Dodge Neon / Neon SRT-4. Manual — part 232
SPECIAL TOOLS
2.0L SOHC ENGINE
Puller 1026
Crankshaft Damper Removal Insert 6827A
Camshaft Sprocket Remover/Installer C-4687
Camshaft Sprocket Remover/Installer Adapter
C-4687-1
Camshaft Seal Remover C-4679-A
Camshaft Seal Installer MD-998306
Crankshaft Damper/Sprocket Installer 6792
Valve Spring Compressor MD-998772-A
Spring Compressor Adapter 6779
Valve Spring Compressor C-3422-D
9 - 22
ENGINE 2.0L SOHC
PL/SRT-4
ENGINE 2.0L SOHC (Continued)
Spring Compressor Adapter 6526
Cylinder Bore Indicator C-119
Front Crankshaft Seal Remover 6771
Front Crankshaft Seal Installer 6780
Crankshaft Sprocket Remover 6793
Crankshaft Sprocket Remover Insert C-4685-C2
Rear Crankshaft Seal Guide and Installer 6926-1 and
6926-2
Driver Handle C-4171
Connecting Rod Guides 8189
PL/SRT-4
ENGINE 2.0L SOHC
9 - 23
ENGINE 2.0L SOHC (Continued)
Dolly 6135
Cradle 6710
Post Kit Engine Cradle 6848
Clutch Line Disconnect 6638A
Pressure Gauge C-3292
Adapter 8406
Dial Indicator C-3339
Valve Spring Tester C-647
9 - 24
ENGINE 2.0L SOHC
PL/SRT-4
ENGINE 2.0L SOHC (Continued)
AIR CLEANER ELEMENT
REMOVAL
(1) Unlatch 2 clips and rotate the lid upward and
off of the air cleaner box (Fig. 10).
(2) Remove the air filter element (Fig. 10).
INSTALLATION
(1) Install the air filter element on locator (Fig. 11)
and then make sure that the element is locked in at
the lip in the air cleaner box (Fig. 11).
(2) Install the air cleaner housing lid.
(3) Clip the 2 latches for the air cleaner housing
lid (Fig. 11).
DRB III
T
with PEP Module – OT-CH6010A
Cylinder Compression Pressure Adaptor 8116
Pressure Transducer CH7059
Fig. 10 Air Cleaner Element
1 - Lip for Element
Fig. 11 Element Locator
1 - Element Locator
PL/SRT-4
ENGINE 2.0L SOHC
9 - 25
ENGINE 2.0L SOHC (Continued)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст