Dodge Nitro. Manual — part 957
Fig. 26: Exploded View Of MP143
Courtesy of CHRYSLER LLC
1 - INPUT SHAFT SEAL
16 - SHIFT MOTOR
2 - FRONT CASE
17 - DRAIN/FILL PLUGS
3 - MAINSHAFT
18- DRIVE CHAIN
4 - MODE SLEEVE
19 - SHIFT LEVER PAD
5 - MODE HUB
20 - MODE FORK ASSEMBLY
6 - DRIVE SPROCKET
21- RETAINING CLIP
7 - RETAINING RING
22 - RETAINING RING
8 - THRUST WASHER
23 - DRIVE GEAR
9 - RETAINING RING
24 - SHIFT LEVER RETURN SPRING
10 - REAR CASE
25 - RETAINING RING
11 - OUTPUT SHAFT SEAL
26 - POCKET MAGNET
12 - DAMPENER
27 - DOWEL PIN
13 - OUTPUT FLANGE
28 - CHAIN GUIDE RAILS
14 - OUTPUT FLANGE NUT
29 - FRONT OUTPUT SHAFT SEAL
15 - ID TAG
30 - FRONT OUTPUT SHAFT FLANGE
2007 Dodge Nitro R/T
2007 TRANSFER CASE MP143 - Service Information - Nitro
Fig. 27: Removing Input Shaft Bearing From Front Case With Handle C-4171 And Installer 8693A
Courtesy of CHRYSLER LLC
1. Remove the input shaft bearing from the front case (3) with Handle C-4171 (1) and Installer 8693A (2).
Fig. 28: Installing New Input Gear Bearing Into Front Case Using Installer 8152, Inverted, And
Handle C-4171
Courtesy of CHRYSLER LLC
2. Install the new input gear bearing into the front case (3) using Installer 8152(2), inverted, and Handle C-
4171 (1).
1 - HANDLE C-4171
2 - INSTALLER 8693A
3 - FRONT HOUSING
1 - INPUT GEAR BEARING
2 - FRONT CASE
2007 Dodge Nitro R/T
2007 TRANSFER CASE MP143 - Service Information - Nitro
Fig. 29: Using Installer 7829A And Handle C-4171 To Remove Front Output Shaft Bearing From
Front Case
Courtesy of CHRYSLER LLC
3. Using Installer 7829A (2) and Handle C-4171 (1), remove front output shaft bearing from the front case
(3).
Fig. 30: Using Installer 8152, Inverted, And Handle C-4171 To Seat Bearing In Front Case
Courtesy of CHRYSLER LLC
4. Start front output shaft bearing in the front case. Using Installer 8152 (2), inverted, and Handle C-4171
(1), seat the bearing in the front case (3).
1 - HANDLE C-4171
2 - INSTALLER 7829A
3 - FRONT HOUSING
1 - HANDLE C-4171
2 - INSTALLER 8152
3 - FRONT HOUSING
2007 Dodge Nitro R/T
2007 TRANSFER CASE MP143 - Service Information - Nitro
Fig. 31: Installing New Main Shaft Rear Bearing Into Rear Case Using Installer 8245, And Handle
C-4171
Courtesy of CHRYSLER LLC
5. Remove the main shaft rear bearing from the rear case using Installer 5066 and Handle C-4171.
6. Install the new main shaft rear bearing into the rear case (3) using Installer 8245 (2), and Handle C-4171
(1).
Fig. 32: Installing Front Output Shaft Assembly Into Front Case And Front Output Shaft Front
Bearing
Courtesy of CHRYSLER LLC
7. Install a new front output shaft seal with Installer 6560.
8. Install the front output shaft assembly (2) into the front case (1) and the front output shaft front bearing.
1 - HANDLE C-4171
2 - INSTALLER 8152
3 - REAR HOUSING
1 - FRONT HOUSING
2 - FRONT OUTPUT SHAFT
2007 Dodge Nitro R/T
2007 TRANSFER CASE MP143 - Service Information - Nitro
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст