Dodge Nitro. Manual — part 949
Fig. 48: Fill/Drain Plug And I.D. Tag Locations
Courtesy of CHRYSLER LLC
8. For NV140, fill transfer case with correct fluid. Refer to DESCRIPTION . Correct as necessary.
9. Install the transfer case fill plug (1). Tighten the plug to 12 - 15N.m (9-11 ft.lbs.).
10. Install rear crossmember and skid plate, if equipped. Tighten crossmember bolts to 41 N.m (30 ft. lbs.)
torque.
11. Remove transmission jack and support stand.
12. Lower vehicle and verify transfer case shift operation.
SPECIFICATIONS
TRANSFER CASE - MP140
SPECIFICATIONS
1 - I.D. TAG
2 - FILL PLUG
3 - DRAIN PLUG
2007 Dodge Nitro R/T
2007 TRANSFER CASE MP140 - Service Information - Nitro
TORQUE SPECIFICATIONS
SPECIAL TOOLS
SPECIAL TOOLS-MP140
Fig. 49: Flange Wrench C-3281
DESCRIPTION
SPECIFICATION
FLUID TYPE
MOPAR® AFT+4
Capacity
.85L (180 pints)
DESCRIPTION
N.m
Ft. Lbs.
In. Lbs.
Bolt, crossmember
41
30
-
Plugs, drain/fill
12 - 15
9 - 11
-
Bolts, case half
27
20
-
Nut, companion flange
122-176
90-130
-
Screws, Chain Guide Rail
5-8
-
44-71
Nuts, Transfer Case to
Transmission
35
26
-
Bolt, Damper to Transfer
Case
27
20
-
2007 Dodge Nitro R/T
2007 TRANSFER CASE MP140 - Service Information - Nitro
Courtesy of CHRYSLER LLC
Fig. 50: Installer C-3972-A
Courtesy of CHRYSLER LLC
2007 Dodge Nitro R/T
2007 TRANSFER CASE MP140 - Service Information - Nitro
Fig. 51: Universal Driver Handle - C4171
Courtesy of CHRYSLER LLC
2007 Dodge Nitro R/T
2007 TRANSFER CASE MP140 - Service Information - Nitro
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст