Dodge Nitro. Manual — part 817
Fig. 3: Identifying Shift Knob & Boot
Courtesy of CHRYSLER LLC
1. Disconnect negative battery cable.
2. Remove counsel, shift knob (1) and boot (2).
Fig. 4: Removing/Installing Shift Lever Screw, Lever And Inner Boot
Courtesy of CHRYSLER LLC
3. Remove shift lever screw (1), lever (2) and inner boot (3).
2007 Dodge Nitro R/T
2007 MANUAL TRANSMISSION NSG370 - Diagnosis & Overhaul - Nitro
Fig. 5: Drain Plug
Courtesy of CHRYSLER LLC
4. With vehicle in neutral, position vehicle on hoist.
5. Remove drain plug (1) and drain fluid.
2007 Dodge Nitro R/T
2007 MANUAL TRANSMISSION NSG370 - Diagnosis & Overhaul - Nitro
Fig. 6: Identifying Transfer Case & Transmission
Courtesy of CHRYSLER LLC
6. Mark installation reference marks on propeller shaft/shafts and remove shafts.
7. Remove transfer case shift cable, wiring connector and vent hose, if equipped.
8. Remove transfer case (1) from transmission (2), if equipped.
Fig. 7: Transmission Mount & Crossmember
2007 Dodge Nitro R/T
2007 MANUAL TRANSMISSION NSG370 - Diagnosis & Overhaul - Nitro
Courtesy of CHRYSLER LLC
9. Support transmission with jack.
10. Remove transmission mount (1) bolts and crossmember (2) bolts. Remove transmission mount (1) with
crossmember (2).
Fig. 8: 3.7L Catalytic Converter
Courtesy of CHRYSLER LLC
11. Vehicles with 3.7L engine, remove exhaust pipe with converters (3).
2007 Dodge Nitro R/T
2007 MANUAL TRANSMISSION NSG370 - Diagnosis & Overhaul - Nitro
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст