Dodge Viper SRT-10 (ZB). Manual — part 92
WASHER PUMP MOTOR -
EXPORT
REMOVAL
(1) Remove the right front wheel and tire (Refer to
22 - TIRES/WHEELS - REMOVAL).
(2) Remove the right headlamp access panel.
(3) Disconnect the washer pump electrical connec-
tor.
(4) Disconnect the washer pump hose and remove
the pump from the reservoir.
INSTALLATION
(1) Install the washer pump into the lower reser-
voir.
(2) Connect the washer hose and the electrical con-
nector to the washer pump.
(3) Install the right headlamp access panel.
(4) Install the right wheel and tire assembly (Refer
to 22 - TIRES/WHEELS - INSTALLATION).
(5) Operate the windshield washer and check for
leaks. Repair as necessary.
HEADLAMP WASHER
RESERVOIR - EXPORT
REMOVAL
REMOVAL - LOWER RESERVOIR
(1) Remove the front bumper reinforcement (Refer
to 13 - FRAME & BUMPERS/BUMPERS/FRONT
BUMPER REINFORCEMENT - REMOVAL).
(2) Remove right front tire (Refer to 22 - TIRES/
WHEELS - REMOVAL).
(3) Remove the right front brake vent tube.
(4) Disconnect the windshield washer pump, head-
lamp washer pump, and horn electrical connectors
(Fig. 12) and (Fig. 13).
(5) Disconnect the breather hose.
(6) Disconnect the lower reservoir supply hose
(Fig. 12).
(7) Remove the upper mounting bolts (Fig. 13).
(8) Remove the lower mounting bolt and remove
the lower reservoir.
Fig. 12 LOWER RESERVOIR - FRONT VIEW
1 - BOLT
2 - SUPPLY HOSE & CLAMP
3 - WINDSHIELD WASHER PUMP HOSE
4 - WINDSHIELD WASHER PUMP CONNECTOR
Fig. 13 LOWER RESERVOIR - SIDE VIEW
1 - BOLTS
2 - HORN CONNECTOR
3 - LOWER RESERVOIR
4 - HEADLAMP WASHER PUMP CONNECTOR
8R - 14
WIPERS/WASHERS
ZB
REMOVAL - UPPER RESERVOIR
(1) Disconnect and isolate the battery negative
cable.
(2) Raise vehicle.
(3) Remove right front tire.
(4) Remove right wheelhouse splash shield (Refer
to
23
-
BODY/EXTERIOR/LF
WHEELHOUSE
SPLASH SHIELD - REMOVAL).
(5) Disconnect the breather hose.
(6) Disconnect lower reservoir supply hose (Fig.
14).
(7) Remove mounting fasteners and remove upper
washer fluid reservoir.
INSTALLATION
INSTALLATION - LOWER RESERVOIR
(1) Position the lower washer reservoir in the vehi-
cle and install the lower mounting bolt. Torque the
bolt to 4 N·m (35 in. lbs.).
(2) Install the upper mounting bolts. Torque the
bolts to 4 N·m (35 in. lbs.).
(3) Connect the lower reservoir supply hose.
(4) Connect the breather hose.
(5) Connect the windshield washer pump, head-
lamp washer pump, and horn electrical connectors.
(6) Install the right front brake vent tube.
(7) Install the front bumper reinforcement (Refer
to 13 - FRAME & BUMPERS/BUMPERS/FRONT
BUMPER REINFORCEMENT - INSTALLATION).
(8) Operate the headlamp and windshield washers,
and inspect for leaks. Repair as necessary.
INSTALLATION - UPPER RESERVOIR
(1) Position the upper washer fluid reservoir and
install the mounting fasteners. Torque the fasteners
to 4 N·m (35 in. lbs.).
(2) Connect the lower reservoir supply hose.
(3) Connect the breather hose.
(4) Install right wheelhouse splash shield (Refer to
23 - BODY/EXTERIOR/LF WHEELHOUSE SPLASH
SHIELD - INSTALLATION).
(5) Install right front tire.
(6) Lower vehicle.
(7) Connect battery negative cable.
(8) Operate the washers and check for leaks.
Repair as necessary.
Fig. 14 LOWER RESERVOIR SUPPLY HOSE
1 - UPPER RESERVOIR
2 - LOWER RESERVOIR SUPPLY HOSE
ZB
WIPERS/WASHERS
8R - 15
HEADLAMP WASHER RESERVOIR - EXPORT (Continued)
WIRING
TABLE OF CONTENTS
page
page
LOCATION . . . . . . . . . . . . . . . . . . . . . . . . 8W-91-1
POWER DISTRIBUTION . . . . . . . . . . . . . . . 8W-97-1
ZB
WIRING
8W - 1
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст