Dodge Nitro. Manual — part 382
Fig. 16: Trim Stick C-4755
Courtesy of CHRYSLER LLC
Fig. 17: Torx Bit Set C-4794-B
Courtesy of CHRYSLER LLC
2007 Dodge Nitro R/T
2007 ACCESSORIES AND EQUIPMENT Body - Nitro
Fig. 18: Moldings Remover C-4829-A
Courtesy of CHRYSLER LLC
Fig. 19: Outer Belt Molding Remover - 9093
Courtesy of CHRYSLER LLC
2007 Dodge Nitro R/T
2007 ACCESSORIES AND EQUIPMENT Body - Nitro
Fig. 20: Strain Gauge Holder 9689-A
Courtesy of CHRYSLER LLC
DOOR - FRONT
CARRIER PLATE
REMOVAL
CARRIER PLATE - FRONT DOOR
CAUTION: Do not attempt to remove the trim panel the conventional way. This door
panel has hooks holding it to the door rather than push pins. The door
module must be removed as an assembly. Carefully follow these
instructions in order to prevent unnecessary damage to the trim panel.
2007 Dodge Nitro R/T
2007 ACCESSORIES AND EQUIPMENT Body - Nitro
Fig. 21: Using Battery Terminal Removal Tool To Disconnect Negative Battery Cable From Battery
Courtesy of CHRYSLER LLC
1. Loosen the battery terminal nut and use a battery terminal removal tool (2) to disconnect the negative
battery cable from the battery (1).
2. Remove the trim panel from the door. See REMOVAL.
Fig. 22: Door Plug & Rear Exterior Handle Nut
Courtesy of CHRYSLER LLC
3. Remove the door plug (2).
2007 Dodge Nitro R/T
2007 ACCESSORIES AND EQUIPMENT Body - Nitro
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст