Dodge Nitro. Manual — part 553
Fig. 64: Identifying Half Shaft & Knuckle
Courtesy of CHRYSLER LLC
10. Pull out on the steering knuckles (2) and push the half shaft (1) out of the knuckles.
11. With a pry bar remove the half shafts (1) from the axle.
Fig. 65: Identifying Oil Filter Drain Tray & Vent Hose
Courtesy of CHRYSLER LLC
12. Remove oil filter drain tray (1) and vent hose (2) from differential cover.
2007 Dodge Nitro R/T
2007 DRIVELINE Differential & Driveline - Nitro
Fig. 66: Identifying Front Axle Bracket Cradle Nut & Front Axle Bracket Bolts
Courtesy of CHRYSLER LLC
13. Support axle with a lift/jack.
14. Remove front axle bracket nut and bolt (1) from crossmember. Remove front axle bracket nuts and bolts
(2) from axle housing and remove bracket.
Fig. 67: Identifying Nut/Bolt & Right Axle
Courtesy of CHRYSLER LLC
15. Remove nut and bolt (1) from right axle (2) bracket.
2007 Dodge Nitro R/T
2007 DRIVELINE Differential & Driveline - Nitro
Fig. 68: Identifying Bolts & Rear Axle Bracket
Courtesy of CHRYSLER LLC
16. Remove bolts (1) from rear axle bracket (2).
17. Lower axle and from vehicle.
INSTALLATION
FRONT AXLE - 186FIA
Fig. 69: Identifying Bolts & Rear Axle Bracket
Courtesy of CHRYSLER LLC
2007 Dodge Nitro R/T
2007 DRIVELINE Differential & Driveline - Nitro
1. Lift axle into vehicle.
2. Install bolts (1) in rear axle bracket (1) and tighten to 88 N.m (65 ft. lbs.).
Fig. 70: Identifying Nut/Bolt & Right Axle
Courtesy of CHRYSLER LLC
3. Install bolt (1) and nut in right axle (2) bracket and tighten to 61 N.m (45 ft. lbs.).
Fig. 71: Identifying Oil Filter Drain Tray & Vent Hose
Courtesy of CHRYSLER LLC
4. Install oil filter drain tray (1) and vent hose (2) on differential cover.
2007 Dodge Nitro R/T
2007 DRIVELINE Differential & Driveline - Nitro
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст