Parking Aid (page 221).

Check Rear Park Aid

Park Brake

Action

Message

The parking brake is set, the engine is running and you drive your vehicle more than 3 mph

(5 km/h). If the warning stays on after the parking brake is released, contact an authorized dealer

as soon as possible.

Park Brake Engaged

The electric parking brake is set and a manual release is attempted without the brake pedal

being pressed.

To Release: Press Brake and Switch

The electric parking brake is set and an automatic release is attempted but cannot be performed.

Perform a manual release.

Park Brake Use Switch to Release

The electric parking brake is set and your vehicle speed exceeds 3 mph (5 km/h). Release park

brake before continued driving.

Release Park Brake

The electric parking brake is not fully applied.

Park Brake Not Applied

138

Information Displays

Action

Message

The electric parking brake is not fully released.

Park Brake Not Released

The electric parking brake system has been put into a special mode that is used to allow service

of the rear brakes. Contact an authorized dealer.

Park Brake Maintenance Mode

The electric park brake system has detected a condition that requires service. Some functionality

may still be available. Contact your authorized dealer.

Park Brake Limited Function Service

Required

The electric parking brake system has detected a condition that requires service. Contact your

authorized dealer.

Park Brake Malfunction Service Now

Numerous park brake applies have overheated the system. Wait 2 minutes before attempting

to apply again.

Park Brake System Overheated

Power Steering

Action

Message

The power steering system has detected a condition that requires service. See an authorized

dealer.

Steering Fault Service Now

The power steering system has detected a condition within the power steering system or passive

entry or passive start system requires service. Contact an authorized dealer.

Steering Assist Fault Service Required

The power steering system is not working. Stop the vehicle in a safe place. Contact your

authorized dealer.

Steering Loss Stop Safely

139

Information Displays

Pre-Collision Assist

Action

Message

You have a blocked sensor due to bad weather, ice, mud or water in front of the radar sensor.
You can typically clean the sensor to resolve.

Pre-Collision Assist Not Available Sensor

Blocked

A fault with the system has occurred. Contact an authorized dealer as soon as possible.

Pre-Collision Assist Not Available

Remote Start

Action

Message

Displays as a reminder to apply the brake and push the gear shift button to drive the vehicle

after a remote start.

To Drive: Press Brake and Gear Shift

Button

Seats

Action

Message

Displays as a reminder that memory seats are not available while driving.

Memory Recall Not Permitted While Driving

Displays to show where your memory setting has been saved.

Memory {0} Saved

140

Information Displays

Stability Control

Action

Message

Displayed when the system has detected a condition that requires service. Contact your

authorized dealer as soon as possible.

Service AdvanceTrac

The traction control has been disabled or enabled by the driver.

AdvanceTrac Off On

Starting System

Action

Message

Displays when starting the vehicle as a reminder to apply the brake.

To START Press Brake

Displays when the starter has exceeded its cranking time in attempting to start the vehicle.

Cranking Time Exceeded

Displays when the starter is attempting to start the vehicle.

Engine Start Pending Please Wait

Displays when the pending start has been cancelled.

Pending Start Cancelled

141

Information Displays

Tire Pressure Monitoring System

Action

Message

One or more tires on your vehicle have low tire pressure. See Tire Pressure Monitoring System

(page 367).

Tire Pressure Low

The tire pressure monitoring system is malfunctioning. If the warning stays on or continues to

come on, contact an authorized dealer. See Tire Pressure Monitoring System (page 367).

Tire Pressure Monitor Fault

A tire pressure sensor is malfunctioning, or your spare tire is in use. For more information on

how the system operates under these conditions, See Tire Pressure Monitoring System (page
367). If the warning stays on or continues to come on, contact an authorized dealer as soon as

possible.

Tire Pressure Sensor Fault

Transmission

Action

Message

You switched the engine off and shift select lever is in any position other than park (P).

Shift to Park

Transmission is too cold. Wait for it to warm up before you drive.

Transmission Warming Up Please Wait

Displays when the brake pedal needs to be depressed.

Press Brake Pedal

The transmission is overheating and needs to cool. Stop in a safe place as soon as it’s possible.

Transmission Over Temperature Stop

Safely

See an authorized dealer.

Transmission Service Required

142

Information Displays

Action

Message

The transmission is overheating and needs to cool. Stop in a safe place as soon as it’s possible.

Transmission Too Hot Press Brake

The transmission has limited functionality. See an authorized dealer.

Transmission Limited Function See Manual

A reminder to shift into park. In addition, this message is typical after reconnecting or recharging

the battery until you cycle the ignition to the on mode. See Changing the 12V Battery (page

334).

Transmission Not in Park

Displays when there is a system fault and the park brake needs to be depressed before exiting

the vehicle. See your authorized dealer.

SHIFT SYS FAULT Confirm Park Brake

Apply Before Exiting the Vehicle

See your authorized dealer.

SHIFT SYS FAULT Service Required

Displays when there is a system fault while the vehicle is shifting to park. See your authorized

dealer.

SHIFT SYS FAULT Vehicle is Shifting to

Park

Displays when there is a system fault while the vehicle is shifting to reverse. See your authorized

dealer.

SHIFT SYS FAULT Reverse Unavailable

Service Required

See an authorized dealer.

SHIFT SYS FAULT Drive Unavailable Select

S for Drive Service Required

See your authorized dealer.

SHIFT SYS FAULT Neutral Unavailable

Service Required

See your authorized dealer.

SHIFT SYS FAULT Sport Unavailable

Service Required

Displays when an invalid gear has been selected.

Invalid Gear Selection

143

Information Displays

Action

Message

Displays when the brake pedal needs to be depressed to enable the transmission to shift from

park.

Depress Brake to Shift from Park

Displays when neutral hold is active. See Automatic Transmission (page 197).

Stay in Neutral Mode Engaged

Displays when the neutral button N needs to be pressed again to enter neutral hold. See Auto-

matic Transmission (page 197).

To Stay in Neutral When Exiting Vehicle

Select N Again

HEAD UP DISPLAY

(IF EQUIPPED)

Head Up Display (HUD)

This is a visual system that shows information
in your field of view as you drive. The
information comes from various vehicle
systems and includes vehicle speed, speed
limit, navigation, and advanced driver
assistance systems (ADAS), such as adaptive
cruise control (ACC) and the lane keeping
system. This system projects the information
off the windshield, and focuses the image

near the end of the hood approximately 7 ft
(2 m) in front of the driver. Viewing this
information does not require you to
significantly move your head, allowing you
to keep your eyes on the road while having
quick and easy access to information.

Head Up Display Information

E228521

Signaling and Traffic Indication.

A

Left Information Group.

B

ADAS Display Area.

C

144

Information Displays

Navigation Display Area.

D

Status Bar.

E

Speedometer Display Area.

F

Signaling and Traffic Indication

Displays direction indicators, blind spot
information (if direction indicators are active)
and cross traffic alert.

Left Information Group

Displays incoming call information.

ADAS Display Area

Displays ACC and lane keeping system
status and warnings.

Navigation Display Area

Displays navigation next turn instructions.

Status Bar

Displays distance to empty (DTE), time and
outside air temperature. Next to DTE, the
fuel gauge fill color changes to yellow in low
fuel conditions. You can switch off the status
bar in the HUD settings menu.

Speedometer Display Area

Displays current vehicle speed, speed limit
(if available in the map database) and your
transmission gear selection.

Configuring The Head Up Display

You can control the system's options through
the information display by using the HUD,
OK and arrow buttons on the right-hand side
of your steering wheel. See General
Information (page 117). You can adjust the
display according to your height to make
viewing the content easier. You can also
adjust what content displays and the
brightness of the content. The system's
options appear in the instrument cluster
while the updates happen in the HUD.

Note: If HUD On is unchecked, other options
of the system are hidden.

Note: The HUD menu automatically closes
after a certain period of inactivity.

Note: The HUD image brightness
automatically adjusts to the brightness of
the ambient environment. You have the
ability to adjust the brightness further
according to your preference.

Note: In some instances, sunlight can cause
some reflections in and around the HUD
image.

145

Information Displays

Head-Up Display (HUD)

Turns the HUD on and off.

HUD On

Follow onscreen directions to confirm or modify your settings.

Brightness

Follow onscreen directions to confirm or
modify your settings.

Vertical Position

HUD Adjustments

Image Rotation

Turns the distance to empty, time and temperature on and off.

HUD Content

Select Your Setting

Cruise and Lane Control

Note: When you save a memory preset position, your current HUD settings are also saved to that memory preset position. See Memory
Function (page 165).

146

Information Displays