Dodge Nitro. Manual — part 946
Fig. 34: Remove/Install Chain Guide Screws
Courtesy of CHRYSLER LLC
17. Install the screws (1) to hold both chain guide rail to the front case (2). Tighten the screws to 5-8 N.m
(44-71 in.lbs.).
1 - SCREWS
2 - FRONT CASE
2007 Dodge Nitro R/T
2007 TRANSFER CASE MP140 - Service Information - Nitro
Fig. 35: Removing/Installing Input Gear Thrust Washer
Courtesy of CHRYSLER LLC
18. Install the input gear thrust washer (1) onto the input gear (2).
1 - THRUST WASHER
2 - INPUT GEAR
2007 Dodge Nitro R/T
2007 TRANSFER CASE MP140 - Service Information - Nitro
Fig. 36: Removing/Installing Mainshaft & Differential Assembly
Courtesy of CHRYSLER LLC
19. Install the mainshaft and differential assembly (1) into the front case (2) and input gear.
1 - MAINSHAFT AND DIFFERENTIAL ASSEMBLY
2 - FRONT HOUSING
NOTE:
Be sure that the input spline is engaged with the differential assembly.
2007 Dodge Nitro R/T
2007 TRANSFER CASE MP140 - Service Information - Nitro
Fig. 37: Identifying Front Drive Sprocket, Mainshaft Drive Sprocket & Drive Chain
Courtesy of CHRYSLER LLC
20. Install the drive sprockets (1, 2) and drive chains (3) as one.
1 - FRONT DRIVE SPROCKET
2 - MAINSHAFT DRIVE SPROCKET
3 - DRIVE CHAIN
2007 Dodge Nitro R/T
2007 TRANSFER CASE MP140 - Service Information - Nitro
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст