Skoda Superb (2021 year). Manual in english — page 2

Doors, windows and boot lid › Doors

Electrically operated child lock

Doors, windows and boot lid

› Press the left button to

Doors

switch oÄ/off the child

lock in the left rear

Opening/closing the door

door.

Opening from the outside

› Press the right button

to switch oÄ/off the

› Unlock the vehicle and

pull on the door handle.

child lock in the right

rear door.

The fact that the child

lock is switched on can

be seen by the illuminated displayed in the button.

After switching on the child lock the electric window

is also blocked in the respective door.

Opening from the inside

Window - with electrical operation

› Pull the door opening

What you should be mindful of

lever and push the

door away from you.

Force limiter

To reduce the risk of pinch injuries when closing the

windows, the vehicle has a force limiter.

If there is an obstacle, the window closing process is

stopped and the pane retracts by several centime-

tres.

If the obstacle prevents it from being closed for the

next 10 seconds, the closing process is interrupted

Closing from the inside

once again and the window goes down by several

› Grasp the pull handle and close the door.

centimetres.

If you attempt to close the window again within

10 seconds of the window being moved down for

Child safety lock on the rear doors

the second time, even though the obstacle was not

Operation

yet been removed, the closing process is only stop-

ped. During this time, it is not possible to automati-

The child lock prevents the rear doors from being

cally close the windows by pulling the button all the

opened from the inside.

way. The force limiter is, however, switched on.

Switching on and off

The force limiter is only not operational if you at-

tempt to close the window again within the next

10 seconds - the window will now close with full

force! If you wait longer than 10 seconds, the force

limiter is switched on again.

CAUTION

Risk of injury!

▶ Close the windows carefully, even though they

have a force limiter.

› Turn the child lock with the vehicle key or a Ĕat-

head screwdriver.

A Child lock switched off

B Child lock switched on

Doors, windows and boot lid › Window - with electrical operation

Overview of the operating buttons on the

Open all of the windows at the same time

driver's door

› Press and hold the button on the key.

Or:

› Turn off the ignition, open the driver's door, and

hold down the driver's window button until it

stops.

Close all of the windows at the same time

›

Press and hold the button on the key.

Or:

› Turn off the ignition, open the driver's door, and

pull upwards on the driver's window button until it

stops.

Depending upon vehicle equipment:

Or:

Front left window

› For vehicles with a keyless locking system, hold

Front right window

one fiÄ£er on the sensor on the outside of the han-

Rear left window

dle on the front door.

Rear right window

Deactivation/activation of the buttons in the

Settings

rear doors

The window operation is set in the following menu in

Deactivation/activation of the key in the left rear

the Infotainment system:

door (part of the child safety lock with electric

operation) » page 28, Operation

Menu item for window operation

Deactivation/activation of the key in the right

Or:

back door (part of the child safety lock with

Menu item for window operation

electric operation) » page 28, Operation

Troubleshooting

Operation

The window regulator has stopped working after

When the windows are open, irritating noises

repeated opening and closing

may occur at certain speeds.

The window regulator mechanism could have over-

Opening

heated.

› Press the corresponding button slightly down-

› Allow the window regulator mechanism to cool

wards and hold it until the window has reached the

down.

desired position.

The window operation does not work after discon-

Or:

necting the 12 volt vehicle battery

› Press the corresponding button until it stops; the

› Enable window operation » page 29.

window opens automatically. Pressing the button

again will stop the opening process.

Activation after disconnecting the 12-volt

Closing

vehicle battery

› To close, pull gently upwards on the top edge of

the corresponding button and hold until the win-

Activate automatic window operation

dow has reached the desired position.

› Turn on the ignition.

Or:

› Pull the corresponding button upwards and the

window closes.

› Pull the corresponding button until it stops; the

› Release the button.

window closes automatically. By pressing the but-

ton again, the closing process is stopped.

› Pull up the respective button and hold for 1 sec-

ond.

After switching off the ignition, the windows can

still open and close for about 10 minutes so long as

none of the doors are opened.

Doors, windows and boot lid › Sliding/tilting roof

Sliding/tilting roof

After moving the switch to the position B the

sliding/tilting roof is in the low-noise position (at a

What you should be mindful of

speed of about 80 km/h).

After another movement to position B the sliding/

To reduce the risk of pinch injuries when closing the

tilting roof opens completely.

tilt/slide sunroof, the vehicle has a force limiter.

After switching off the ignition, the sliding / tilt-

If the switch is held in the closed position and the

ing roof can be operated for about 10 minutes as

closing process is hindered by an obstacle, the

movement of the glass pane is stopped and the pane

long as none of the doors are opened.

moves back a few centimetres.

Comfort operation of the tilting/sliding sunroof

If the obstacle is not removed, the power limit is de-

The comfort operation makes it possible to lock the

activated when the switch is held again when the

sliding/tilting roof with the key if necessary.

door is closed again (if the time span between the

› Press and hold the button to turn it off.

closing attempts is less than 5 s). The sliding/tilting

› Press and hold the button to close it.

roof will then close with full force.

On vehicles with a keyless locking system, it is possi-

CAUTION

ble to close the sliding/tilting roof via the sensor in

Risk of injury!

the door handle of the front door.

▶ Close the sliding/tilting roof carefully, even though

› Hold one fiÄ£er on the sensor on the outside of the

there is a force limiter.

handle on the front door » page 26.

NOTICE

▶ During winter time, if necessary, remove any ice

and snow around the area of the sliding/tilting roof

Troubleshooting

before opening.

Operation of the sliding/tilting sunroof does not

▶ Always close the sliding/tilting roof before discon-

work after disconnecting the 12-volt vehicle bat-

necting the 12 volt vehicle battery.

tery

› Activating operation of the sliding/tilting sun-

roof » page 30.

Operating conditions

✓ Ignition is switched on.

Activation after disconnecting the 12-volt

✓ The outside temperature is higher than -20 °C

(applicable for the opening of the sliding/tilting

vehicle battery

roof).

Activating operation of the sliding/tilting sunroof

Operation

Gradual opening

Complete opening

Gradually reset

Fully reset

› Turn on the ignition.

› Pull the switch all the way down and hold it down.

After about 10 secs, the sliding/tilting roof opens

Gradual opening

and closes again.

Full opening

› Release the switch.

Gradual closing

Complete closing

Doors, windows and boot lid › Sunblind - with manual operation

Sunblind - with manual operation

Rolling up

›

Remove the sun protection blind from the holders

Operation

at the handle and let it roll in slowly.

› Pull the handle in the

appropriate direction.

Sun protection roller blinds for the rear

door panes

Operation

Sunblind - with electrical operation

Operation

Opening

Closing

Brightness protection

› Pull out the sun protection blind by the handle and

› Press or hold the but-

hang it into the holder A .

ton to move the roller

blind.

Rolling up

› Press or release the

› Remove the sun protection blind from the holder

button to stop the roll-

at the handle and let it roll in slowly.

er blind from moving.

Sun visors

Folding up and folding down

Activation after disconnecting the 12-volt

vehicle battery

› Turn on the ignition.

› Keep the button pressed down. The sunblind

opens and closes again.

› Release the button.

Sunblind for the rear window

Operation

Swivel the front visor towards the windscreen

Swivel the visor towards the door

CAUTION

Objects attached to the sun visors can restrict the

view to the outside.

In the event of sudden braking or an impact, these

can also cause injuries.

▶ Do not attach anything to the sun visor.

Brightness protection

› Pull out the sun protection blind by the handle and

hang it into the holders A .

Doors, windows and boot lid › Boot lid - with manual operation

Boot lid - with manual operation

NOTICE

▶ Do not manually close the tailgate when moving.

Operation

▶ Before operating the tailgate, check that there are

no objects in the swivel area that could damage the

Opening

tailgate. Also check that there are no objects with-

› Press the handle and

in the immediate vicinity of the vehicle that could

lift the lid.

damage the vehicle interior and the transported

objects.

If the tailgate hits an obstacle when closing, it

stops and an audible signal sounds.

When automatically closing the tailgate, e.g. un-

der the weight of snow, a broken beep sounds.

The rear parking light ĔashiÄ£ twice indicates

that the Ĕap is closed.

The option to open by pressing the handle is deacti-

Handle in the tailgate

vated once a speed of 5 km/h is reached. This is acti-

vated again after the vehicle has stopped and a door

› Press the handle to

open, close or stop the

is opened.

movement of the tail-

Closing

gate.

› Grasp the fixture A

The option to open by

and pull the lid down.

pressing the handle is

deactivated once a

speed of 5 km/h is

reached. This is activated

again after the vehicle

has stopped and a door

is opened.

Button in the tailgate

› Press the button to

CAUTION

open, close or stop the

Danger of opening the tailgate while driving!

movement of the tail-

▶ Make sure that the latch engages after the Ĕap is

gate.

closed.

Set a delayed lid lock

If the lid is unlocked with the

button on the key,

the lid is automatically locked again after closing.

The period after which the lid is locked automatically

Button in the centre console

can be extended by a specialist garage.

› To open the tailgate,

hold the button until

the tailgate starts to

Boot lid - with electrical control

open.

Operation

› Press the button to

stop the tailgate from

CAUTION

moving.

Risk of injury!

▶ Only operate the tailgate when there is nobody or

no objects in the swivel area.

CAUTION

Danger of opening the tailgate while driving!

▶ Make sure that the latch engages after the Ĕap is

closed.

Doors, windows and boot lid › Electrically operated contactless boot lid

Button on the key

✓ No trailer or other accessory is connected to the

trailer socket.

› Press the

button to

open, close or stop the

movement of the tail-

Operation

gate.

The option to lock exists

Opening/closing the lid

only on vehicles with a

keyless locking system.

The key must not be in

the vehicle and must be

at a distance of max. 2 m

from the tailgate.

The tailgate can also be closed by pulling it brieĔû

downwards.

Settings

› Stand in the middle behind the bumper.

Set the uppermost position of the tailgate and

› Move one foot quickly under the bumper and re-

move it again.

store it

It makes sense to set the top position of the tailgate,

If the lid doesn’t move, wait a few seconds and re-

e.g. setting for the opening of the tailgate in a limited

peat the swing motion.

space due to the garage height.

Display of the opening/ closing process

› Stop the tailgate in the desired position.

The rear turn signal lights light up when the lid is

› Press the button and hold down on the lower

opened and closed. When you close the lid, audible

edge of the tailgate until an audible signal sounds.

signals are additionally sounded.

Re-adjusting the top starting position of the tail-

Stopping/ restoring lid movement

gate

The lid movement can be stopped by a rapid swing-

› Carefully raise the tailgate manually to the limit.

ing motion with your foot. Lid movement is restored

› Press the button and hold down on the lower

by a subsequent swinging motion with your foot.

edge of the tailgate until an audible signal sounds.

Restriction

Troubleshooting

The system function may be restricted in the follow-

The tailgate does not react to the opening signal

ing cases:

› There is a possible obstacle, e.g. snow; remove it.

▶ Downpour

Or:

▶ Dirty rear bumper

› Press the handle in the tailgate and lift the lid.

Or:

Settings

› Mechanically unlock the Ĕap » page 34.

Activating and deactivating

The tailgate does not react to the closing signal

The function is activated and deactivated in the fol-

› Close the tailgate manually.

lowing menu in the Infotainment:

NOTICE

▶ Close the tailgate slowly, push down the tailgate

Or:

and push in the lock on the centre of the rear edge

of the tailgate.

We recommend that the function is deactivated in

the following cases:

Electrically operated contactless boot lid

▶ Installation of a roof rack

Operating conditions

▶ Coupling a trailer or another accessory to the hitch

▶ Car wash

✓ Ignition off.

✓ You have the vehicle key with you.

Doors, windows and boot lid › Unlocking the boot lid

▶

Maintenance and repair work in the back of the ve-

Seats, steering wheel and mirror

hicle

Front seat - with manual operation

Unlocking the boot lid

Controls on the seat

Release

If the boot lid does not open, it can be unlocked

manually by the following procedure.

Adjusting the seat in the longitudinal direction -

after releasing the operating lever, the lock must

audibly click into place

Adjusting the height

› Insert a screwdriver into the opening in the panel.

Adjusting the angle of the backrest - do not lean

› Release the tailgate by moving it in the direction of

against the backrest during adjustment

the arrow.

Adjusting the lumbar support: Extent of the cur-

vature

After a certain time, play can develop within the ad-

justment mechanism of the backrest angle.

Folding passenger seat backrest

Folding down

› Pull on the operating

lever.

› Fold the backrest for-

wards until it clicks in-

to place.

Folding back up

› Pull on the operating lever.

› Press the backrest backwards until it audibly clicks

into place.

Seats, steering wheel and mirror › Front seat - with electrical operation

Front seat - with electrical operation

Set the length of the seat manually

› Press the release han-

Controls on the seat

dle.

Adjusting the seat

› Push the front part of

the seat forwards or

Adjust in a longitudi-

backwards.

nal direction

Adjust the inclination

Adjusting the height

Memory function of the seat

Functionality

Adjusting the seat back

Adjust the inclination

Valid for vehicles with electrically adjustable driver's

seat.

Each of the memory buttons on the driver's seat can

be used to store and recall the set driver's seat and

exterior mirror position.

Depending on the equipment, the front passenger

seat may also have a memory function.

Operation

Adjusting the lumbar support

Retrieve stored position

Set the position of

› With the ignition off and the driver’s door open,

the curvature

press the desired memory button.

Set the extent of the

› In other instances, hold the button for example

curvature

with the ignition switched on or the driver's door

closed.

The passenger seat position can be retrieved in the

same way.

Stop position change

›

With the ignition off and the driver's door open,

Adjusting the passenger seat from the rear seats

press any button on the seat to be adjusted.

Adjusting the angle

Or:

of the seat backrest

›

Press the button on the key.

Adjusting a seat in a

forward/back direc-

› In other cases, release the held memory button.

tion

Seats, steering wheel and mirror › Seat massage function

Settings

CAUTION

▶ Only switch the function on and off when the vehi-

Storing driver's seat and exterior mirror position

cle is stationary.

for driving forwards

› Turn on the ignition.

Rear seats

› Adjust the seat and the

exterior mirrors.

Folding down the seat backs

› Press the button A

and within 10 seconds

Before folding down

one of the memory

› Insert the rear headrests as far as they will go or

buttons B .

remove them.

› Adjust the position of the front seats in such a way

Storing is oÄfirmed by

that they are not damaged by the folded-down

an acoustic signal.

seat backrests.

The seat position can be stored if the angle of in-

› For vehicles with a mesh partition, roll it into the

clination of the seat back relative to the seat surface

housing, then unlock the left seat backrest fol-

is less than approximately 110° and the seat is not in

lowed by the right seat backrest.

any of the end positions.

› Pull the outer seat belt to the side trim.

Save front passenger seat position

Folding forwards from the passenger compart-

Storing the passenger seat position is analogous to

ment

storing the driver's seat position.

› Press the release han-

Storing front passenger´s exterior mirror position

dle and fold the seat

for reversing

forwards.

› Turn on the ignition.

› Activate the folding function of the mirror in the

Infotainment in the following menu:

Or:

› Turn the exterior mirror knob to the position .

Folding forwards from the boot

› Engage reverse gear.

› Pull on the lever.

› Adjust the mirror to the desired position.

The seat back is un-

› Disengage reverse gear.

locked and partly fol-

The set mirror position is saved.

ded forwards.

When changing the stored seat and exterior mir-

ror position for forward driving, the passenger exte-

rior mirror position for reverse driving must be re-

stored.

Seat massage function

Folding back up

› Pull the outer seat belt

Turn on/turn off

to the side trim.

› Press the button.

› Fold the seat backrest

back up.

Function switches off

automatically after 10

The release handle must

minutes.

audibly click into place.

› Check that the seat

backrest has locked in

place. The pin A must

not be visible.

Seats, steering wheel and mirror › Folding the backrests forward from the luggage compartment

Folding the backrests forward from the

› Adjust the headrest to the initial pulled out posi-

tion.

luggage compartment

› Fold down the side bol-

sters on the head rest.

Removing and inserting the rear headrests

Park position of rear seat belts

Removing

› Partially fold the re-

spective seat back for-

wards.

› Move the headrest up

to the stop.

› Hold safety button A

and, at the same time,

push safety button B

into the opening with a

Ĕat-head screwdriver

and remove the headrest.

Headrests

Inserting

Adjusting the headrests

› Insert the headrest into the seat backrest.

The safety button must click into place.

Front headrests

› Hold the safety button

and move the headrest

Sleep package

in the desired direc-

tion.

The package includes

folding side bolsters for

the headrest and a bag

with a blanket.

Rear headrests

› Move the headrest in

the desired direction.

When pushing down,

press and hold the

safety button.

Folding side bolsters on the rear headrest

The folded down side bolsters reduce uncontrolled

sideways head movement , e.g. when sleeping.

Seats, steering wheel and mirror › Front armrest

Front armrest

Closing

›

Fold back the lid from the passenger compartment

Settings

until it clicks into place.

After closing, the red mark on the back of the cov-

Adjusting the height

er above the safety button must not be visible.

› Raise the backrest to

one of the locked posi-

WARNING

tions.

▶ The through-loading channel is only intended for

Folding down

transporting skis in a secured through-loading bag.

› Raise the backrest be-

yond the highest

locked position and

Steering wheel

fold it down again.

Buttons/dials on the multifunction steering

wheel

Rear armrest

Settings

› Fold down the armrest.

The folded-down arm-

rest can be used as a

storage table.

Switch voice control oÄ/off

Heated steering wheel » page 61

Rotate - Adjust the volume

Press - Switch the sound off/oÄ

Load-through device

Switch to the next track/station played

Open and close

Switch to the previous track/station played

Open from the passenger compartment

Show menu of assistance systems

Switching the Travel Assist assistance system

› Press the lid in the up-

per area and pull on

on / off » page 182

the handle.

Depending upon vehicle equipment:

› Open the lid.

▶ Operating an analogue instrument clus-

ter » page 62

▶ Operating a digital instrument clus-

ter » page 63

Depending upon vehicle equipment:

▶ Operating an analogue instrument clus-

ter » page 62

Open from the luggage compartment

▶ Operating a digital instrument clus-

› Press the store button.

ter » page 63

› Open the lid.

Depending upon vehicle equipment:

▶ Operating an analogue instrument clus-

ter » page 62

▶ Operating a digital instrument clus-

ter » page 63

Seats, steering wheel and mirror › Interior rear-view mirror

Setting the steering wheel position

After switching off the ignition, it is then no longer

possible to switch on the ignition, to lock the steer-

WARNING

ing and to switch on the electrical components.

Risk of an accident!

Ĕashes

▶ Do not adjust the steering wheel while driving.

Message regarding a fault in the steering lock

› Swing the safety lever

› You may continue driving, exercising appropriate

downwards.

caution. Seek the help of a specialist garage.

Steering column lock not unlocked

Ĕashes

Message concerning the required steering

wheel movement

› Adjust the steering

› Move the steering wheel slightly back and forth.

wheel to the desired

› If the steering does not unlock, stop the vehicle

position.

and seek the help of a specialist garage.

Interior rear-view mirror

› Press the safety lever

Operation

as far as it will go.

Interior mirror with manual darkening

Mirror is not dark-

ened

Mirror darkens

Troubleshooting

Power assisted steering faulty

Interior mirror with automatic darkening

illuminates - total failure of the power assisted

Darkening of the mirror is automatically controlled

steering, failure of steering assistance

through the sensors in the mirror once the engine is

› Turn off the ignition, start the engine and drive a

started.

few meters.

CAUTION

› If the indicator light

does not go out, do not

Risk of an accident!

continue driving. Seek the help of a specialist ga-

A glowing display e.g. a mobile phone or navigation

rage.

device may affet the function of the automatic mir-

ror darkening.

illuminates - partial failure of the power assis-

▶ Do not attach these devices close to the mirror.

ted steering, possible reduction in power

steering

› Turn off the ignition, start the engine and drive a

Wing mirror

few meters.

Operation

› If the indicator light

does not go out, you can

drive on, exercising appropriate caution. Seek the

Depending on the equipment, the mirrors can be fol-

help of a specialist garage.

ded in manually or electrically.

Steering column lock faulty

Ĕashes

Message regarding a fault in the steering col-

umn lock

› Stop the vehicle.

› Seek the help of a specialist garage.

Seats, steering wheel and mirror › Wing mirror

Positions of the rotary knob

WARNING

Risk of an accident!

Adjust the left-hand

The exterior mirrors make objects appear farther

exterior mirror

away.

Switch off operation

▶ Use the rear-view mirror to determine the distance

Adjust the right-

from vehicles behind.

hand exterior mirror

Fold mirror in elec-

NOTICE

trically (to fold back

Danger of mirror damage!

out, select a differ-

▶ If the electrically foldable mirror is swung out by

eÄt position)

external iÄĔueÄes (e.g. due to an impact during

manoeuvring), fold the mirror in using the rotary

Heat the mirror

knob and wait for an audible folding sound.

when the engine is running

Adjusting the mirror surface

› Select position or .

Settings

› Turn the rotary knob in the direction of the arrows.

Activation or deactivation of the automatic folding

Folding electrically folding mirrors automatically

of the exterior mirrors, the synchronous adjustment

If this function is activated, the mirrors are folded in

of the mirror surfaces as well as the lowering of the

when the vehicle is locked and folded back when it is

passenger-side mirror surface when reversing are

unlocked.

carried out in the Infotainment in the following

menu:

Locking of the vehicle is not indicated by the fact

that the mirrors fold in. Locking of the vehicle is indi-

cated by the turn signal lights ĔashiÄ£.

Or:

Manually foldable mirrors

› Fold the mirror towards the side window by apply-

ing pressure with your hand.

Troubleshooting

Setting the mirror surfaces synchronously

If this function is activated, the mirror surface of the

Electric mirror operation impaired

passenger mirror is also set when the mirror surface

› Adjust the mirror surface by pressing it lightly with

of the driver's mirror is set.

your fiÄ£er.

Mirror with memory function

CAUTION

Valid for vehicles with electrically adjustable driver's

Risk of burns!

seat.

▶ Do not touch heated exterior mirror surfaces.

The current setting for the exterior mirror surfaces

can be stored in the memory of the driver's

seat » page 36 or the remote key » page 24.

Lower the passenger mirror surface when revers-

ing

Valid for vehicles with electrically adjustable driver's

seat.

The mirror surface of the passenger mirror takes in

the memory of the driver's seat » page 36 or the re-

mote key » page 24 stored position to improve visi-

bility when reversing.

Operating conditions

✓ The function can be activated in Infotainment.

✓ The mirror position is saved.

✓ The reverse gear is engaged.

✓ The adjustment knob is in the position.

The mirror automatically resumes the home position

when driving forward at speeds above 15 km/h or

after the ignition is switched off.

Restraint systems and airbags › Seat belts

illuminated - a front or rear seat belt is not fas-

Restraint systems and airbags

tened

Seat belts

lights up - rear seat not occupied

Functionality

illuminated - a rear seat belt is not fastened

Seat belts that are fastened correctly offer very

good protection in the event of an accident. They re-

illuminated - a rear seat belt is not fastened

duce the risk of an injury and increase the chance of

survival in the event of a major accident.

illuminated - a rear seat belt is fastened.

WARNING

▶ The seat belts must not be removed or altered in

illuminated - a rear seat belt is fastened.

any other way.

▶ If the driver's seat belt is damaged, stop driving.

illuminated - a rear seat belt is fastened.

▶ If another seat belt is damaged, the seat must not

be occupied.

▶ Do not repair damaged seat belts yourself.

Operation

▶ Have a damaged seat belt replaced immediately by

a specialist garage.

Fastening the seat belt

Automatic belt retractor

› Grasp the buckle latch

The automatic retractor locks the belt in the event

and slowly pull the belt

of a jerky pull on the belt. The belts lock, for example,

over the chest and pel-

when full braking, when the car accelerates, when

vis towards the buckle.

driving downhill and when cornering.

› Insert the buckle latch

WARNING

into the buckle until

▶ If the seat belt does not lock when pulled jerkily,

there is an audible

have the retractor checked by a specialist garage.

click.

› Pull on the belt to en-

Belt tensioners

sure that the buckle is

The safety of the driver, front passenger and passen-

securely fastened.

gers on the outer rear seats who are wearing their

seat belts is enhanced by the belt tensioners fitted

Unfastening the seat belt

to the inertia reels on the front and rear external seat

› Grasp the buckle latch

belts.

and release it by press-

If there is a collision with a certain severity, the seat

ing the red button.

belt is tightened by the belt tensioner so that unwan-

› Hold the belt so it does

ted body movement is prevented.

not twist when rolling

The belt tensioner can also be deployed when the

up.

seat belt is not fastened.

Belt tensioners are not activated in the event of a

roll-over, minor collisions or in accidents in which no

major forces are produced.

Smoke is released when the belt tensioner is de-

ployed. This does not indicate a vehicle fire.

Settings

Reversible belt tensioner

› Move the seat belt

Vehicles with a proactive occupant protection sys-

height adjuster up-

tem include reversible belt tensioners » page 185.

wards to increase the

height.

The reversible belt tensioners increase safety for the

belted driver and front passenger by automatically

tightening the seat belt tightly over the body in criti-

cal driving situations and then releasing it again.

Status display in the instrument cluster display

Depending on the type of display, the display can be

as follows:

Restraint systems and airbags › Child seat

› Press the safety button

tween the front seat and the child seat or the child

and move the seat belt

carried in the child seat.

height adjuster down

▶ Before installing a forward-facing child seat, adjust

to reduce the height.

the headrest so that it is as low as possible.

› After adjustment, firm-

▶ If the headrest prevents the child seat from being

lû pull on the belt to

fitted, adjust the headrest to the highest position.

ensure that the seat

▶ When installing the child seat, avoid contact be-

belt height adjuster has

tween the roof and the rear pillar. If the head air-

correctly locked in

bag is deployed, there is a risk of injury.

place and that the belt

▶ If using a separate child seat cushion, adjust the

is locked securely.

headrest so that the child's head is Ĕush with, but

not protruding above the height of the top edge of

the headrest.

Troubleshooting

Blocked belt retractor

Using a child seat on the front passenger seat

› Grasp the strap in the

middle and pull quickly.

When using a child seat on the passenger seat, any

ouÄtrû-speifi regulations must be observed.

› Hold the strap and let

it roll up slowly.

Never use a child seat in which the child is carried

› Pull on the strap to see

with his or her back to the direction of travel on a

if the retractor is

seat protected by an active airbag placed in front of

working properly.

the seat. This could cause serious injury to the child,

even death.

› If the strap is still

blocked, repeat the un-

This is also indicated by the following stickers:

locking procedure

once or twice.

› If the strap is still blocked, seek the help of a spe-

cialist garage.

Child seat

What you should be mindful of

For how to install and use the child seat, please note

Sticker on the passenger sun visor

instructions of the child seat manufacturer.

Sticker on the central body pillar on the passenger

For safety reasons, we always recommend that chil-

side

dren are transported on the back seats. Carry chil-

dren on the front passenger seat only in exceptional

The following instructions must be followed when

cases.

using a child seat on the front passenger seat:

Use child seats according to standard ECE-R 44 and

▶ It is essential to deactivate the front passenger air-

ECE-R 129 of the European Economic Commission.

bag if using a child seat in which the child is trans-

Child seats according to standard ECE-R 44 and

ported with its back facing the direction of trav-

ECE-R 129 are marked with the test symbol: large E

el » page 47.

in a circle, with the test number below.

▶ If possible, adjust the front passenger seat back-

We recommend using child seats from the ŠKODA

rest so that it is vertical, to ensure that there is se-

Original Accessories range. These child seats have

cure contact between the backrest and the child

been developed and tested for use in ŠKODA vehi-

seat.

cles. They satisfy the standard ECE-R 44 or ECE-R

▶ If possible, move the front passenger seat back-

129.

wards so that there is no contact between the

front passenger seat and the child seat behind it.

WARNING

▶ Adjust the height-adjustable front passenger seat

▶ When installing the child seat on the rear seat, ad-

as much as possible.

just the front seat so that there is no contact be-

▶ Set the front passenger seat belt as high up as pos-

sible.

Restraint systems and airbags › Fasteners for child seats

WARNING

without kinking and is not bent over the edge of

Risk of the seat belt causing a neck injury to the

the guide fittiÄ£.

transported child!

WARNING

▶ For child seats in groups 2 and 3, ensure that the

▶ As soon as the rear-facing child seat is no longer

guide fittiÄ£ attached to the child seat headrest is

being used on the front passenger seat, activate

positioned in front of or at the same height as the

the front passenger airbag again.

seat belt height adjuster on the central body pillar.

▶ Adjust the height of the front passenger seat belt

so that the belt passes through the guide fittiÄ£

Recommended child seats

Grouping of child seats according to standard ECE-R 44.

Group

Weight of the child

up to 10 kg

up to 13 kg

9-18 kg

15-25 kg

22-36 kg

Recommended child seats

Approval number

Group

Manufacturer

Type

Attachment

Order number

(E1 ...)

(up to 13

Britax Römer

Baby Safe Plus

Isofix base frame

1ST019907

04 301146

kg)

ISOFIX and TOP

Britax Römer

Duo Plus TT

DDA000006

04 301133

(9-18 kg)

TETHER

2-3

Britax Römer

Kidfix XP ^a)

ISOFIX

000019906K

04 301198

(15-36 kg)

Britax Römer

Kidfix II XP

ISOFIX

000019906L

04 301323

For optimum protection, especially in the event of a side impact, it is recommended that you use this child

seat complete with the backrest.

Fasteners for child seats

Use of child seats

Overview of usability of child seats according to standard ECE-R 16.

Restraint systems and airbags › Fasteners for child seats

Child seats with the ISOFIX system

Front passenger’s seat

Rear seats

Size category of

With deactiva-

Group

With activated

child seat ^a)

ted front airbag

Outer seats ^c)

Centre seat

front airbag ^b)

(up to 10 kg)

(up to 13 kg)

(9-18 kg)

IUF

(15-25 kg)

(22-36 kg)

The size category of the child seat is indicated on the child seat plate.

If the passenger seat is equipped with ISOFIX system holding eyelets, it is suitable for the installation of

an ISOFIX child seat with “Semi-Universal” approval.

The seat is suitable for the fixiÄ£ system ISO/R3.

IL The seat is suitable for the ISOFIX child seats with “Semi-Universal” approval.

IUF The seat is suitable for forward-facing child seats and is permitted for use in this weight category.

X The seat is not equipped with eyelets for the ISOFIX system.

i-Size

Front passenger’s seat

Rear seats

With activated front air-

With deactivated front

Outer seats

Centre seat

bag

airbag

i-U

i-UF The seat is suitable for forward- and backward-facing i-Size child seats of the “Universal” category.

X The seat is not suitable for i-Size child seats of the “Universal” category.

Restraint systems and airbags › Fasteners for child seats

Child seat fastened with a safety belt

Front passenger’s seat

Rear seats

Group

With activated front

With deactivated front

Outer seats

Centre seat ^a)

airbag

U ^b)

(up to 10 kg)

U ^b)

(up to 13 kg)

(9-18 kg)

(15-25 kg)

(22-36 kg)

It is forbidden to install a child seat with a support foot in the middle rear seat.

Adjust the height-adjustable front passenger seat as much as possible.

U The seat is suitable for the child seat category “Universal” and is permitted for use in this weight group.

UF The seat is suitable for forward-facing child seats in the “Universal”category and is permitted for use in this

weight group.

X The seat is not suitable for children in this weight group.

Overview

TOP TETHER

WARNING

ISOFIX

▶

Child seats with the TOP TETHER- Only use the

WARNING

system on the seats with the eyelets TOP TETH-

▶ On the retaining eyelets that are used to install the

ERSymbol are provided.

child seat with the ISOFIXSystem provided, do not

▶ Only attach one belt from the child seat to a lock-

attach any other child seats, belts or objects.

ing eye TOP TETHER-Fasten the system.

The ISOFIX system allows for the fast and secure in-

▶ When attaching the child seat with the TOP TETH-

stallation of the child seat. The eyelets for installing

ER- No other object may be attached to the eyelet

the child seat using the ISOFIX system are located

TOP TETHERSystem.

on the outer rear seats and possibly on the front pas-

senger seat.

A child seat that uses the ISOFIXsystem can only be

installed in the vehicle if it is approved for this vehi-

cle type. Further information can be obtained from a

ŠKODA partner or from a list of vehicles enclosed

with the child seat.

› Remove the covers be-

fore installing the child

seat.

Holding eyelets on the rear seats

The belt fastened into the TOP TETHER system re-

stricts the movement of the upper part of the child

seat. The holding eyelets for attaching the belt are

located on the outer rear seats A , as well as on the

middle rear seat B when necessary.

Restraint systems and airbags › Airbags

Airbags

Usage

The airbag system provides, as a supplement to the

seat belts, additional occupant protection during se-

vere frontal and side-on collisions.

The best possible protective effet of the airbag is

achieved only when the seat belt is also worn. The

airbag system is no substitute for the seat belts.

Front airbags

What you should be mindful of

Side airbags - front

Head airbags

Airbag systems can only properly protect if all occu-

pants have been secured and they are in the correct

Side airbags - rear

seating position.

Driver's knee airbag

No persons, animals or objects such as cup holders

or hangers for clothes may be in the deployment

WARNING

area of the airbags » page 46.

Danger of a functional restriction of the side airbags!

▶ Do not exert excessive forces, e.g. impacts, on the

▶ Do not cover or stick anything over the steering

seat backs.

wheel or the dash panel. The front airbags were

▶ Do not use seat covers that have not been ap-

not able to deploy.

proved by ŠKODA.

The front passenger airbag should be switched off in

▶ Have damaged seat covers at the installation loca-

some situations » page 47.

tion of the side airbags repaired by a specialist ga-

rage.

Functionality

Deactivating the airbags

We recommend having airbags other than the front

When sinking into the iÄĔated airbag, the forward

passenger airbag deactivated » page 47, Opera-

movement of the body is damped and the risk of in-

tionby a ŠKODA service partner.

jury is reduced.

Deactivation of the airbags should be considered in

As the airbags iÄĔate, smoke is released. This

cases such as the ones below:

does not indicate a vehicle fire.

▶ If the driver's seat adjustment is correct, the dis-

Airbag deployment in the event of an accident

tance of at least 25 cm between the centre of the

Airbag deployment is iÄĔueÄed by many factors.

steering wheel and the sternum cannot be main-

The deceleration rate at the time of impact is crucial.

tained.

WARNING

▶ Additional operating controls for a physically disad-

Danger of serious or fatal injuries!

vantaged driver are installed in the vehicle.

▶ Maintain the correct seating position.

▶ The vehicle has special seats, e.g. orthopaedic

▶ Do not keep your limbs in the deployment area of

seats without side airbags.

the airbags.

illuminates for 4 seconds after the ignition is

switched on and then Ĕashes for 12 seconds

In the following situations, no airbags are deployed:

- Airbag or belt tensioner deactivated with the diag-

▶ Minor frontal and side collisions

nostic device

▶ Rear-end collision

Message regarding the deactivated airbag or belt

▶ Vehicle rollover

tensioner

If the measured deceleration rate is below the refer-

WARNING

ence values programmed into the control unit, the

If an airbag is deactivated during the sale of the vehi-

airbags will not be deployed despite possible serious

cle, inform the buyer!

vehicle damage.

Requirements

Airbag overview

✓ Ignition on

The installation location of the airbags is marked

with the lettering

Restraint systems and airbags › Key switch for the front passenger airbag

Troubleshooting

› Close the storage compartment on the passenger's

side.

Airbag system faulty

› Turn on the ignition and check that the front pas-

illuminates

senger airbag indicator lights are lit up.

Message regarding an airbag fault

Warning lights

› Seek the help of a specialist garage.

▶ After switching on the igni-

tion, the two indicator lights

Key switch for the front passenger

light up brieĔû.

airbag

▶ If the system is OK, both of

the indicator lights go out.

Usage

▶ One of the indicator lights then lights up again de-

pending on the position of the key switch:

Deactivation of the front passenger airbag is provi-

ded for the following cases, for example:

lights up - front passenger airbag switched

off

▶ A rear-facing child seat is mounted on the front

passenger seat.

lights up 65 secs after the ignition is

▶ The minimum distance to the control panel cannot

switched on - passenger front airbag

be maintained.

switched on

What you should be mindful of

Troubleshooting

WARNING

Key switch for airbag deactivation is faulty

Danger of fault in the passenger airbag deactivation

Ĕashes together with

system!

The front passenger airbag will not be de-

▶ Only switch off the airbag when the ignition is

ployed in the event of an accident!

switched off.

› Have the airbag system checked by a specialist ga-

WARNING

rage immediately.

Danger of unexpected deployment of the passenger

airbags in an accident!

▶ After switching off the passenger airbag with the

key bit, do not leave the key bit inserted in the key

switch while driving. Shocks can cause the Key as-

signment to turn in the slot and trigger the airbag.

Operation

Before switching off/sõitchiÄg on the front pas-

senger airbag

› Remove the key bit.

Switch front passenger front airbag oÄ/off

› Switch off the ignition.

› Open the storage com-

partment on the pas-

senger's side.

› Insert the key bit into

the slot in the key

switch as far as it will

go.

› To Switch off, carefully

rotate the key switch

into the position

› To Switch on, carefully rotate the key switch into

the position

› Remove the key bit from the slot.

Lighting, windscreen wipers and washers › Exterior lighting

illuminates

Lighting, windscreen wipers and

› Switch on the light.

washers

Exterior lighting

Operation

Functionality

Switching off the

Unless otherwise stated, the light works when the

lights except the

ignition is switched on.

daytime running

Daylight running lights

lights

The daytime running lights illuminate the area in

Switching the low

front of the vehicle.

beam oÄ/off auto-

matically

In vehicles for certain markets, this also provides

Switching on the

lighting for the rear area of the vehicle.

parking lights

Operating conditions

Switching on the low

✓ The lights switch is in position

beam

Switching the low beam oÄ/off automatically

As the basic position of the light switch, use posi-

The low beam is automatically switched on or off de-

tion

pending on the lighting conditions.

High beam and headlight Ĕasher

Operating conditions

The high beam works when the low beam is on.

✓ The light switch is in the

position.

Switch on high beam

The automatic headlight circuit is indicated by the il-

lumination of the symbol

in the light switch.

Switch off main

beam / switch on

Switching low beam on automatically in rain

headlight Ĕasher

Operating conditions

✓ The light switch is in the

position.

When the main beam or

✓ The function is activated.

headlight Ĕasher is

✓ The windscreen wipers are switched on for lon-

switched on, the indica-

ger than 30 seconds.

tor lamp lights up in the instrument cluster

The automatic headlight circuit is indicated by the il-

CAUTION

lumination of the symbol

in the light switch.

Risk of an accident!

▶

Do not dazzle other road users with the high beam.

Full LED Headlights

When the light switch is in position

, the head-

Turn signal

lights provide the best possible beam of light in front

Switching on the

of the vehicle. The Dynamic cornering light function

turn signal light on

ensures the best possible illumination of the curve

the right - the warn-

area.

ing light Ĕashes in

CORNER function

the instrument clus-

The CORNER function is intended for turning or ma-

ter

noeuvring (e.g. when parking).

Switching on the

turn signal light on

The function illuminates the vicinity of the vehicle

the left - the warn-

front in the direction of travel.

ing light Ĕashes in

Operating conditions

the instrument clus-

✓ The turn signal is switched on or the front wheels

ter

are steered sharply.

Turn signal - convenience signalling

✓ The low beam is switched on.

Convenience signalling enables three Ĕashes of the

✓ The fog lights are not switched on.

turn signal lights without having to move the lever

✓ The driving speed is lower than 40 km/h.

up or down.

When no light is switched on

› Tap the control lever up or down.

The symbol in the light switch may also light up in

The corresponding turn signal lights Ĕash three

the instrument cluster, indicating that it is necessary

times.

to switch on the light.

Была ли эта страница вам полезна?

Да!Нет

Skoda Superb (2021 year). Manual in english — page 2

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.