Dodge Nitro. Manual — part 206
Fig. 67: Measuring Voltage Of (D52) Dynamics Sensor High Data Link Circuit
Courtesy of CHRYSLER LLC
Disconnect the Anti-Lock Brakes Module harness connector.
Disconnect the Dynamics Sensor harness connector.
Turn the ignition on.
Measure the voltage of the (D52) Dynamics Sensor High Data Link circuit.
Is there any voltage present?
Yes
Repair the (D52) Dynamics Sensor High Data Link circuit for a short to voltage.
Perform ABS VERIFICATION TEST.
2007 Dodge Nitro R/T
2007 BRAKES ABS - Electrical Diagnostics - Nitro
No
Go to 4).
4) CHECK THE (D52) DYNAMICS SENSOR HIGH DATA LINK CIRCUIT FOR A SHORT TO
GROUND
Fig. 68: Measuring Resistance Of (D52) Dynamics Sensor High Data Link Circuit Between Ground
And Dynamics Sensor Harness Connector
Courtesy of CHRYSLER LLC
Turn the ignition off.
Measure the resistance of the (D52) Dynamics Sensor High Data Link circuit between ground and the
Dynamics Sensor harness connector.
Is the resistance below 5.0 ohms?
Yes
2007 Dodge Nitro R/T
2007 BRAKES ABS - Electrical Diagnostics - Nitro
Repair the (D52) Dynamics Sensor High Data Link circuit for a short to ground.
Perform ABS VERIFICATION TEST.
No
Go to 5).
5) CHECK THE (D52) DYNAMICS SENSOR HIGH DATA LINK CIRCUIT FOR AN OPEN
2007 Dodge Nitro R/T
2007 BRAKES ABS - Electrical Diagnostics - Nitro
2007 Dodge Nitro R/T
2007 BRAKES ABS - Electrical Diagnostics - Nitro
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст