Dodge Nitro. Manual — part 472
2. Push down on the center of the trough (1) to flatten it out and install the remaining trough guide (3) and
guide shoe (2) into the track.
Fig. 592: Separating/Installing Trough Pins From Glass Lift Mechanisms
Courtesy of CHRYSLER LLC
3. Install the trough guide pins into the glass lift mechanism (3) and seat fully.
4. Install the glass, see INSTALLATION.
WEATHERSTRIP/SEALS
WEATHERSTRIP - A-PILLAR
REMOVAL
WEATHERSTRIP - A-PILLAR
2007 Dodge Nitro R/T
2007 ACCESSORIES AND EQUIPMENT Body - Nitro
Fig. 593: Push Pin, Windshield A-Pillar Molding & Clips
Courtesy of CHRYSLER LLC
1. Using a trim stick C-4755 or equivalent, remove the push pin (1).
2. Remove the windshield A-pillar molding (2) and clips (3) from the windshield A-pillar.
INSTALLATION
WEATHERSTRIP - A-PILLAR
Fig. 594: Push Pin, Windshield A-Pillar Molding & Clips
Courtesy of CHRYSLER LLC
1. Install the windshield A-pillar molding (2) and clips (3) to the windshield A-pillar.
2. Install the push pin (1).
WEATHERSTRIP - FDB - INNER
2007 Dodge Nitro R/T
2007 ACCESSORIES AND EQUIPMENT Body - Nitro
REMOVAL
WEATHERSTRIP - FDB - INNER
Fig. 595: Removing/Installing Inner Door Weatherstrip
Courtesy of CHRYSLER LLC
1. Remove the door trim panel, see REMOVAL.
2. Rotate the outer belt molding outboard while pulling up to disengage the retention tabs.
INSTALLATION
WEATHERSTRIP - FDB - INNER
Fig. 596: Removing/Installing Inner Door Weatherstrip
Courtesy of CHRYSLER LLC
1. Press the belt molding onto the trim panel flange starting at the rear and working forward.
2007 Dodge Nitro R/T
2007 ACCESSORIES AND EQUIPMENT Body - Nitro
2. Install the door trim panel, see INSTALLATION.
WEATHERSTRIP - FDB - OUTER
REMOVAL
WEATHERSTRIP - FDB - OUTER
Fig. 597: Removing Outer Belt Molding
Courtesy of CHRYSLER LLC
1 - OUTER BELT MOLDING
2007 Dodge Nitro R/T
2007 ACCESSORIES AND EQUIPMENT Body - Nitro
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст