Dodge Dakota (R1). Manual — part 22
Symptom List:
AM SECTION
CASS ERROR
CASSETTE COMMUNICATION FAULT
CASSETTE EJECT FAILURE
CASSETTE LOADING FAILURE
CASSETTE TAPE TENSION HIGH
CASSETTE TAPE TENSION LOW
CD ERROR
CD MECHANICAL FAILURE
FM SECTION
MICRO OUTPUT FAILURE
RADIO ERROR
*AM/FM SWITCH INOPERATIVE
*ANY STATION PRESET SWITCH INOPERATIVE
*BALANCE INOPERATIVE
*CD EJECT SWITCH INOPERATIVE
*EQUALIZER INOPERATIVE
*FADER INOPERATIVE
*FF/RW SWITCH INOPERATIVE
*HOUR/MINUTE SWITCHES INOPERATIVE
*PAUSE/PLAY SWITCH INOPERATIVE
*PWR SWITCH INOPERATIVE
*SCAN SWITCH INOPERATIVE
*SEEK SWITCH INOPERATIVE
*SET SWITCH INOPERATIVE
*TAPE EJECT SWITCH INOPERATIVE
*TIME SWITCH INOPERATIVE
*TUNE SWITCH INOPERATIVE
Test Note:
All symptoms listed above are diagnosed using the same tests.
The title for the tests will be AM SECTION.
When Monitored and Set Condition:
AM SECTION
When Monitored:
Continuously with the ignition and radio turned on.
Set Condition:
The code will set if the radio detects a AM Section failure.
CASS ERROR
When Monitored:
Continuously with the ignition and radio turned on.
Set Condition:
The code will set if the radio detects a internal cassette failure.
85
AUDIO
CASSETTE COMMUNICATION FAULT
When Monitored:
Continuously with the ignition and radio turned on.
Set Condition:
The code will set if the radio detects a cassette com failure.
CASSETTE EJECT FAILURE
When Monitored:
Continuously with the ignition and radio turned on.
Set Condition:
The code will set if the radio detects a cassette eject failure.
CASSETTE LOADING FAILURE
When Monitored:
Continuously with the ignition and radio turned on.
Set Condition:
The code will set if the radio detects a cassette loading failure.
CASSETTE TAPE TENSION HIGH
When Monitored:
Continuously with the ignition and radio turned on.
Set Condition:
The code will set if the radio detects a internal cassette failure.
CASSETTE TAPE TENSION LOW
When Monitored:
Continuously with the ignition and radio turned on.
Set Condition:
The code will set if the radio detects a internal cassette failure.
CD ERROR
When Monitored:
Continuously with the ignition and radio turned on.
Set Condition:
The code will set if the radio detects a internal CD failure.
CD MECHANICAL FAILURE
When Monitored:
Continuously with the ignition and CD player turned on.
Set Condition:
The code will set if the radio detects a CD mechanical failure.
FM SECTION
When Monitored:
Continuously with the ignition and radio turned on.
Set Condition:
The code will set if the radio detects a FM Section failure.
RADIO ERROR
When Monitored:
Continuously with the ignition and radio turned on.
Set Condition:
The code will set if the radio detects a internal radio failure.
POSSIBLE CAUSES
INTERNAL FAILURE
86
AUDIO
AM SECTION —
Continued
TEST
ACTION
APPLICABILITY
1
NOTE: If a DTC is set, erase the DTC and attempt to reset the DTC. If DTC
resets, follow this test.
This is an internal radio failure.
View repair
All
Repair
Replace the Radio.
Perform BODY VERIFICATION TEST - VER 1.
87
AUDIO
AM SECTION —
Continued
Symptom List:
CD PLAY FAILURE
CD READ FAILURE
IMPROPER DISK IN CD
Test Note:
All symptoms listed above are diagnosed using the same tests.
The title for the tests will be CD PLAY FAILURE.
When Monitored and Set Condition:
CD PLAY FAILURE
When Monitored:
Continuously with the ignition and the radio CD player turned on.
Set Condition:
If the CD is scratched, dirty, so that the head cannot play the disk, the
code will set.
CD READ FAILURE
When Monitored:
Continuously with the ignition and the radio CD player turned on.
Set Condition:
The code will set if a CD that is not formatted as a music CD is installed
in the radio CD player.
IMPROPER DISK IN CD
When Monitored:
Continuously with the ignition and the radio CD player turned on.
Set Condition:
The code will set if a CD that is not formatted as a music CD is installed
in the radio CD player.
POSSIBLE CAUSES
CD PLAY, READ OR IMPROPER DISK FAILURE
TEST
ACTION
APPLICABILITY
1
Replace the problem CD with a good, clean, unscratched, music CD.
Turn the radio CD player on.
With the DRBIII
t, read DTC’s.
Does the DRBIII
t display CD PLAY FAILURE, CD READ FAILURE, or IMPROPER
DISK IN CD?
All
Yes
→
Replace the Radio.
Perform BODY VERIFICATION TEST - VER 1.
No
→
Test Complete.
88
AUDIO
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст