Dodge Nitro. Manual — part 567
Fig. 130: Remover/Installer 9958
Courtesy of CHRYSLER LLC
Fig. 131: Adapters 9959
2007 Dodge Nitro R/T
2007 DRIVELINE Differential & Driveline - Nitro
Courtesy of CHRYSLER LLC
COVER-DIFFERENTIAL
REMOVAL
COVER-DIFFERENTIAL
Fig. 132: Identifying Differential Housing & Drain Plug
Courtesy of CHRYSLER LLC
1. With vehicle in neutral, position vehicle on hoist.
2. Remove skid plate.
2007 Dodge Nitro R/T
2007 DRIVELINE Differential & Driveline - Nitro
3. Remove drain plug (2) from housing (3) and drain fluid.
Fig. 133: Identifying Oil Filter Drain Tray & Vent Hose
Courtesy of CHRYSLER LLC
4. Remove oil filter drain tray (1) and vent hose from differential cover.
Fig. 134: Identifying Front Axle Bracket Cradle Nut & Front Axle Bracket Bolts
Courtesy of CHRYSLER LLC
5. Loosen front axle bracket bolt (1).
6. Remove front axle bracket bolts (2) from the axle and let bracket hang forward of the axle.
2007 Dodge Nitro R/T
2007 DRIVELINE Differential & Driveline - Nitro
7. Remove differential cover bolts and remove cover.
INSTALLATION
COVER-DIFFERENTIAL
Fig. 135: Applying Bead Of Mopar Axle RTV Sealant To Differential Cover
Courtesy of CHRYSLER LLC
1. Clean cover and mating surface.
2. Apply a bead of Mopar Axle RTV sealant (1) or equivalent to the differential cover (2).
CAUTION: If cover is not installed within 3 to 5 minutes, the cover must be
cleaned and new RTV applied. Failure to follow these instructions will
result in a leak.
2007 Dodge Nitro R/T
2007 DRIVELINE Differential & Driveline - Nitro
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст