Dodge Neon / Neon SRT-4. Manual — part 2
CONVERSION FORMULAS AND EQUIVALENT VALUES
MULTIPLY
BY
TO GET
MULTIPLY
BY
TO GET
in-lbs
x 0.11298
= Newton Meters
(N·m)
N·m
x 8.851
= in-lbs
ft-lbs
x 1.3558
= Newton Meters
(N·m)
N·m
x 0.7376
= ft-lbs
Inches Hg (60° F)
x 3.377
= Kilopascals (kPa)
kPa
x 0.2961
= Inches Hg
psi
x 6.895
= Kilopascals (kPa)
kPa
x 0.145
= psi
Inches
x 25.4
= Millimeters (mm)
mm
x 0.03937
= Inches
Feet
x 0.3048
= Meters (M)
M
x 3.281
= Feet
Yards
x 0.9144
= Meters
M
x 1.0936
= Yards
mph
x 1.6093
= Kilometers/Hr.
(Km/h)
Km/h
x 0.6214
= mph
Feet/Sec
x 0.3048
= Meters/Sec (M/S)
M/S
x 3.281
= Feet/Sec
mph
x 0.4470
= Meters/Sec (M/S)
M/S
x 2.237
= mph
Kilometers/Hr. (Km/h)
x 0.27778
= Meters/Sec (M/S)
M/S
x 3.600
Kilometers/Hr. (Km/h)
COMMON METRIC EQUIVALENTS
1 inch = 25 Millimeters
1 Cubic Inch = 16 Cubic Centimeters
1 Foot = 0.3 Meter
1 Cubic Foot = 0.03 Cubic Meter
1 Yard = 0.9 Meter
1 Cubic Yard = 0.8 Cubic Meter
1 Mile = 1.6 Kilometers
Refer to the Metric Conversion Chart to convert
torque values listed in metric Newton- meters (N·m).
Also, use the chart to convert between millimeters
(mm) and inches (in.).
6
INTRODUCTION
PL/SRT-4
METRIC SYSTEM (Continued)
TORQUE REFERENCES
DESCRIPTION
Individual Torque Charts appear within many or
the Groups. Refer to the Standard Torque Specifica-
tions Chart for torque references not listed in the
individual torque charts.
TORQUE SPECIFICATIONS
PL/SRT-4
INTRODUCTION
7
VEHICLE IDENTIFICATION
NUMBER
DESCRIPTION
The Vehicle Identification Number (VIN) can be
viewed through the windshield at the upper left cor-
ner of the instrument panel next to the A-pillar (Fig.
2) or (Fig. 3). The VIN consists of 17 characters in a
combination of letters and numbers that provide spe-
cific information about the vehicle. Refer to the VIN
Decoding Information Table to interpret VIN code.
VIN CHECK DIGIT
To protect the consumer from theft and possible
fraud the manufacturer is required to include a check
digit at the ninth position of the VIN. The check digit
is used by the manufacturer and government agen-
cies to verify the authenticity of the vehicle and offi-
cial documentation. The formula to use the check
digit is not released to the general public.
VIN DECODING INFORMATION
POSITION
INTERPRETATION
CODE = DESCRIPTION
1
Country of origin
1 = Manufactured By DaimlerChrysler Corporation
2
Make
B = Dodge
C = Chrysler
3
Vehicle Type
3 = Passenger Car
4
Passenger Safety
A = Restraint System, Active Front and Side Airbags
B = Restraint System, Manual/Active Uni-Belt
E = Restraint System, Active Driver and Passenger
Airbags
5
Car Line
S = Neon LHD
V = Neon RHD
Fig. 2 VIN LOCATION - LHD
1 - INSTRUMENT PANEL
2 - A-PILLAR
3 - VIN LOCATION
Fig. 3 VIN LOCATION - RHD
1 - INSTRUMENT PANEL
2 - A-PILLAR
3 - VIN LOCATION
8
INTRODUCTION
PL/SRT-4
POSITION
INTERPRETATION
CODE = DESCRIPTION
6
Series
1 = Economy
2 = Low Line
4 = High Line
5 = Premium
6 = Sport
7 = Special
7
Body Style
6 = 4 Door Sedan
8
Engine
C = 2.0 L 4 Cyl. 16V SOHC Gasoline
S = 2.4 L 4 Cyl. 16V DOHC High Output Turbo
9
Check Digit
See explanation in this section.
10
Model Year
5 = 2005
11
Assembly Plant
D = Belvedere Assembly
12 Thorough 17
Build Sequence
6 Digit number assigned by assembly plant
VEHICLE CERTIFICATN LABEL
DESCRIPTION
A vehicle certification label is attached to the rear
shutface of the driver’s door (Fig. 4). This label indi-
cates date of manufacture (month and year), Gross
Vehicle Weight Rating (GVWR), Gross Axle Weight
Rating (GAWR) front, Gross Axle Weight Rating
(GAWR) rear and the Vehicle Identification Number
(VIN). The Month, Day and Hour of manufacture is
also included.
All communications or inquiries regarding the
vehicle should include the Month-Day-Hour and
Vehicle Identification Number.
E-MARK LABEL
DESCRIPTION
An E-mark Label (Fig. 5) is located on the rear
shut face of the driver’s door. The label contains the
following information:
• Date of Manufacture
• Month-Day-Hour (MDH)
• Vehicle Identification Number (VIN)
• Country Codes
• Regulation Number
• Regulation Amendment Number
• Approval Number
Fig. 4 VEHICLE CERTIFICATION LABEL - TYPICAL
Fig. 5 E-MARK LABEL
1 - COUNTRY CODE
2 - REGULATION NUMBER
3 - APPROVAL NUMBER
4 - AMENDMENT NUMBER
PL/SRT-4
INTRODUCTION
9
VEHICLE IDENTIFICATION NUMBER (Continued)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст