Dodge Nitro. Manual — part 72
29. Disconnect the oxygen sensor, knock, EGR, injector and ignition coil harness connectors (1) and position
the wiring harness aside.
30. Disconnect the engine wiring harness from the transmission housing and remove the remaining
transmission housing bolts.
Fig. 24: Connecting Engine Lifting Bracket From Special Tool Kit 8534B To Right Rear Of
Cylinder Head Outer Most Bolt Access Hole
Courtesy of CHRYSLER LLC
3 - Coil
1 - LIFTING CHAIN
2 - ENGINE LIFTING BRACKET #8534
2007 Dodge Nitro R/T
2007 ENGINE 4.0L - Service Information - Nitro
31. Connect the engine lifting bracket (2) from special tool kit 8534B to the right rear of the cylinder head
outer most bolt access hole (5). See Fig. 24.
32. Install a bolt into the inner most bolt access hole (5) next to the engine lift bracket to assure lifting bracket
positioning.
3 - CAM POSITION SENSOR
4 - EGR VALVE
5 - BOLTS
6 - COOLANT PIPE
2007 Dodge Nitro R/T
2007 ENGINE 4.0L - Service Information - Nitro
Fig. 25: Connecting Engine Hoisting Chain To Left Timing Chain Cover Engine Lifting Point And
Engine Lift Bracket
Courtesy of CHRYSLER LLC
33. Connect a engine hoisting chain (1) to the left timing chain cover (2) engine lifting point and engine lift
bracket. See Fig. 25.
34. Carefully remove the engine from the engine bay area.
INSTALLATION
ENGINE ASSEMBLY-INSTALLATION
1 - LIFTING CHAIN
2 - UPPER TIMING CHAIN COVER
3 - POWER STEERING PUMP
4 - THERMOSTAT HOUSING
CAUTION: While slowly separating the engine from the vehicle, constant checks
must be made to assure proper positioning and that no damage to
other components or wiring harnesses occur during separation.
2007 Dodge Nitro R/T
2007 ENGINE 4.0L - Service Information - Nitro
Fig. 26: Connecting Engine Lifting Bracket From Special Tool Kit 8534B To Right Rear Of Cylinder
Head Outer Most Bolt Access Hole
Courtesy of CHRYSLER LLC
1. Install special tool #8534 B, engine lifting bracket (2) to the right rear of the cylinder head and install a
bolt into the inner most bolt hole (5) next to the bracket (5). See Fig. 26.
1 - LIFTING CHAIN
2 - ENGINE LIFTING BRACKET #8534
3 - CAM POSITION SENSOR
4 - EGR VALVE
5 - BOLTS
6 - COOLANT PIPE
2007 Dodge Nitro R/T
2007 ENGINE 4.0L - Service Information - Nitro
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст