Dodge Nitro. Manual — part 503
Fig. 24: Identifying Pedal Position Switch
Courtesy of CHRYSLER LLC
2. Pry pedal position switch (1) off clutch master cylinder.
INSTALLATION
INSTALLATION
Fig. 25: Identifying Pedal Position Switch
Courtesy of CHRYSLER LLC
1. Snap pedal position switch (1) on clutch master cylinder.
2007 Dodge Nitro R/T
2007 CLUTCH Clutch - Nitro
Fig. 26: Identifying Wiring Harness & Pedal Position Switch
Courtesy of CHRYSLER LLC
2. Connect harness (1) to clutch pedal position switch (2).
2007 Dodge Nitro R/T
2007 CLUTCH Clutch - Nitro
2007 ENGINE
Cooling - Nitro
DESCRIPTION
DESCRIPTION
The cooling system regulates engine operating temperature. It allows the engine to reach normal operating
temperature as quickly as possible, maintains normal operating temperature and prevents overheating.
The cooling system also provides a means of heating the passenger compartment. The cooling system is
pressurized and uses a centrifugal water pump to circulate coolant throughout the system. A separate and
remotely mounted, pressurized coolant tank using a pressure/vent cap is used.
COOLING SYSTEM COMPONENTS
The cooling system consists of:
Charge Air Cooler (Turbocharged vehicles only)
2 Speed Electric Cooling Fan
Engine driven fan with viscous clutch (Diesel Engine)
A aluminum-core radiator with plastic side tanks
Combined Coolant Recover Container/Washer Reservoir (Gas Engine)
Combined coolant pressure bottle/overflow system with pressure cap
Radiator
Water pump
Combination A/C condenser/transmission oil cooler (automatic transmission)
Thermostat
Coolant
Water pump
Hoses and hose clamps
OPERATION
OPERATION
2007 Dodge Nitro R/T
2007 ENGINE Cooling - Nitro
2007 Dodge Nitro R/T
2007 ENGINE Cooling - Nitro
Fig. 1: Coolant Flow - 3.7L/4.7L
Courtesy of CHRYSLER LLC
The cooling system regulates engine operating temperature. It allows the engine to reach normal operating
temperature as quickly as possible. It also maintains normal operating temperature and prevents overheating.
The cooling system also provides a means of heating the passenger compartment. The cooling system is
pressurized and uses a centrifugal water pump to circulate coolant throughout the system.
DIAGNOSIS AND TESTING
DEAERATION
1 - LH CYL. HEAD
2 - AIR BLEED
3 - THERMOSTAT LOCATION
4 - RH CYL. HEAD
5 - RH BANK CYL. BLOCK
6 - LH BANK CYL. BLOCK
7 - COOLANT TEMP. SENSOR
2007 Dodge Nitro R/T
2007 ENGINE Cooling - Nitro
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст