Dodge Nitro. Manual — part 309
Fig. 13: Installing Subwoofer
Courtesy of CHRYSLER LLC
1. Connect the electrical connector and install the speaker.
2. Install the speaker mounting fasteners.
3. Install the speaker grille.
4. Connect the battery negative cable.
VIDEO SCREEN
REMOVAL
REMOVAL
Fig. 14: Removing Video Screen
Courtesy of CHRYSLER LLC
1. Disconnect and isolate the battery negative cable.
2007 Dodge Nitro R/T
2007 ACCESSORIES AND EQUIPMENT Audio/Video - Service Information - Nitro
2. Remove the video screen mounting fasteners.
3. Remove the video screen and disconnect the electrical connectors.
INSTALLATION
INSTALLATION
Fig. 15: Installing Video Screen
Courtesy of CHRYSLER LLC
1. Connect the electrical connectors and snap the video screen in position.
2. Install the video screen mounting fasteners.
3. Connect the battery negative cable.
2007 Dodge Nitro R/T
2007 ACCESSORIES AND EQUIPMENT Audio/Video - Service Information - Nitro
ASSEMBLY
AUTOMATIC TRANSMISSION - 42RLE
Fig. 18: 42RLE Bearing Orientation
Courtesy of CHRYSLER LLC
NOTE:
If the transmission assembly is being reconditioned (clutch/seal replacement)
or replaced, it is necessary to perform the TCM QUICK LEARN Procedure using
the scan tool.
1 - THRUST BEARING NO.1
5 - THRUST BEARING NO.5
2 - THRUST BEARING NO.2
6 - NEEDLE BEARING NO.6
3 - THRUST BEARING NO.3
7 - NEEDLE BEARING NO.7
4 - THRUST BEARING NO.4
-
2007 Dodge Nitro R/T
2007 AUTOMATIC TRANSMISSION 42RLE - Service Information - Nitro
2007 Dodge Nitro R/T
2007 AUTOMATIC TRANSMISSION 42RLE - Service Information - Nitro
Fig. 19: Bearing Cup Installation Special Tool - 5050A
Courtesy of CHRYSLER LLC
1. Install the output bearing cups using Installer 5050A. See Fig. 19
2007 Dodge Nitro R/T
2007 AUTOMATIC TRANSMISSION 42RLE - Service Information - Nitro
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст