Skoda Kodiaq (2019 year). Manual — part 10
Supported audio sources and file formats - Swing
Supported audio sources
Source
Interface
Type
Specification
File system
SD card
SD reader
Standard
size
SD, SDHC, SDXC
FAT16
VFAT
FAT32
exFAT
USB
devices
USB 1.x; 2.x
and 3.x or
higher with
support of
USB 2.x
MSC
USB stick;
HDD (without any spe-
cial software);
USB devices that sup-
port MSC operation
MTP
Devices with the An-
droid operating system
or Windows mobile
(mobile phone, tablet)
Apple
Devices with the iOS
operating system
(iPhone, iPod, iPad)
Blue-
tooth
®
-
Player
-
-
Bluetooth logs A2DP
and AVRCP (1.0-1.5)
-
Supported audio file formats
Codec type
(File formats)
File suffix
Max bit rate
Maximum
sampling
rate
Playlists
Windows Media
Audio 9 and 10
wma
384 kbit / s
96 kHz
m3u
pls
wpl
asx
MPEG-1; 2 and 2.5
(Layer-3)
mp3
320 kbit / s
48 kHz
The GPT standards (GUID partition table) method structured audio sources
are not supported by Infotainment.
Files that are protected by Digital Rights Management (DRM) technology can-
not be played back by Infotainment.
Images
Image viewer
main menu
Applies to Infotainment Columbus, Amundsen, Bolero.
Fig. 197
Images: Main menu
›
To display the main menu, tap the
sensor field and then tap the function
surface .
Main menu
Select the image source
Folder / Image List
Display the previous image
Switching on the slideshow
Switching off the slideshow
Display of the next image
Menu settings for Images
Rotate the image 90° anticlockwise
Rotate the image 90° clockwise
Display the initial image size while retaining the aspect ratio
Guidance to GPS coordinates (Amundsen; the display only occurs if the
image contains GPS coordinates) (applies to Infotainment Columbus,
Amundsen)
A
157
Images
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Control viewed images
Operation
Action
Display of the next image
Finger motion across the screen to the left
(with initial representation)
Tap
Display the previous image
Finger motion across the screen to the right
(with starting representation)
Tap
Increase the image size
Touch screen using two fingers and pull apart
Turning the knob to the right (not applica-
ble to Infotainment Columbus)
Reduce the image size
Touch screen using two fingers and close to-
gether
Turning the knob to the left (not applica-
ble to Infotainment Columbus)
Moving the image with an en-
larged display
Drag your finger over the screen in the re-
quired direction
Rotate by 90 °
Touch screen using two fingers and move
clockwise or counter clockwise (only availa-
ble with start representation)
Tap or
Maximum magnification of
representation
Double finger tap on the screen
Display the initial image size
while retaining the aspect ratio
Double tap on the screen again
Pressing the knob (not applicable to Info-
tainment Columbus)
CAUTION
Viewing images in the Infotainment screen is not supported by connected Ap-
ple devices.
Supported image file formats and sources
Supported image sources
Source
Type
Specification
File system
SD card
Standard size
SD, SDHC, SDXC
FAT16
VFAT
FAT32
exFAT
NTFS
USB devices
USB stick;
HDD (without
special software)
USB 1.x; 2.x and
3.x or higher with
support of USB
2.x
CD / DVD (Applies
to Infotainment Co-
lumbus)
CD-R / RW (Up
to 700 MB);
DVD±R/RW
ISO9660;
Joliet (Level 1,2,3)
;
UDF 1.x;
UDF 2.x
-
Supported file formats
Codec type
(File formats)
File suffix
Max. resolution
(Megapixels)
BMP
bmp
4
JP (E) G
jpg; jpeg
4; 64
GIF
gif
4
PNG
png
4
Note
■
The max. supported image size is 20 MB.
■
The GPT standards (GUID partition table) method structured image sources
are not supported by Infotainment.
158
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
DVD
video player
Main menu
Only valid for Infotainment Columbus.
Fig. 198
Video DVD: Main menu
›
To display the main menu, insert a CD / DVD in the corresponding slot in the
external module.
›
or: In the main menu Media, select the video source, display the folder/track
list and start the video file.
Main menu
Select a video source
Playback timeline
Information for the selected video file (e.g., video title, chapter)
Display the video DVD menu
Video DVD menu settings
Note
For safety reasons, the image display is switched off at speeds over 5 km/h.
Only the sound continues. The respective message appears on the screen.
Control playback
Operation
Action
Play / pause
Tap /
Play the previous video
Tap within 3 s from the start of the
track playback
A
B
C
Operation
Action
Play the current video from the start
Tap after 3 s from the start of the
playback
Fast rewind
Press and hold
Play the next video
Tap
Fast forward
Press and hold
Forward / rewind the video at the de-
sired time
Tapping the playback time axis
B
a)
The longer the function surface is held, the faster the fast forward/reverse.
DVD menu
Fig. 199
DVD menu
›
to display the DVD menu in the Video DVD main menu, tap on the function
surface
Description of the DVD menu
Operating surface
Example of the displayed menu
Function surfaces on the operating surface
Symbol
Operation
/
Move the operating surface left / right
/
Show / hide full screen display of the control sur-
face
Close the control surface
Movement in the EPG/teletext
A
B
159
DVD
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Symbol
Operation
Confirmation
Main menu
Return to Video DVD main menu
Supported video sources and file formats
Supported video sources
Source
Interface
Type
Specification
File sys-
tem
SD card
SD reader
Standard size
SD, SDHC, SDXC
FAT16
VFAT
FAT32
exFAT
NTFS
USB
devices
USB 1.x; 2.x
and 3.x or
higher with
support of
USB 2.x
MSC
USB stick;
HDD (without
any special soft-
ware);
USB devices that
support MSC op-
eration
CD/DVD
CD/DVD
Drive
CD-R / RW (Up to
700 MB);
DVD±R/RW;
default DVD;
DVD-Video;
ISO9660;
Joliet (Level 1,2,3)
;
UDF 1.x;
UDF 2.x
-
Supported video file formats
Codec type
(File formats)
File suffix
Max. frames per
second
Max. resolution
MPEG-1
.mpeg
30
352 x 288
MPEG-2
25
720 x 576
MPEG-4
.mp4
QuickTime
.mov
Matroska
.mkv
DivX; XviD
.avi
MJPEG
Media Command
Operation
Introduction to the subject
Applies to Infotainment Columbus, Amundsen.
Fig. 200
ŠKODA Media Command appli-
cation
The Media Command function allows playback of audio files or videos in up to
two TabletsThat are connected to Infotainment via WLAN, to control Info-
tainment.
The Media Command function enables operation of tablets with the operating
system Android or iOS.
The prerequisite for the Media Command function is enabled data transfer, the
application installed in the tablet “ŠKODA Media Command” as well as Info-
tainment control approved using the application
“ŠKODA Media Command” application
The ŠKODA app is available in the App Store and Google Play online shops.
After entering the following address into the web browser, the website is
opened with information on the ŠKODA mobile applications.
http://go.skoda.eu/service-app
“ŠKODA Media Command” application
›
Scan the QR code
Connect tablet to Infotainment
›
Switch on the infotainment hotspot (the sensor field)
and then the func-
tion area → WLAN → Mobile hotspot → Mobile hotspot).
›
Turn on WLAN in the tablet.
160
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
›
Establish a WLAN connection in the tablet
›
In the tablet, start the “ŠKODA Media Command” application.
CAUTION
■
If several devices are connected to the Infotainment system by means of
WLAN, there is the danger of WLAN overloading and thus also the inability of
Media Command to function properly.
■
High-definition video playback (e.g. HD) may cause playback problems or
problems connecting the tablets to the Infotainment system.
Main menu
Fig. 201 One tablet / two tablets
›
To display the main Media Command menu, tap the
sensor field and
then tap the function surface .
Main menu
Information on playing track
Playback timeline with a slider
Playback control
Image from the video being played back
Name of the tablet used/Switch to main menu of two tablets (when icon
displayed )
Increase/decrease the tablet volume
Display of main menu and operation of first tablet (symbol )
Display of main menu and operation of second tablet (symbol )
Selection of the playback source
Wi-fi settings
A
B
C
D
E
F
G
Select source and control playback
›
To select the playback source, in the main menu, tap on the functional sur-
face and select the source tablet.
›
To playback, select the category and then the title.
If two tablets are connected, the title playback starts in the two tablets at the
same time.
Playback can be controlled via Infotainment or on each tablet, and are inde-
pendent from each other. This means there is an option to playback different
titles on the tablets at the same time.
Playback control
Operation
Action
Play / pause
Tap
Plays the current track from the start
Tap
after 3 s from the start of the track
playback
Play the previous title
Tap
within 3 seconds from the start of the
track playback
Play back the next title
Tap
Movement within the track is possible by touching your finger on the timeline
B
Note
Some tablet types allow playback of audio files or videos by an inserted SD
card in the tablet. Playback of these tracks may be limited.
Supported file formats
Type
Format
Operating system
Android
Operating system
iOS
Video
MPEG-4 Part 2
MPEG-4 Part 10
(H264)
XVID
161
Media Command
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Type
Format
Operating system
Android
Operating system
iOS
Audio
MPEG-1; 2 and
2,5
Layer 3 (mp3)
AAC
(4.1)
M4A
(4.1)
OGG
FLAC
WAV
(4.1)
Telephone
Introductory information
Introductory information
WARNING
The general binding country-specific regulations for operating mobile tele-
phones in the vehicle must be observed.
Telephone
Applies to Infotainment Columbus, Amundsen, Bolero.
Fig. 202
Telephone: Main menu
The Telephone main menu is displayed if a telephone is connected to Infotain-
ment or a SIM card with activated telephone services is inserted in the external
module.
›
To display, tap the sensor field
.
›
or: Tap the
sensor field and then the function surface .
Main menu
Name of the connected phone (by tapping the list of paired phones dis-
played)
Preset station buttons for favourite contacts
Choice of storage group for the preferred contacts
Name of the telephone service provider (with active roaming, the symbol
appears before the name )
A
B
C
D
162
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Main telephone icon
▶
- a telephone connected via Bluetooth
®
▶
- a SIM card with activated telephone services, inserted in the exter-
nal module
List of connected telephones, which are available as the source of tele-
phone contacts
▶
- no telephone is connected for telephone contacts
▶
- a telephone is connected for telephone contacts
Change the main phone to the extension telephone
Enter the telephone number
List of contacts
Menu with text messages (SMS)
Call list
Menu settings for Telephone
Symbols in the status bar
Signal strength of the telephone network, data connection type if re-
quired
A telephone connected via Bluetooth
®
(applies to Infotainment Colum-
bus)
Charge status of the telephone battery
Missed call
Current call
Incoming SMS
ID of the telephone's wireless charging function
fotainment Columbus)
PIN code of the SIM card was not entered
E
F
G
Telephone
Applies to Infotainment Swing.
Fig. 203
Telephone: Main menu
The Telephone main menu appears when a telephone is connected to Infotain-
ment.
›
To display, press the
button.
If another, menu id displayed which was open last, to display the Telephone
main menu, press the button again
.
Main menu
Name of the main telephone (tap to display the list of paired telephones)
Preset station buttons for favourite contacts
Choice of storage group for the preferred contacts
Name of the telephone service provider (with active roaming, the sym-
bol appears before the name )
Enter the telephone number
List of contacts
Call list (missed calls, in addition to the function surface, the number of
calls when missed is displayed)
Starting voice control of the connected phone (e.g. Apple Siri, Google
Voice)
Menu settings for Telephone
Symbols in the status bar
Signal strength of the telephone service network
Charge status of the telephone battery
Missed call
Current call
A
B
C
D
163
Telephone
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Pairing and connecting
Introduction to the subject
To connect a telephone with Infotainment, the two devices must be paired via
Bluetooth
®
.
Depending on the Infotainment type, up to 20 external devices can be paired
with the device. After reaching the maximum number, the pairing of the next
external device will replace that of the device that has not been used for the
longest period of time.
Connection to an already paired telephone is established automatically after
the ignition is switched on. Or, it is sufficient to search for the phone in the list
of paired devices.
The range of the connection to Infotainment is limited to the passenger com-
partment.
Compatibility and update
By reading the QR code
on page 126 or after typing the following
address into the web browser, information about the compatibility of phones
and updates are available for Infotainment Bluetooth
®
can be displayed.
http://go.skoda.eu/compatibility
Conditions for pairing
The ignition is switched on.
The Bluetooth
®
function of Infotainment and the telephone is switched on.
The visibility of Infotainment and the telephone is switched on.
The telephone is within range of the Bluetooth
®
signal of Infotainment.
The telephone is compatible with Infotainment.
There is no external device connected to Infotainment using Apple
CarPlay.
Pairing and connection process
Pair the telephone with Infotainment
›
Search available Bluetooth
®
devices in your telephone.
›
Select the name of the Infotainment system.
The name of the Infotainment system can be checked in the Telephone main
menu if you tap on the function surface → Bluetooth in the Name: menu item.
›
Confirm the PIN code (enter and confirm if necessary).
The phone is either connected to Infotainment or just linked, depending on the
number of already connected external devices and on the use of the SIM card
inserted in the external module (applies to Infotainment Columbus)
Pair Infotainment with the telephone
›
If no telephone is connected to the Infotainment system, press the but-
ton/sensor field
and then tap the Find telephone function surface or press
the
sensor field, and then tap the function surface → Find mobile phone.
›
If one telephone is connected to the infotainment system, then, in the Tele-
phone main menu, tap on the
→ Find mobile phone function surface.
›
If a SIM card with activated telephone services is inserted in the external
module of infotainment Columbus, then, in the Telephone main menu, tap on
the → Find mobile phone.
›
Select the desired telephone from the list of visited external Bluetooth
®
devi-
ces.
›
Confirm the PIN code (enter and confirm if necessary).
WARNING
Do not pair and connect a telephone to the Infotainment system while driv-
ing the vehicle - there is risk of an accident!
Connect phone using the rSAP profile
Applies to Infotainment Columbus with the SIM card slot in the external mod-
ule.
A phone that has been connected via the Bluetooth
®
rSAP profile (remote
transfer of SIM data) can be used for phone and data services.
Pair the phone with Infotainment
›
Turn on the ignition and switch on Infotainment.
›
In the Telephone main menu, switch on the → Business phone “interface”.
›
Switch on Bluetooth
®
visibility in the phone and allow the connection via the
Bluetooth
®
rSAP profile.
›
Search for a phone and connect to the device
164
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
If the Bluetooth
®
rSAP profile is supported by the telephone to be connected,
then the infotainment system tries to connect to the phone using this profile
with priority.
Functional impairment
In the following cases, the phone cannot be connected to Infotainment via the
Bluetooth
®
rSAP profile.
▶
The SIM card is plugged into the external module.
▶
An external device is connected to Infotainment using Apple CarPlay or
Android Auto.
Note
Vehicle antennas are used to receive the mobile radio signal of the connected
phone.
Possible connection types
Depending on the number of connected Bluetooth
®
devices, connection type, as well as the use of the SIM card in the external module, the following functions
are available.
Only applies to Infotainment Columbus
connec-
tion
version
The first device (main telephone)
The second device (additional telephone)
Third device
Fourth device
Telephone
SIM card
(In the external mod-
ule)
Telephone
SIM card
(In the external mod-
ule)
1.
rSAP
incoming / outgoing
Calls, text messages,
telephone contacts,
Data connection:
Bluetooth
®
player
-
HFP (incoming calls),
Bluetooth
®
player
-
Bluetooth
®
-
2.
HFP (Incoming / out-
going
Calls), text messages,
telephone contacts,
Bluetooth
®
player
-
HFP (incoming calls),
Bluetooth
®
player
Data connection
Bluetooth
®
-
165
Telephone
-------------------------------------------------------------------------------------------------------------------------------------------------------------
connec-
tion
version
The first device (main telephone)
The second device (additional telephone)
Third device
Fourth device
Telephone
SIM card
(In the external mod-
ule)
Telephone
SIM card
(In the external mod-
ule)
3.
HFP (Incoming / out-
going
Calls), text messages,
telephone contacts,
Bluetooth
®
player
-
-
Incoming calls,
text messages
Data connection
Bluetooth
®
-
4.
-
incoming / outgoing
Calls, text messages,
Phone contacts
,
Data connection
HFP (incoming calls),
text messages
Bluetooth
®
-
Bluetooth
®
Bluetooth
®
a)
In every connection variant, there is only the option of connecting one external device to Infotainment as a Bluetooth
®
player.
b)
If telephone contacts from the third device are imported into Infotainment, it's not possible to use the telephone contacts of the SIM card inserted in the external module.
Applies to Infotainment Amundsen, Bolero
The first device (main telephone)
The second device (additional tele-
phone)
HFP (Incoming / outgoing calls), SMS,
telephone contacts,
Bluetooth
®
player
HFP (incoming calls),
Bluetooth
®
player
a)
Only an external device can be connected to Infotainment as a Bluetooth
®
player.
Applies to Infotainment Swing
The first device (main telephone)
The second device (additional tele-
phone)
HFP (Incoming / outgoing calls),
telephone contacts,
Bluetooth
®
player
Bluetooth
®
player
a)
Only an external device can be connected to Infotainment as a Bluetooth
®
player.
Managing paired external devices
›
In the Telephone main menu, tap on the function surface → Bluetooth →
Paired devices.
In the list of paired external devices, the following symbols may appear for the
individual external devices.
Applies to Infotainment Columbus, Amundsen, Bolero
Symbol
Symbol
colour
Operation
grey
External device can be connected as telephone
Green
External device is connected as telephone
grey
External device can be connected as Bluetooth
®
play-
er
White
External device is connected as Bluetooth
®
player
Applies to Infotainment Columbus with the SIM card inserted in the exter-
nal module
Symbol
Symbol
colour
Operation
grey
An external device can be connected for using tele-
phone contacts and the text message function from
this external device
blue
An external device is connected and using of tele-
phone contacts and the text message function can be
carried out from this external device
166
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Applies to Infotainment Swing
Symbol
Symbol
colour
Operation
White
External device can be connected as telephone
Green
External device is connected as telephone
White
External device can be connected as Bluetooth
®
play-
er
Green
External device is connected as Bluetooth
®
player
Connection set-up
▶
Select the desired external device from the list of paired external devices.
▶
Select the desired profile from the list of available Bluetooth
®
profiles - .
If external Bluetooth
®
devices are already connected to the device, then during
the connection process messages and options for the possible connection
type (e.g. replacement of the connected external Bluetooth
®
device) are dis-
played.
Disconnection
▶
Select the desired external device from the list of paired external devices.
▶
Select the desired profile from the list of available Bluetooth
®
profiles - .
Delete the paired external device
▶
To delete, tap on one of the following function surfaces.
- Delete all external devices
- Delete the desired external device
▶
Confirm the deletion by tapping on the function surface Delete.
Delete all or All areas
Use the SIM card in the external module
Applies to Infotainment Columbus with the SIM card slot in the external mod-
ule.
Fig. 204 Insert SIM card in the external module
A SIM card size “mini” (standard size 25x15 mm) must be used.
The SIM card can be used for phone and data services.
The SIM card slot is located in an external module in the storage compartment
on the front passenger side
Switching SIM card use on / off in the external module
›
In the Telephone main menu, switch on the → Business phone “interface”.
Insert the SIM card
›
Insert the SIM card into the appropriate slot
corner on the left and the contacts facing downwards until it “locks”.
Using the SIM card for the first time
When using the SIM card in the external module, select the use type.
Calls too - enabling data and telephone services.
Only data connections - enabling of data services only.
Set the network parameters for Internet connection if required
.
By using the SIM card for phone services, the connection to the connected
phones is terminated.
Enter the PIN code and save
›
If the SIM card is protected by a PIN code, then the PIN code of the SIM card
must be entered.
167
Telephone
-------------------------------------------------------------------------------------------------------------------------------------------------------------
›
Confirm the entered PIN code by tapping confirm.
›
or: Tap the functional surface to save and confirm the PIN code.
Change the PIN code
›
The PIN code can be changed in the Telephone main menu, in the → PIN
setup → Change PIN menu item
Changing SIM card usage
›
In the Telephone main menu, tap on the function surface → Use SIM card only
for data connection function surface.
Remove the SIM card
›
Press the inserted SIM card and remove it.
CAUTION
■
When inserting an incorrectly sized SIM card, there is a risk of damage to the
external module.
■
Avoid using an adapter for the SIM card as the SIM card may fall out while
driving due to vehicle vibrations - There is the risk of damage to the external
module.
Telephone functions
Enter telephone number and select
Enter a telephone number and dial
›
In the Telephone main menu, tap on the function surface .
Function surfaces of the numerical keyboard
Enter the last dialled number / dial the telephone number entered
Emergency call (only applies to some countries)
Breakdown call in case of breakdown
Information call (for information regarding the products and services of
the ŠKODA brand )
Choosing the mailbox number (For Infotainment Swing, the function is
not supported)
Delete the last number entered
Display of function surfaces for the movement of the cursor in the
input line
Search for a contact using the numeric keypad
The numeric keypad can also be used for a contact search.
For example, if you enter 32, the unit will display contacts with the letter se-
quence DA, FA, EB, etc. next to the numerical keypad.
Voicemail box (does not apply to the infotainment Swing)
▶
To select the voice mailbox number, tap the functional surface .
If the voicemail number or was not imported or entered, then this can be en-
tered or changed as follows.
▶
In the Telephone main menu, tap on the function surface → User profile →
Mailbox number:.
▶
Enter the number of your voice mailbox.
List of telephone contacts
Fig. 205 List of telephone contacts / contact details
›
In the Telephone main menu, tap on the function surface and a list of tele-
phone contacts will be displayed
.
If the main telephone is connected to Infotainment, the telephone contacts
from the telephone are used.
If a SIM card with activated telephone services is located in the external mod-
ule of Infotainment Columbus, the SIM card telephone contacts are available.
Another external device to import telephone contacts can be selected by tap-
ping the function surface
F
Functional surfaces
Contact search
Dial a number in the telephone contact list (if a telephone contact contains
several telephone numbers, a menu containing the telephone numbers as-
signed to this contact is displayed after the contact is selected)
Display the contact details
A
B
168
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Select the telephone number in the contact details
Processing the telephone number of the contact before dialling
Infotainment Columbus, Amundsen, Bolero:
The contact name can be read out by a Infotainment's generated voice
Opens the menu for sending a text message (SMS)
Infotainment Columbus, Amundsen:
Start the route guidance to the contact address
Import list
After the primary telephone and/or the SIM card (applies to Infotainment Co-
lumbus) connects to the infotainment system for the first time, the import of
the telephone contacts to the infotainment memory starts. The import can
take several minutes.
In the infotainment phonebook, there are 4000 (applies to Infotainment Co-
lumbus) and 2000 (applies to Infotainment Amundsen, Bolero, Swing) free
storage locations for imported telephone contacts. Each contact can contain
up to 5 telephone numbers.
The number of imported contacts can be determined in the menu item →
User profile → Import contacts: or Import contacts.
If an error occurs during the import, an appropriate message appears on the
screen.
Refresh list
When the telephone reconnects with Infotainment, the list is automatically up-
dated.
The update can be performed manually as follows.
▶
In the Telephone main menu, tap on the function surface → User profile →
Import contacts: or Import contacts.
C
Management of preferred contacts (favourites)
Fig. 206
Favourite contacts
Assigning favourites
›
In the main menu Telephone, tap on the desired function surface
A
›
Select the desired contact (if necessary one of the contact numbers).
Connecting to a favourite
The functional surfaces of preferred contacts allow for an immediate dial of
the contact telephone number.
The favourites are available in two storage groups.
›
To the change Storage Group tap on the functional surface
B
.
›
To choose tap on the assigned function area
A
.
Change allocated favourites
›
In the main Telephone menu, press and hold the desired function surface
A
.
›
Select the desired contact (if necessary one of the contact numbers).
Delete a favourite
›
In the Telephone main menu, tap on the function surface → User profile →
Manage favourites.
›
Press the desired function surface of the preferred contact and confirm the
deletion.
You can delete all contacts by tapping on the function surface Delete all / All
areas and confirming the delete process.
169
Telephone
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Function surface for emergency call
If the vehicle is not equipped with the buttons for the Care Connect service
, the position of the last function surface in the first group of favour-
ites will show the function surface for an emergency call is displayed in the
status bar. In some countries, this function may not be available.
The function surface can be assigned a different number for the preferred
contact.
To restore the emergency number, it is necessary to remove the telephone
from the list of paired external devices
and then to pair and con-
nect again.
Call list
Fig. 207 Call history / Contact details
›
In the Telephone main menu, tap on the function surface and a call list will
be displayed
The call list can also be displayed during a telephone call.
Functional surfaces
Setting the display depending on the type of call
▶
All areas - List of all calls
▶
Missed calls/Missed calls - List of missed calls
▶
Dialled numbers - List of dialled numbers
▶
Received calls / Received calls - list of received calls
Dial the contact number/telephone number
Symbols of the call type
▶
- Answered call
▶
- Outgoing call
▶
- Missed call
A
B
Edit the telephone number before dialling (not applicable to Infotainment
Swing)
Display the contact details
▶
C
- Dial the contact number
Phone call
Depending on the conversation context, the following functions can be execu-
ted.
End dialling / reject incoming call / end call
Accept incoming call / return to held call
Switch on/off ringer
Hold a call
Switch off/on microphone
Infotainment Columbus, Amundsen, Bolero:
Set up a conference call
Show caller details (if the contact is stored in the list)
Switch on/off hands-free (call to the telephone / switch to Infotainment)
▶
To switch off the hands-free system, in the Telephone main menu, tap on the
function surface →Tap on Hands-free during a call.
▶
To switch off the hands-free system, tap on the function surface during a
call.
Conference
Applies to Infotainment Columbus, Amundsen, Bolero.
The conference call is a shared call with between three and six participants.
Start a conference call/invite additional participants
›
During a call/conference, make the next call.
›
or: Take the new incoming call by tapping the function surface
.
›
To initiate conference call or. return to the conference call, tap on the
function surface .
Ongoing conference call
During an ongoing conference call, the call duration is displayed on the screen.
Depending on the context, the following functions can be selected.
170
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Hold a conference call - Leave the conference temporarily (the confer-
ence continues in your absence)
Return to the held conference call
Switch off/on microphone
End conference call
Conference call details
Conference details
▶
During the ongoing conference call, tap on the function surface .
A list of other conference participants is displayed. The following functions
can be selected depending on the type of telephone.
View details of participant
Talk to a participant separately from the conference call
End the call to a conference participant
Text messages (SMS)
Main menu
Applies to Infotainment Columbus, Amundsen, Bolero.
Fig. 208
Main menu text messages
›
In the Telephone main menu, tap on the function surface The main menu
for text messages appears
» Fig. 208
›
If required, select whether the SIM card inserted in the external module or
the telephone (applies to Infotainment Columbus) is to be used as the source
of the text messages.
Depending on your type of connected telephone, you can perform the follow-
ing functions.
Opening a list of templates for quick answers
New text message - Creating and sending the message
Inbox- Open a list of received messages
Sent - Open a list of sent messages
Outbox - Open a list of messages not sent
Drafts- Open a list of drafts (messages in progress)
Deleted- Open a list of deleted messages
Send contact details - Send contact details (business card) (applies to Info-
tainment Columbus)
Select source of text messages (applies to Infotainment Columbus)
Display for the selection of the source of text messages (this applies to the
Infotainment Columbus with the SIM card slot in the external module)
If a SIM card used only for data services is located in the external module and if
a phone that supports the Bluetooth
®
profile MAP is connected to Infotain-
ment, then it is possible to adjust the source from which a text message menu
will be displayed after tapping on the function surface in the main Telephone
menu.
▶
In the Telephone main menu, tap on the function surfaces → Text message
settings → Standard account.
▶
Select the desired menu item.
New text message
Creating and sending the message
›
In the main menu of the text messages, tap on the function surface inter-
face
›
Write a text message and confirm. A view of the text message is displayed.
›
Tap the function surface .
›
Select the recipient of the message from the displayed contact list or tap on
the and enter the telephone number.
›
To add additional recipients, tap on the function surface .
›
To send the text message, tap the function surface .
Viewing the text message
After opening the view message function, the following functions can be exe-
cuted.
The text can be read out by Infotainment's generated voice
The text can be stored as a draft
A
171
Telephone
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Open a list of templates with the open to replace the recorded text with
the selected template
Open the contact list
The message can be edited, as long as the text range is within the entered
view.
Contact list
After the list has been opened the following functions can be executed.
Insert a contact in the recipient list
Enter the telephone number
Return to view the message
Tap on the Find function surface to open a list of available telephone contacts.
After selecting the contact number or entering the telephone number, the re-
cipient list will be displayed in the screen.
Recipient list
The following functions can be executed by tapping on one of the functional
surfaces.
Display contact list with the option of adding/removing additional re-
cipients (tap on the function surface to return to the recipient list .
Removal of the contact from the recipient list
Sending the message
Return to view the message
Received text message
When you receive a new message, the number of new messages received is
displayed within the function surface and at the same time the icon in the
status bar is displayed in the status bar.
›
To open a list of received messages, go to the Telephone main menu and
tap on function surface → .
›
Select a message.
The message content and the following menu is displayed.
The text can be read out by Infotainment's generated voice
Display a menu with additional options
▶
Reply with template - Reply using a template
▶
Delete current text message - Distance of displayed text message (applies to
Infotainment Columbus, when the SIM card is inserted in the external
module or the telephone is connected via the Bluetooth
®
-profile rSAP)
▶
Display numbers - Recognition of telephone numbers in the message in-
cluding the contact number (recognised numbers can be dialled directly
or edited before dialling, or may be sent to this message)
Forwarding a message with the option to edit the message before sending
Reply to the sender via a message
172
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст