Dodge Nitro. Manual — part 604
Fig. 309: Identifying Pinion Mate Shaft & Differential Case
Courtesy of CHRYSLER LLC
11. Install pinion mate shaft (1) into differential case (2) and through thrust washers and differential pinions.
Fig. 310: Identifying Pinion Mate Shaft & Lock Screw
Courtesy of CHRYSLER LLC
12. Align hole in mate shaft (1) with hole in the differential case. Apply Mopar Lock & Seal Adhesive or
equivalent to lock screw (2) threads. Install lock screw and tighten to 26 N.m (19 ft. lbs.).
13. Install differential cover.
BEARING-DIFFERENTIAL CASE
2007 Dodge Nitro R/T
2007 DRIVELINE Differential & Driveline - Nitro
REMOVAL
BEARINGS-DIFFERENTIAL CASES
2007 Dodge Nitro R/T
2007 DRIVELINE Differential & Driveline - Nitro
Fig. 311: Removing Differential Bearings From Case With Puller/Press C-293-PA And Adapters C-293-
48 And Plug 8926-2
Courtesy of CHRYSLER LLC
1. Remove differential case from axle.
2. Remove differential bearings (3) from the case with Puller/Press C-293-PA (1) and Adapters C-293-48
(2) and Plug 8926-2 (5).
INSTALLATION
BEARINGS-DIFFERENTIAL CASE
Fig. 312: Installing Differential Bearings With Installer C-4340 And Handle C-4171
Courtesy of CHRYSLER LLC
2007 Dodge Nitro R/T
2007 DRIVELINE Differential & Driveline - Nitro
1. Install differential (2) bearings (3) with Installer C-4340 (4) and Handle C-4171(1).
2. Install differential case in axle.
GEAR-PINION/RING
REMOVAL
GEAR-PINION/RING
RING GEAR REMOVAL - GAS ENGINE
Fig. 313: Identifying Ring Gear & Bolts
NOTE:
The ring and pinion gears are serviced in a matched set. Never replace one gear
without replacing the other matched gear.
2007 Dodge Nitro R/T
2007 DRIVELINE Differential & Driveline - Nitro
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст