Dodge Nitro. Manual — part 406
REMOVAL
LATCH - REAR DOOR
Fig. 196: Electrical Connector, Carrier Plate, Screws & Door
Courtesy of CHRYSLER LLC
1. Remove the carrier plate, see REMOVAL.
Fig. 197: Disconnecting/Connecting Latch Electrical Connector
Courtesy of CHRYSLER LLC
2. Disconnect the latch electrical connector.
2007 Dodge Nitro R/T
2007 ACCESSORIES AND EQUIPMENT Body - Nitro
Fig. 198: Carrier Plate Slots
Courtesy of CHRYSLER LLC
3. Turn the carrier plate over and slide the latch bracket assembly to remove from carrier.
Fig. 199: Release Rod & Swing Clips
Courtesy of CHRYSLER LLC
4. Remove the release rod (1) by disengaging the two swing clips (2).
NOTE:
All the lock rods are color coded to help identify the location for the
particular lock rod.
2007 Dodge Nitro R/T
2007 ACCESSORIES AND EQUIPMENT Body - Nitro
Fig. 200: Removing/Installing First Latch Attachment Point
Courtesy of CHRYSLER LLC
5. Remove the first latch attachment point from the latch bracket.
Fig. 201: Removing/Installing Second Latch Attachment Point
Courtesy of CHRYSLER LLC
6. Remove the second latch attachment point from the latch bracket.
NOTE:
The latch has three attachment points to the latch bracket.
2007 Dodge Nitro R/T
2007 ACCESSORIES AND EQUIPMENT Body - Nitro
Fig. 202: Removing/Installing Third Latch Attachment Point
Courtesy of CHRYSLER LLC
7. Remove the third latch attachment point from the latch bracket and remove the latch from the latch
bracket.
INSTALLATION
LATCH - REAR DOOR
Fig. 203: Removing/Installing First Latch Attachment Point
Courtesy of CHRYSLER LLC
1. Install the first latch attachment point to the latch bracket.
NOTE:
The latch has three attachment points to the latch bracket and need to be
attached in the following order:
2007 Dodge Nitro R/T
2007 ACCESSORIES AND EQUIPMENT Body - Nitro
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст