Dodge Nitro. Manual — part 203
Turn the ignition on.
Measure the voltage between the (D65) CAN C Bus (+) circuit and ground.
Is there any voltage present?
Yes
Repair the (D65) CAN C Bus (+) circuit for a short to voltage.
Perform BODY VERIFICATION TEST - VER 1 .
No
Go to 12).
12) (D64) CAN C BUS (-) CIRCUIT SHORTED TO VOLTAGE
Fig. 62: Measuring Voltage Between (D64) CAN C Bus (-) Circuit And Ground
Courtesy of CHRYSLER LLC
Measure the voltage between the (D64) CAN C Bus (-) circuit and ground.
Is there any voltage present?
Yes
Repair the (D64) CAN C Bus (-) circuit for a short to voltage.
Perform BODY VERIFICATION TEST - VER 1 .
No
2007 Dodge Nitro R/T
2007 BRAKES ABS - Electrical Diagnostics - Nitro
Go to 13).
13) (D65) CAN C BUS (+) CIRCUIT SHORTED TO GROUND
Fig. 63: Measuring Resistance Between Ground And (D65) CAN C Bus (+) Circuit
Courtesy of CHRYSLER LLC
Turn the ignition off.
Measure the resistance between ground and the (D65) CAN C Bus (+) circuit.
Is any resistance present?
Yes
Repair the (D65) CAN C Bus (+) circuit for a short to ground.
Perform BODY VERIFICATION TEST - VER 1 .
No
Go to 14).
14) (D64) CAN C BUS (-) CIRCUIT SHORTED TO GROUND
2007 Dodge Nitro R/T
2007 BRAKES ABS - Electrical Diagnostics - Nitro
Fig. 64: Measuring Resistance Between Ground And (D64) CAN C Bus (-) Circuit
Courtesy of CHRYSLER LLC
Measure the resistance between ground and the (D64) CAN C Bus (-) circuit.
Is any resistance present?
Yes
Repair the (D64) CAN C Bus (-) circuit for a short to ground.
Perform BODY VERIFICATION TEST - VER 1 .
No
Go to 15).
15) (D65) CAN C BUS (+) CIRCUIT SHORTED TO (D64) CAN C BUS (-) CIRCUIT
2007 Dodge Nitro R/T
2007 BRAKES ABS - Electrical Diagnostics - Nitro
Fig. 65: Measuring Resistance Between (D65) CAN C Bus (+) Circuit And (D64) CAN C Bus (-)
Circuit
Courtesy of CHRYSLER LLC
Measure the resistance between the (D65) CAN C Bus (+) circuit and the (D64) CAN C Bus (-) circuit.
Is any resistance present?
Yes
Repair the (D65) CAN C Bus (+) circuit for a short to the (D64) CAN C Bus (-) circuit.
Perform BODY VERIFICATION TEST - VER 1 .
No
Inspect the wiring and connectors for damage or shorted circuits. If ok, replace and program the
Totally Integrated Power Module in accordance with the service information.
Perform BODY VERIFICATION TEST - VER 1 .
U0100-LOST COMMUNICATION WITH ECM/PCM
For complete wiring diagrams refer to SYSTEM WIRING DIAGRAMS article.
When Monitored:
With the ignition on
Battery voltage between 10 and 16 volts
IOD fuse installed
Set Condition:
2007 Dodge Nitro R/T
2007 BRAKES ABS - Electrical Diagnostics - Nitro
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст