Skoda Kamiq (2021 year). Manual in english — page 5
Infotainment Amundsen › Infotainment keyboard
91
In principle, operation by touch is identical to the op-
› Gesture control is ach-
eration of a mobile phone.
ieved by slowly moving
the hand back and
The following operating modes are speifi to the In-
forth approximately 8
fotainment system.
cm above the lower
Dragging up or down with two fiÄgers
edge of the screen.
Depending on the set-
▶ Quickly review the list
of phone contacts
ting, a recognized ges-
ture can be oÄfiÙmed acoustically and animated.
▶ Switch 2D/3D map dis-
play
Displaying operation help
› Tap on
Dragging left or right with two fiÄgers
Settings
▶ Display next page of
The following basic screen functions are set in the
the HOME menu
menu
Screen:
▶ Brightness level of the screen
▶ Switch off the screen
▶ Display the time
▶ oÄfiÙmatioÄ sounds and animations
Pulling apart with two fiÄgers
▶ Enlarge image
Infotainment keyboard
▶ Zoom into the map
Keypad overview
The arrangement of the keyboard characters de-
pends on the set infotainment language.
Depending on the context, the following types are
Pulling together with two fiÄgers
used in infotainment:
▶ Alphanumeric
▶ Minimize image
▶ Numeric
▶ Zoom out of the map
▶ Keyboard for input
▶ Keyboard for search
Turn two fiÄgers
▶ Rotate image
▶ Rotate the map
Keypad example
Contactless gesture control
A
Input line
The Infotainment menus marked with the symbol
▶ Delete characters before the cursor
can be controlled by hand gestures.
▶ Tap: delete the last character
▶ Hold: delete all characters one after the oth-
er
▶ Display functional surfaces for moving the
cursor in the input line
▶ Move cursor to the left
92
Infotainment Amundsen › Voice control
▶
Move cursor to the right
The entry to be searched for can be entered includ-
ing diacritics.
B
Entries found
The keyboard will only provide characters that
▶ Show list
match the stored entries.
C
Keypad functional surfaces
› To display searched entries tap
▶ Change to lowercase
▶ Switch to fiÙst having an upper-case letter,
Show additional keypad languages
followed by lower-case letters
To use the additional keypad languages, the desired
languages must be set fiÙst.
▶ Switch to uppercase
▶
/
Switch to the language keypad
› Tap or repeatedly tap the Ĕa£ symbol until the
desired language keypad is displayed.
▶
Switch to the numeric and character key-
pad
Further character variants
▶
/ Switch to other character variants
› Press and hold the sign with the symbol
▶
Show additional keyboard languages
› Select the desired symbol.
▶
Insert spaces
▶
The next line
Setting up additional keyboard languages
▶ Hold: Show more character variants
› Tap
Additional keypad languages.
▶ Show password
▶
oÄfiÙm the entered characters
Voice control
Numeric keypad
Functionality
Voice control principle
Voice control works according to the principle of
dialogue between the user and the Infotainment sys-
tem.
The user says a voice command. The Infotainment
system responds or executes the voice command.
Advanced voice control
The vehicle's advanced voice control enables the ve-
Keypad example
hicle functions to be searched and operated online.
A
Input line
Advanced voice control understands ĔueÄt whole
sentences. You do not need to use set commands or
▶ Delete characters before the cursor
phrases.
▶ Tap: delete the last character
The advanced voice control can, for example, search
▶ Hold: delete all characters
for special destinations or dictate SMS messages if
B
Keypad functional surfaces
the connected telephone makes this possible.
This function allows you to combine the search in
▶
oÄfiÙm the entered characters
the online and offliÄe data of the Infotainment. The
If it is possible depending on the context, alpha-
transition between online and offliÄe search is seam-
numeric characters can be entered by holding a
less and imperceptible to the user.
function area with the number.
Operating conditions
Operation
✓ Ignition on
The Infotainment keypad is used to enter characters,
✓ Infotainment switched on
letters and numbers.
Operating conditions for advanced voice control
The keypad will be automatically displayed when In-
To use the advanced voice control, the following
fotainment prompts for characters.
conditions must also be met:
Find
✓ The vehicle supports the function.
When entering characters, corresponding entries are
searched for.
Infotainment Amundsen › Voice control
93
✓ The vehicle has Infotainment and functions that
Ending voice control
can be controlled by the advanced voice control.
› Press the
button on the multifunction steering
✓ The ŠKODA Connect services are active.
wheel twice.
✓ The vehicle is within range of a contractual mo-
Or:
bile network, through which the connection to
› Say the voice command “cancel” during voice com-
ŠKODA Connect Services is ensured.
mand input.
✓ The level of protection of personal data is set to
Share my position .
Restriction
Requirement for recognition of the activation
command
For some Infotainment languages, there is no voice
✓ Activated menu item
Voice control Active
control available. The Infotainment system will indi-
cate this.
Operation
The messages are generated by Infotainment. Flaw-
less clarity (e.g. road or city name) cannot always be
Switch on voice control
guaranteed.
› Press the
button on the multifunction steering
You cannot use voice control while a phone call is in
wheel.
progress.
Or:
› Say the activation command “OK Laura”.
Settings
After switching on, the icon is displayed in the sta-
tus bar.
The following voice control functions are set in the
menu
Voice control:
Enter voice command
▶ oÄfiÙmatioÄ tones
› Speak a voice command with voice control switch-
ed on.
▶ Enable/disable use of the activation word.
During recognition of the voice command, the icon
is displayed.
Self help
The Infotainment system then executes the voice
command or plays the message. During the message,
Starting acoustic help
the icon is displayed.
› If the Infotainment system is expecting a voice
command, say “Help”.
After the execution of the voice command, voice
The “Help” voice command can be issued repeatedly
control is switched off.
for further tips on voice control.
Correcting a voice command
Displaying the help
› During voice command input, press the
button
on the multifunction steering wheel and say a new
› Tap on
voice command.
Or:
Stopping voice control
› If Infotainment is expecting a voice command, say
Stopping leaves more time for voice command input,
“Overview”.
e.g. for searching for a phone contact.
Switch example voice commands display on / off
› Move your fiÄ£eÙ up or down over the Infotain-
The system offeÙs the option of displaying example
ment screen.
voice commands after switching on the voice con-
trol in the Infotainment screen.
Or:
› To turn
voice control oÄ/off, tap Show in Info-
› Say the voice command “pause”.
tainment system.
Resuming stopped voice control
› Press the
button on the multifunction steering
wheel.
Or:
› Tap on in the Infotainment screen.
Stopping the played back message
› Press the
button on the multifunction steering
wheel.
94
Infotainment Amundsen › Control Centre
Control Centre
Or:
› Tap
Overview
Analogue and digital radio player
Display of the control centre
› A Tap and select the desired frequency range.
› Press the bar at the
› Tap and search for or select the desired station.
top of the screen and
› Tap on
drag down.
Closing the control centre
› Tap on
Or:
› Wait 5 seconds.
Control Centre
A
Select source
The Infotainment control centre can be used for
quick access to the following functions:
B
Station name
C
Information about the broadcast content
D
Station logos
List of available stations
Show favourites
Information about the station
Search stations manually (valid for AM and FM)
Settings
List of available analogue and digital radio stations
A
Display and administration of functional surfaces
› Tap on
of preferred features
Played station
B
Display list of informational messages
Station stored on the presets
C
Preferred functions
A tÙaffi radio station is set
D
Display user account management
The DAB transmitter emits images which are
displayed in the information to the station
E
Setting the personal data protection level
Manual update of the station list
F
Setting the instrument and key illumination
In the station list, information about the programme
type and the channel ideÄtifiatioÄ of the regional
channel can be displayed.
Set functional areas of preferred features
Web radio player
› To display editing mode hold any function surface
› A tap and select a web radio station.
of the preferred feature.
› Tap and search or select web radio.
› To add the preferred feature, move the desired
› Tap on
feature from the top of the screen to the function-
al surface at the bottom of the screen.
› To close edit mode, tap on .
Radio
Overview
Display menu
› Tap
Infotainment Amundsen › Radio
95
A
Select source
Search for web radio stations and podcasts
B
Station name
Recently played web radio stations and podcasts
C
Information about the broadcast content
100 most popular web radio stations depending
on the Infotainment language that has been set
D
Station logos
Go to podcasts and select
List of web radio and podcasts
Search for and select web radio stations and pod-
Show favourites
casts based on the selected country
Information about the programme as well as the
Search for and select web radio stations and pod-
broadcast content of the web radio
casts based on the selected language
Settings
Search for and select web radio stations and pod-
casts based on the selected genre
Podcast player
› Tap A and select an online radio station.
See list of related podcasts based on content lis-
tened to
› Tap and search for or select the desired pocast.
› Tap
See list of related podcasts based on content lis-
tened to
The podcasts are shown in the displayed lists
with the icon .
List of favourite stations and podcasts
›
In the menu Radio, tap on
A
Select source
B
Podcast name
C
Information about the broadcast content
D
Podcast logo with the symbol
Tap: Start playback
A
Select source
Tap: Pause
B
Radio text
Tap: Go back 15 secs
C
Station buttons for favourite stations and pod-
Tap: Go forward 15 secs
casts
View episodes of the podcast being played
List of web radio stations and podcasts
Operation
Show favourites
Select station
Show information about the podcast
Settings
List of web radio stations and podcasts
› Tap on
› Tap or at the top of the screen.
96
Infotainment Amundsen › Radio
SCAN function
› Hold the line with the name of the desired station
The function plays receivable stations of the selec-
or podcast.
ted frequency range in succession for a few seconds
› Tap the desired preset button.
each.
With podcasts, it is not possible to save the indi-
› To start automatic play
, tap Scan.
vidual episodes.
› To stop automatic play, tap
Deleting favourites
Find stations manually
› In the menu Radio
Delete memory entries .
Manual search is available for AM and FM stations.
› To delete a station button for preferred stations,
› To display the functional surface for the FM sta-
tap the desired station button and oÄfiÙm the de-
tion, turn on menu item
Advanced settings Station dis-
letion.
play: FM switch on
› To delete all station buttons for preferred stations
› In the Radio main menu, tap
Clear all and oÄfiÙm the deletion.
› To search in sequence, tap or next to the dis-
Functional surfaces for analogue and digital ra-
played frequency range scale.
dios
Or:
Applies to AM, FM and DAB frequency ranges.
› Hold down the scroll mark on the frequency range
The variant for changing stations using the function
scale and move it to the desired value.
surface in the Radio menu is set as follows:
› In the menu Radio
Arrow buttons: .
Limitation
› Select the variant for switching between the sta-
tions stored on the station buttons or the stations
▶ Infotainment supports digital radio reception in
stored in the list of available stations.
DAB and DAB+ formats.
Functional areas for web radio stations and
▶ Car parks, tunnels, tall buildings or mountains can
podcasts
restrict radio reception.
Applies to web radio stations and podcasts.
▶ In the rear side windows, there are antennas for re-
The variant for changing stations using the function
ceiving the radio signal.
surface in the Radio menu is set as follows:
Covering the panes with foils or metal-coated la-
› In the menu Radio
Arrow buttons: .
bels may affet the reception of the radio signal.
▶ The ŠKODA AUTO company assumes no responsi-
› Select the variant for switching between the sta-
tions stored on the station keys or the last web
bility for the availability, correct functioning and
broadcast information of the RDS service.
stations and podcasts listened to.
Switch traffic reception (TP) for stations oÄ/off
Applies to FM and DAB frequency range.
Settings
›
In the menu Radio
Traffic program (TP) .
Save the station currently being listened to as a fa-
Assign station logo from the Infotainment memory
vourite from the Radio main menu
Applies to the FM and DAB frequency ranges.
› Hold the desired station key for preferred stations
until the station is stored.
Infotainment offeÙs the option of assigning logos,
which are stored in the Infotainment memory, to the
Save station to favourites from the list of available
stations.
stations
Applies to AM, FM and DAB frequency ranges.
› In the menu Radio
Station logos .
› Select the desired station and logo.
› Hold the line with the name of the desired station.
› Tap the desired preset button.
Switching off the station logo display
Applies to the FM and DAB frequency ranges.
Save channels from the list of web radio stations
and podcasts
› In the menu Radio
Station logos .
Valid for web radio stations and podcasts
› To select the desired station. No station logo .
› Select a web radio station as the playback source.
Activating / deactivating automatic station logo
› Tap on
assignment
› Go to the desired web radio station or podcast and
Applies to the FM and DAB frequency ranges.
select it.
Infotainment Amundsen › Media
97
When the function is switched on, a station logo
Displaying FM / DAB stations or FM stations in the
from the Infotainment memory is assigned when the
list of available stations
station is stored on a preset.
Applies to the FM and DAB frequency ranges.
› In the menu Radio
Advanced settings Tap Automatic selec-
Depending on the following setting, the stations of
tion of station logos .
the selected frequency range are displayed in the list
of available stations.
Turn oÄ/off radio text reception
Applies to the FM and DAB frequency ranges.
› In the menu Radio
Advanced settings Station display: .
› Select one of the following menu items:
When the function is switched on and the station
buttons are displayed, you can see more information
▶ FM/DAB - the list shows available FM and DAB sta-
about the content broadcast from the station to
tions.
which you are listening.
▶ FM - the list shows available FM stations.
› In the menu Radio
Radio text .
Sound quality of web radio stations and podcasts
Regional FM station logo
Applies to web radio stations and podcasts.
Applies to the FM frequency range.
› To adjust the sound quality, in the Radio menu tap
Infotainment provides the option of using ouÄtÙû-
on
Audio quality: .
speifi FM station logos.
› Choose low or high quality.
› In the menu Radio
Advanced settings Region for station
The quality you set affets the amount of data used
logo: .
in the data connection.
› Choose country.
Quality also depends on the speed and availability of
the data connection.
Switching additional announcements of the DAB
transmitter on / off
If playback failure occur, reduce the sound quali-
Applies to the DAB frequency range.
ty.
When the function is switched on, other announce-
ments are received as tÙaffi announcements. These
Media
include e.g. weather news, sports reports, fiÄaÄial
news etc.
What you should be mindful of
› In the menu Radio
Advanced settings Tap Additional DAB
▶ Do not save any important data or that which has
announcements .
not been backed up on the connected audio sour-
Switch RDS oÄ/off
ces. ŠKODA assumes no responsibility for lost or
Applies to the FM frequency range.
damaged files or connected audio sources.
The menu item is only available for some countries.
▶ When changing or connecting an audio source, this
may cause sudden changes in volume. Reduce the
› In the menu Radio
Advanced settings Radio Radio Data
volume before changing or connecting an audio
System (RDS) .
source.
If the RDS function is disabled, the following menu
▶ When connecting an audio source, the source in-
items in FM station settings are not available:
formation messages can be displayed. These mes-
▶ TÙaffi program (TP)
sages must be observed and, if necessary, con-
fiÙmed.
▶ Radio text
▶ The national copyright laws that apply in your
▶ RDS Regional
country must be observed.
▶ Automatic frequency change (AF)
▶ Regional station logo.
Switch automatic switching to a similar DAB trans-
Overview
mitter on / off
Display menu
Applies to the DAB frequency range.
› Tap
When the function is switched on and there is signal
Or:
loss from the DAB station being listened to, Infotain-
ment automatically sets another DAB station with
› Tap
similar content.
› In the menu Radio
Advanced settings Tap Switch to a simi-
lar station if weak reception .
98
Infotainment Amundsen › Media
Music player
Tap: Start playback
Tap: Pause
Within 3 seconds of starting playback, tap: play
the previous song
After 3 seconds from the start of playback, tap:
to play the current title from the beginning
Hold: fast rewind within the track
Tap: play the next track
Hold: fast forward within the track
A
Choose source
Movement within the title is also possible by drag-
ging the fiģe٠over the timeline.
Manage files / multimedia database
Show favourites
Advanced operation
Turn on / off repeat playback of the current
Details about the track being played
track
Settings
Turn on / off repeat playback of the current al-
bum / folder
Video player
Turn on / off random playback of the current al-
bum / folder
Save the played track in the “My playlist” playlist
“My playlist” management
▶ To display the playlist, tap
▶ To manage the playlist tap in the displayed play-
list.
The following activities can be carried out in playlist
management:
▶ Control playback.
A
Select source
▶ Change the order of a title in the list by holding and
Manage files / multimedia database
moving to the desired position.
▶ Delete title.
Show favourites
Show video
Shrink image display
Restriction
Enlarge the image display
The availability of some media operation functions is
Settings
dependent on the connected source and the soft-
ware being used, e.g. Bluetooth®.
Player controls
Settings
Operation - Basics
Manage favourites
A
Album image / symbol of the connected source
› To save, hold the desired functional area for fa-
▶ Tap: list available albums
vourites A .
Infotainment Amundsen › Media
99
› Choose one of the available list entries B .
› To delete all favourites tap on Clear all and oÄfiÙm
the deletion.
› To Clear, in the menu media
tap on Manage favour-
ites .
Traffic
› To turn oÄ/off tÙaffi monitoring during playback
› To delete a favourite, tap on the list entry and con-
of media files, go to the Media in the main menu
fiÙm the deletion.
and tap on Traffic program (TP) .
Or:
Supported sources and files
Supported sources
Source
Interface
Type
SpeifiatioÄ
File system
USB stick
HDD
(without special
software)
MSC
USB devices that
use the USB mass
VFAT
storage support
FAT16
protocol
FAT32
USB 1.x; 2.x 3.x
Devices running
exFAT
USB
or higher with USB
the Android or
NTFS
2.x support
Windows Phone
MTP
operating system
that support the
Media Transfer
Protocol
Devices with the
iOS operating sys-
Apple
HFS+
tem and the iAP2
protocol
Bluetooth® proto-
cols
Bluetooth® player
Bluetooth®
-
-
A2DP and AVRCP
(1.0
- 1.6)
Compatibility of mobile devices
It is possible to check the ŠKODAweb pages to see if Infotainment is compatible with the selected mobile
device being tested. This check is carried out by using the following reference or by reading the QR code:
All information given is incidental and serves as information.
The ŠKODA AUTO company cannot guarantee full functionality and compatibility, e.g. due to a software up-
date of the Infotainment and the mobile devices.
100 Infotainment Amundsen › Media
Supported audio files
Compression for-
Codec type
File exten-
Max. bit rate
Max. sam-
Multi channels
mat
sion
[kbps]
pling rate
[kHz]
MPEG 1 Layer 2
32 - 384
32, 44, 48
Mono, stereo,
mp2
MPEG 2 Layer 2
8 - 160
16, 22, 24
Joint stereo
MPEG
MPEG 1 Layer 3
32 - 320
32, 44, 48
Mono, dual mono,
MPEG 2 Layer 3
mp3
16, 22, 24
Stereo, Joint
8 - 160
MPEG 2.5 Layer 3
8, 11, 12
Stereo
Windows Media
8, 16, 22, 32,
6 - 192
Audio 7
44, 48, 96
Windows Media
8 - 384
Audio 8
8, 11, 16, 22,
Windows Media
Mono, stereo,
WMA
wma
8 - 768
32, 44, 48,
Audio 9 and 9.1
Joint stereo
96
Windows Media
8 - 320
Audio 9.2
Windows Media
32, 44, 48,
32 - 768
Audio 10
96
22, 24, 32,
AAC LC
44, 48
ADTS
aac
16 - 2048
Stereo
AAC HE
16, 22, 24,
AAC HEv2
32, 44, 48
22, 24, 32,
M4A LC
16 - 400
44, 48
MP4
m4a
Stereo
M4A HE
16, 22, 24,
M4A HEv2
16 - 64
32, 44, 48
8, 11, 12, 16,
Mono,
OGG
OGG-Vorbis
ogg
8 - 576
22, 24, 32,
Stereo
44, 48, 96
8, 11, 12, 16,
22, 24, 32,
Mono, stereo,
FLAC
FLAC
Ĕa
-
44, 48, 64,
Joint stereo
88, 96, 192
8, 11, 12, 16,
Mono,
RIFF
WAV
wav
64 - 3072
22, 24, 32,
Stereo
44, 48, 96
Monkey's
Monkey's
ape
8 - 192
8, 11, 12, 16,
Mono, stereo,
SBC
Bluetooth A2DP
-
8 - 345
22, 24, 32,
Joint stereo
44, 48
Mono, stereo,
OPUS
OPUS
opus
6 - 2000
8 - 48
Multichannel
Files that are protected by DRM- and iTunes® methods are not supported by Infotainment.
Supported video files
Codec type
File extension
Max. recordings per second bit rate
[Mbit/s]
mpg
mpeg
MPEG 1
1.5
m1v
mPV
mpg
mpeg
MPEG 2
15
ps
m2v
Infotainment Amundsen › Images 101
Codec type
File extension
Max. recordings per second bit rate
[Mbit/s]
MPEG 4 (H.264)
m4p
MPJEG
mp4
m4v
50
MPEG 4 (ISO)
mp4v
mov
Xvid
Xvid
20
wmv
WMV9
50
asf
Supported playlists
Codec type
File extension
M3U
m3u
M3U8
m3u8
PLS
pls
WPL
wpl
ASX
asx
Images
A
View images
▶ Show the next image
Overview
▶ Show the previous image
Display menu
▶ Start slideshow
› Tap
▶ Stop slideshow
Image viewer
B
View image
▶ Turn left
▶ Turn right
▶ Show in output size
Gesture control
▶ Display of the next im-
age
A
Select source
Manage files
Settings
▶ Display the previous
image
Operation
Operation using functional areas
▶ Increase the image size
102 Infotainment Amundsen › Mobile device management
These components have security mechanisms that
▶
Reduce the image size
minimise the risk of unauthorised access to the vehi-
cle systems.
Regular software updates help reduce the risk of un-
authorised access to vehicle systems and vehicle
functions. The following guidelines must therefore
be observed:
▶ Rotate by 90 °
› Use only media carriers, Bluetooth® devices, and
mobile devices that contain no harmful data or
malware.
› Regularly update the software provided by ŠKODA
AUTO.
We recommend having the system software and
components updated by a specialist company.
WARNING
Settings
Risk of an accident!
The following Infotainment functions are set in the
Malware in the vehicle can iÄĔueÄe and deactivate
menu:
certain vehicle functions, or take over the controls of
these where applicable.
▶ Display image size
▶ If the vehicle reacts in an unusual way, immediately
▶ Display image duration during the slideshow
reduce speed or stop the vehicle.
▶ Slideshow repeat
▶ Seek the help of a specialist garage.
WARNING
Supported sources and files
Malware in the vehicle may gain unauthorised access
to the information and data of the vehicle, and on oc-
Supported sources
casion, to connected mobile devices.
Source
Interface
Speifia-
File system
tioÄ
Overview
USB 1.x; 2.x
USB stick
VFAT
3.x
HDD
FAT16
Using mobile device management, devices can be
USB
or higher
(without
FAT32
connected, disconnected, and interchanged.
with USB
special
exFAT
2.x support
software)
NTFS
Display mobile device management
›
Tap on
Manage mobile devices.
Supported files
Codec type
File extension
Max. resolution
[Mpx]
BMP
bmp
4
JPG; JPEG
jpg; jpeg
4 (Progressive
Mode)
64
GIF
gif
4
PNG
png
4
The maximum supported image size is 20 MB.
The device enables a connection via the Blue-
tooth®“hands-free pÙofile”
Mobile device management
The device is connected via the Blue-
tooth®“hands-free pÙofile”
Cybernetic security
The device enables a connection via the Blue-
tooth® audio pÙofile
Your vehicle contains components that are used to
The device is connected via the Bluetooth® audio
exchange information and data between the vehicle
pÙofile
and the connected mobile devices or the Internet.
Remove the device from the list previously con-
nected devices
Infotainment Amundsen › Mobile device management 103
The device enables a SmartLinkconnection to be
Information about ŠKODAapplications
made via Android Auto
Detailed information about ŠKODA applications can
The device enables a SmartLinkconnection to be
be found on the website after reading the following
made via Apple CarPlay
QR code or link:
The device enables a SmartLinkconnection to be
made via MirrorLink
A
Connected / Previously connected devices
B
Available devices
Limitations of mobile devices and applications
Connection set-up
Availability of features
The availability of certain features depends on the
Connect a mobile device to Infotainment
type of mobile device, as well as that of the applica-
› Find available Bluetooth® devices in the mobile de-
tions installed.
vice.
› Select the Infotainment Bluetooth® unit.
Compatibility of mobile devices
It is possible to check the ŠKODAweb pages to see if
The unit name can be determined by tapping
Infotainment is compatible with the selected mobile
Manage mobile devices
device name:.
device being tested. This check is carried out by us-
› oÄfiÙm the PIN; enter it if necessary and then
ing the following reference or by reading the QR
oÄfiÙm.
code:
Connect Infotainment to a non-paired mobile de-
vice
›
Manage mobile devices .
› Select the desired device from the list of available
devices.
› Select the desired Bluetooth® pÙofile.
All information given is incidental and serves as in-
› oÄfiÙm the PIN; enter it if necessary and then
formation.
oÄfiÙm.
The ŠKODA AUTO company cannot guarantee full
› If two devices are connected to the Infotainment,
functionality and compatibility, e.g. due to a software
select the device to be replaced.
update of the Infotainment and the mobile devices.
Connect Infotainment to a previously connected
Bluetooth® compatibility of mobile devices
mobile device
Due to the large number of mobile devices, it is not
›
Manage mobile devices .
possible to guarantee total Bluetooth® compatibility
Or:
with Infotainment. Bluetooth® compatibility depends
on the Bluetooth® version as well as the implementa-
›
Select mobile phone .
tion of Bluetooth® protocols by the manufacturer of
› Select the desired device from the list of previous-
the mobile device.
ly connected devices.
› Select the desired Bluetooth® pÙofile.
Applications in mobile devices
› If two devices are connected to the Infotainment,
Mobile devices can be used to install applications
select the device to be replaced.
that allow you to view additional information on the
Infotainment screen, or to operate the Infotainment
SmartLink connection
system.
Infotainment provides the ability to connect Smar-
Due to the variety of applications, as well as their on-
tLink to compatible mobile devices using the follow-
going development, the available applications may
ing connection types:
not function on all mobile devices. ŠKODA AUTO as-
Android Auto
sumes no liability for their proper functioning.
Apple CarPlay
The scope of available applications and their func-
MirrorLink
tionality is dependent on the type of Infotainment, as
Mobile devices can be connected to the Infotain-
well as the vehicle and country.
ment via USB cable or Wi-Fi, as long as the mobile
device supports it.
104 Infotainment Amundsen › Telephone
› Connect the mobile device to the Infotainment via
✓ The telephone is within signal range of the Info-
a USB cable or browse and connect to a wireless
tainment's Bluetooth® unit.
network.
✓ The telephone is compatible with Infotainment.
› Tap the icon of the supported connection.
Telephone operation
Telephone
Enter telephone number
Overview
› In the Phone menu, tap on .
› Enter the telephone number using the numeric
Display menu
keypad that is displayed.
› Tap
The displayed numeric keypad can also be used
Or:
for searching for contacts.
› Tap
If, for example, the digits 32 are entered, contacts
with the letter sequence DA, FA, EB etc. are dis-
If the menu phone is not displayed, check wheth-
played next to the numeric keypad.
er the mobile device is connected.
List of telephone contacts
The list of telephone contacts is imported from the
connected main telephone.
› To display the contact list in the phone menu, tap
on
› To search within the list, tap on Enter contact .
› Enter the details you wish to fiÄd.
› To establish a connection with a contact, tap the
functional area showing the desired contact.
If a contact has multiple telephone numbers, select
A
Name of the connected telephone
the telephone number from the displayed list.
▶ Tap: Show list of previously connected phones
› To display the details for a contact, tap .
B
Name of telephone service providers
▶ If the symbol is displayed in front of the name,
Establish a connection to the voice mailbox num-
roaming is active.
ber
› In the Phone menu, tap on
C
Preset buttons for preferred contacts
Telephone conversation
Change the main telephone with the additional
Depending on the context of the telephone conver-
telephone
sation, the following functions can be selected:
Enter telephone number
End connection / reject incoming call / end call
Contact list
Answer an incoming call / return to the held call
Text messages / emails
/
Switch the ringer off / on
Hold a call
Call lists
/
Switch the microphone off / on
Settings
Show details of the caller
Reject an incoming call using an SMS message
Answer a call from the second telephone during
Conditions for connecting a telephone with
a call on the fiÙst telephone
Infotainment
The ongoing call on the fiÙst telephone is termi-
nated by accepting the call.
✓ The Bluetooth® function of the Infotainment and
the telephone needs to be switched on.
› To switch the call tone from the speakers to the
telephone, go to telephone in the menu and tap on
The Bluetooth® function of the Infotainment is
speakerphone .
switched on in the menu item
Manage mo-
bile devices
Bluetooth.
› To switch the call tone from the telephone to the
speakers, tap
✓ Visibility of the Infotainment is switched on.
The visibility of the Infotainment is switched on in
the menu item
Manage mobile devices
Visibility.
Infotainment Amundsen › T
elephone
105
Conference call
Send e-mails
A conference call is a joint telephone conversation
› In the Telephone
menu, tap Emails
New
with a minimum of three and a maximum of six par-
emails .
ticipants.
› Write an e-mail and oÄfiÙm that an e-mail is dis-
› Make the next call during an ongoing conversation/
played.
conference.
The text can be edited when the text area within
Or:
the view is tapped.
› Search for or select the recipient of the email.
› Accept a new incoming call by tapping
› Add more recipients or oÄfiÙm selected recipi-
› To start a conference call, tap
ents.
During an ongoing conference call, the following
› Enter the subject of the e-mail.
functions can be selected depending on the context:
› Tap on Send .
Hold the conference call and leave temporarily
Show received e-mails
(the conference will continue in the background)
› In the Telephone
menu, tap Emails
Return to the held conference call
/
Switch the microphone off / on
› Select the desired e-mail.
End conference call
› To switch graphic ÄotificatioÄs regarding the re-
Show details of the conference call
ceipt of a new email on or off, tap in the Phone
In the details of the conference call, depending on
menu New message notifications .
the connected telephone, the following functions
can be selected:
Settings for Infotainment telephone functions
Show details of the conference call partici-
pants
Telephone-Infotainment-Connection types
End conversation with the conference call par-
The way in which the telephone is connected de-
ticipant
pends on the number of phones currently connected
Conversation with a participant outside of the
to the Infotainment:
conference call
▶ No telephone - The telephone is connected as a
main telephone.
Send a text message
› In the Telephone
menu, tap Messages
New
▶ One telephone - The telephone is connected as an
SMS .
additional telephone.
› Write a text message and oÄfiÙm; a view of the
▶ Two telephones - Select the telephone to be re-
message is displayed.
placed.
The message can be edited when the text area
› To switch between the main telephone and the
within the view is tapped.
additional telephone, tap on in the Phone menu.
› Search for or select the recipient of the message.
Connect the telephone to Infotainment
› Add more recipients or oÄfiÙm selected recipi-
› Find available Bluetooth® devices on the phone.
ents.
› Select the Infotainment Bluetooth® unit.
› Tap on Send .
The unit name can be determined by the menu
Display received text messages
item
Manage mobile devices
Device name:.
› In the Telephone
menu, tap Messages
or
› oÄfiÙm the PIN; enter it if necessary and then
oÄfiÙm.
› Messages that are received are displayed as indi-
Connect Infotainment to a non-paired telephone -
vidual messages or as messages in a conversation,
no telephone is connected
depending on the following setting.
› Tap on
To switch the display of messages in a conversa-
Or:
tion on or off, tap in the Phone
menuShow messag-
› Tap on
es as conversation .
› Follow the instructions in the Infotainment screen.
› To switch graphic ÄotificatioÄs regarding the re-
ceipt of a new message on or off, tap in the Phone
Connecting Infotainment to a non-paired tele-
menu New message notifications .
phone - another telephone is connected
› Tap on
Manage mobile devices.
Infotainment offeÙs the possibility to read the
text message (context-dependent) by means of the
› Select the desired device from the list of available
generated Infotainment voice if is tapped.
devices.
106 Infotainment Amundsen › Wi-Fi
› Select the desired Bluetooth® pÙofile.
Depending on the type of telephone, import oÄfiÙ-
› oÄfiÙm the PIN; enter it if necessary and then
matioÄ may be required.
oÄfiÙm.
Update telephone contacts
The telephone is connected as an additional tele-
When re-connecting the telephone with Infotain-
phone.
ment, an automatic update of the list is carried out.
Or:
› For manual update of the list in the phone
menu tap on Import contacts .
› If two telephones are connected to the Infotain-
ment, select the telephone to be replaced.
Sort contacts in the phone book
› In the Telephone
menu Sort by: Tap and select the
Connect Infotainment to a previously paired tele-
phone
sorting type.
›
Manage mobile devices .
Ringtone
Or:
Some phones do not allow the use of the telephone
ringtone; instead, the Infotainment ringtone is used.
Select mobile phone .
› For setting the Infotainment ringtone in the
› Select the desired device from the list of previous-
phone menu select the ringtone .
ly connected devices.
› Select the ringtone.
The telephone is connected as an additional tele-
phone.
Number for the voice mailbox
› For setting the voice mailbox number in the
Or:
phone
menu Mailbox number: .
› If two telephones are connected to the Infotain-
› Enter the voice mailbox number.
ment, select the telephone to be replaced.
Turn the graphic notice regarding receiving a new
Manage preset buttons for preferred contacts
message/email on or off
When the feature is on, the new message icon ap-
pears on the status bar and in the feature area for
the messages when a new message/e-mail is re-
ceived.
› In the Telephone
menu New message notifications .
Simultaneous calls
This applies to some countries.
Depending on the connected telephone, it is possible
to answer the next incoming call and hold the previ-
› To save the desired preset button, hold A .
ous call.
› Select a contact from the displayed list.
› To switch on simultaneous calls, tap on telephone
› If the contact contains multiple telephone num-
Parallel talks.
bers, choose the desired telephone number.
› To display the menu for deletion, go to the phone
Wi-Fi
menu and tap on Manage favourites .
Functionality
› To delete one preset, tap on the list entry and con-
fiÙm the deletion.
The Wi-Fi can be used for the internet connection or
Or:
for the SmartLinkConnection.
› To delete all station buttons, tap Clear all and oÄfiÙm
The Infotainment hotspot can connect up to 8 mo-
the deletion.
bile devices. At the same time, the Infotainment can
be connected to another hotspot.
Import telephone contacts
After fiÙst connecting the main telephone with Info-
› To display the list of connected mobile devices, tap
tainment, telephone contacts will start to be impor-
Wi-Fi Infotainment system as hotspot Connected devi-
ted into the Infotainment memory.
ces.
Infotainment can import up to 5000 telephone con-
tacts together with contact pictures. Each contact
can include max. 5 telephone numbers.
Infotainment Amundsen › Wi-Fi 107
Overview of available hotspots
The password for connecting to the Infotainment
hotspot is taken from the menu item
Wi-
Display available hotspots
Fi Infotainment system as hotspot Network key.
› Tap
Wi-Fi Wi-Fi:.
› oÄfiÙm the connection.
Connect Infotainment to the mobile device hot-
spot
›
Turn on the Infotainment’s Wi-Fi unit in the menu
item
Wi-Fi WLAN: WiFi active switch on
› Select the desired hotspot in the list of available
hotspots.
› Enter the password for connecting to mobile devi-
ces.
Infotainment stores passwords for previously
connected hotspots.
A
Previously connected hotspots
B
Available hotspots
Security level of the Infotainment hotspot
The security level is set at WPA2 and cannot be
C
The hotspot supports the WPS connection
changed.
Currently connected hotspot
Activate/deactivate data transfer between the In-
Delete information about the hotspot connection
fotainment and the connected device
Wi-Fi signal strength of the hotspot
› To turn data transmission on or off, tap
Wi-Fi Infotainment system as hotspot Connected devices
The Wi-Fi signal from the hotspot is not available
Change the name of the Infotainment hotspot
▶ Tap
Wi-Fi Infotainment system as hotspot Network
Function restriction
name:.
▶ Enter the name and oÄfiÙm.
The Infotainment system can only be connected to a
hotspot with WPA2 access protection.
Change password for connection to Infotainment
hotspot
Restriction of the Wi-Fi connection
The password must be a minimum of 12 and a maxi-
In some countries, the Wi-Fi connection is restric-
mum of 63 characters.
ted for legal reasons. When crossing the border of
the country in question, the connection with a mo-
▶
Wi-Fi Infotainment system as a hotspot Network key .
bile device connected via Wi-Fi can be ended or
▶ Enter and oÄfiÙm the password.
restricted.
Quick connection of Infotainment to the mobile
Find out about ouÄtÙû-speifi legal restrictions.
device hotspot
If necessary, switch off the Wi-Fi manually.
› On the mobile device, turn on the hotspot, its visi-
bility, and the option for WPS connection.
›
Wi-Fi Wi-Fi: Tap WPS quick connection (WPS button).
Settings
Automatic WPS connection
Connect a mobile device to the Infotainment hot-
› Tap
Wi-Fi Quick connection to Infotainment system.
spot
› In the mobile device, switch on the option for con-
› Turn on the Infotainment’s Wi-Fi hotspot in the
nection via WPS.
menu item
Wi-Fi Infotainment system as hotspot
Use as hotspot.
› Wait for the connection to be established and, if
necessary, oÄfiÙm the respective messages.
› Turn on the Wi-Fi on the mobile device.
› In the list of available Wi-Fi devices, look for Info-
Manual WPS connection
tainment Wi-Fi.
› In the mobile device, switch on the option for con-
nection via WPS PIN.
The name of the Infotainment is taken from the
menu item
Wi-Fi Infotainment system as hotspot
The mobile device display will show the WPS PIN
Network name:.
for connecting to the Infotainment.
› Select the Infotainment hotspot and enter the re-
› Tap
Wi-Fi Quick connection to Infotainment system
quired password.
WPS PIN.
› Enter the WPS PIN in the Infotainment and con-
fiÙm.
108 Infotainment Amundsen › SmartLink
› Wait for the connection to be established and, if
necessary, oÄfiÙm the respective messages.
Automatic connection using the QR code
›
Wi-Fi Tap quick connection with infotainment system .
› In the mobile device, switch on the option for con-
nection via QR Code.
› With the mobile device, read the QR code dis-
played on the Infotainment screen.
› Wait for the connection to be established and, if
necessary, oÄfiÙm the respective messages.
A
Previously connected device
Tips for a perfect connection
B
Currently connection device
Display information about SmartLink
▶ Keep only the hotspot to be connected switched
Disconnection of the active connection
on and switch off the other hotspots.
Disconnection of the active connection
▶ Delete unused hotspots. This shortens the time re-
quired to establish a connection.
Settings in SmartLink menu
▶ For some hotspots, the connection takes longer, so
wait for the connection to fiÄish.
Android Auto
▶ If the connection is interrupted, recheck the availa-
ble hotspots and repeat the connection.
SmartLink
Functionality
SmartLink offeÙs the ability to display and operate
eÙtified applications from a connected mobile de-
vice in the Infotainment screen.
Overview of running applications, phone calls, in-
eÙtifiatioÄ may be conditional upon the use of the
coming text messages, and more.
latest update to the particular SmartLink application.
Turn on voice control (Google Voice)
Applications include, for example, apps for route
guidance, telephoning, listening to music, etc.
Apple CarPlay
Mobile devices can be connected via a USB cable or
WiFi.
Supported connection types
SmartLink supports the following connection types:
▶ Android Auto
▶ Apple CarPlay
▶ MirrorLink
Overview of the SmartLink connection
A
List of available applications
B
Depending on the duration of operation:
Menu SmartLink
▶ Tap: Return to the menu Apple CarPlay
› Tap
▶ Hold: Turn on voice control (Siri)
Infotainment Amundsen › SmartLink 109
MirrorLink
Conditions for MirrorLink
✓ The device to be connected must have MirrorLink
connection.
A list of devices and applications that support the
MirrorLink connection can be found on the web-
sites of Car Connectivity Consorcium®.
✓ The MirrorLink application needs to be installed
on the mobile device.
✓ Some applications require the data connection in
the connected mobile device to be turned on.
It is not possible to operate the application while
driving
Operation
Return to the menu SmartLink
Operation of the running MirrorLink application
List of running applications
Display of control surfaces at the bottom
Display of the last running application in connec-
Display of control surfaces at the top
ted mobile devices
Return to the menu MirrorLink
Settings
Restriction
Connection conditions
Restriction of the Wi-Fi connection
In some countries, the Wi-Fi connection is restric-
General connection conditions
ted for legal reasons. When crossing the border of
✓ The mobile device supports the type of Smar-
the country in question, the connection with a mo-
tLink connection Android Auto, Apple CarPlay or
bile device connected via Wi-Fi can be ended or
MirrorLink.
restricted.
✓ Mobile devices, as well as the type of SmartLink
Find out about ouÄtÙû-speifi legal restrictions.
connection, are supported in the respective mar-
ket.
If necessary, switch off the Wi-Fi manually.
✓ Some connected mobile devices require the mo-
Restriction of SmartLink applications while driving
bile device to be “unlocked”.
For reasons of safety, the operation of some Smar-
tLink applications while driving is not possible or only
Conditions for Android Auto
limited.
✓ The device to be connected must have Android
Auto connection.
Restriction of the navigation function
A list of devices, supported regions and applica-
If route guidance is currently being carried out
tions that support the Android Auto connection
through Infotainment, this is ended when you start
can be found on the Google, Inc. website.
route guidance in the Apple CarPlay application.
✓ The Android Auto application needs to be instal-
If there is route guidance in the Apple CarPlay appli-
led on the mobile device.
cation, it is ended by starting the destination guid-
✓ Some applications require the data connection in
ance using Infotainment.
the mobile device to be turned on.
✓ Connect the mobile device for the fiÙst time
SmartLink settings
when the vehicle is stationary.
Apple CarPlay - Connection via USB
Conditions for Apple CarPlay
✓ The device to be connected must have Apple
› Turn on the Infotainment.
CarPlay connection.
› Turn on the mobile device.
A list of devices, supported regions and applica-
› Connect the mobile device to the front USB input
using a cable.
tions that support the Apple CarPlay connection
can be found on the Apple Inc website.
› Choose to connect via Apple CarPlay.
✓ Siri voice control is on.
Apple CarPlay - Connection via Wi-Fi from Info-
✓ The data connection in the mobile device is
tainment
switched on.
› Turn on Bluetooth® and Bluetooth® visibility in the
Apple mobile device.
› Tap on
Manage mobile devices.
110 Infotainment Amundsen › Navigation
› In the displayed list, look for and select the desired
✓ The minimum Android version is 5.
device with the symbol
✓ No other mobile device can be connected via
› Follow the instructions on the Infotainment screen
SmartLink.
and oÄfiÙm the Bluetooth® pairing.
✓ Wi-Fi and Bluetooth® functionality is switched on
› If another device is connected to the Infotainment,
in the Infotainment system.
select the device to be replaced.
› Find available Bluetooth® devices on the phone.
Apple CarPlay - Connect via Wi-Fi from mobile de-
› Select the Infotainment Bluetooth® unit.
vices
› If necessary, oÄfiÙm the PIN.
To establish a connection, the following conditions
› In the Infotainment screen, select the connection
must be met:
type Android Auto.
✓ The minimum iOS version is 9.
Android Auto - Disconnect
✓ No other mobile device can be connected via
› In the Android Auto
menu, tap “Return to SKO-
SmartLink.
DA”.
✓ Wi-Fi and Bluetooth® functionality is switched on
› Tap on
in the Infotainment system.
MirrorLink - Connection via USB
› In the mobile device, turn on the CarPlay function.
› Turn on the Infotainment.
› Press and hold the
button on the multifunction
› Turn on the mobile device.
steering wheel.
›
Connect the mobile device to the front USB input
The Infotainment screen displays a connection
using a cable.
message with the name of the Bluetooth® unit of
› Choose to connect through MirrorLink.
the Infotainment.
› Find available Bluetooth® devices on the phone.
MirrorLink - Disconnect
› In the MirrorLink menu, tap on
› Select the Infotainment Bluetooth® unit.
› Tap on
› If necessary, oÄfiÙm the PIN.
› In the Infotainment screen, select the connection
Change to another device / connection type
type Apple CarPlay.
Infotainment allows you to switch between currently
connected devices and the connection type.
Apple CarPlay - Disconnect
› In the Apple CarPlay menu, tap on the function
› Tap on
area “ŠKODA”.
› Select the desired device or connection type.
› Tap on
Android Auto - Connection via USB
Navigation
› Turn on the Infotainment.
› Turn on the mobile device.
Navigation announcements
› Connect the mobile device to the front USB input
Infotainment route guidance takes place using
using a cable.
graphic driving recommendations and navigation an-
› Choose to connect via Android Auto.
nouncements.
Android Auto - Connection via Wi-Fi from Info-
The navigation announcements are generated by the
tainment
Infotainment system. Navigation announcement
› Tap on
mobile devices.
clarity (e.g. road or city name) cannot always be
› Select the desired device from the list of available
guaranteed.
devices.
Repeat the last navigation announcement
› Select the Bluetooth®hands-free pÙofile.
› Tap on
› oÄfiÙm the PIN; enter it if necessary and then
oÄfiÙm.
Turn off navigation announcements
› Tap on
› If another device is connected to the Infotainment,
select the device to be replaced.
› From the list of known devices, select the desired
Navigation overviews
device with the symbol.
Display menu
Android Auto - Connect via Wi-Fi from mobile de-
› Tap
vices
To establish a connection, the following conditions
must be met:
Infotainment Amundsen › Navigation 111
Map overview
A
Input line
A
Vehicle position
B
List of recently searched destinations
B
Route
C
POI categories
C
Route view
› Tap: search for the selected category
End route guidance
Show destination list
D
Display the destination input and route view
Enter destination via address / fiÄd destination
menu
Select the destination you are looking for
E
TÙaffi obstruction
› Enter the details for the destination search.
F
Following driving recommendation
› Select the desired destination.
G
POI
Destination details are displayed with the option of
starting route guidance.
H
Change map orientation
▶ North-facing 2D map
Selecting the destination entered via the address
▶ 2D map facing the direction of travel
› Tap on
▶ 3D map facing the direction of travel
A menu for entering the destination via the ad-
I
Road signs for the affeted route section
dress is displayed.
› Enter the required information.
Find destination
Destination details are displayed with the option of
Centre the map on the vehicle position
starting route guidance.
Display the settings menu
List of stored destinations
Turn off navigation announcements
› Tap on
Repeat the last navigation announcement
J
Display map in accordance with the following
setting
▶ Auto - Map in day / night mode depending on the
vehicle lighting currently switched on
▶ Day - Map in day mode
▶ Night - Map in night mode
K
Display navigation in the digital instrument clus-
ter
L
End route guidance
A
List of stored destinations
Show the entire route
B
Select category of stored destinations
Settings
▶
- Favourites
Map display in the digital instrument cluster
▶
- Last destinations
The map can be displayed in the digital instrument
▶
- Telephone contact destinations
cluster or on the Infotainment display.
Selecting the stored destination
› To change the display tap
in the Navigation
› Select the category of stored destinations.
menu.
›
Select the desired destination.
Find destination
Destination details are displayed with the option of
› Tap
starting route guidance.
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст