Skoda Fabia (2021 year). Manual in english — page 4
Infotainment Amundsen › Infotainment overview
69
Functionality restriction of Infotainment with an
Infotainment Amundsen
MirrorLink connection
▶ For the duration of the connection, the external de-
Infotainment overview
vice cannot be used as an audio source in the Me-
dia menu.
▶ By connecting the device, all currently connected
Bluetooth® devices will be disconnected and the
device will automatically be connected as the main
telephone.
Depending on the device to be connected, a con-
nection oÄfirmatioÄ may be required.
Settings
Apple CarPlay - Connection via USB
› Turn on the Infotainment.
A
Touchscreen
› Turn on the mobile device.
› Connect the mobile device to the front USB input
Control dial left
using a cable.
▶ Press: Switch Infotainment oÄ/off
› Choose to connect via Apple CarPlay.
▶ Turn: Set volume
Apple CarPlay - Disconnect
Control dial right
› In the Apple CarPlay menu, tap on the function
▶ Press: oÄfirm menu item
area “ŠKODA”.
▶ Turn: select menu item/set value
› Tap on
Radio menu
Android Auto - Connection via USB
Media menu
› Turn on the Infotainment.
Phone menu
› Turn on the mobile device.
Voice control
› Connect the mobile device to the front USB input
using a cable.
Navigation menu
› Choose to connect via Android Auto.
Route guidance traffi reports
Android Auto - Disconnect
Information about vehicle settings
› In the Android Auto
menu, tap “Return to SKO-
Overview of Infotainment menus
DA”.
› Tap on
MirrorLink - Connection via USB
System
› Turn on the Infotainment.
Infotainment Menus
› Turn on the mobile device.
› Connect the mobile device to the front USB input
MENU menu
using a cable.
The MENU menu contains all available Infotainment
› Choose to connect through MirrorLink.
menus.
MirrorLink - Disconnect
› To Display the menu tap
› In the MirrorLink menu, tap on
The graphic display type for the MENU menu can be
› Tap on
set.
Change to another device / connection type
Infotainment allows you to switch between currently
connected devices and the connection type.
› Tap on
› Select the desired device or connection type.
70
Infotainment Amundsen › System
Depending on the equipment, the following ad-
vanced sound settings can be set
▶ Setting space optimisation
▶ Setting the audio profiles according to genre
▶ Adjusting the subwoofer volume
CoÄfiguratioÄ wizard
The oÄfi£uratioÄ wizard helps to set certain Info-
tainment functions.
Grid display
The oÄfi£uratioÄ wizard is automatically displayed if
the ignition is switched on and if there are at least
two menu items that have not been set after switch-
ing on the Infotainment or if a new user account has
been selected.
› To switch off the automatic display, when the
oÄfi£uratioÄ wizard is displayed tap Don't show again .
› For manual display, tap
CoÄfiguratioÄ wizard .
Set up menu MENU
The graphic display type for the MENU menu can be
List
set as follows:
Limitation
›
Screen Menu:
› Select one of the following menu items:
For safety reasons, operation of some Infotainment
▶ Grid display - Grid display.
functions while driving is not possible or is restricted.
▶ Horizont. Display - horizontal display.
The Infotainment system indicates this by means of
a message in the screen.
Safely disconnect the connected USB device
NOTICE
Risk of damage to the data on the connected device!
Basic settings
To safely disconnect/remove the device, proceed as
Setting basic functions
follows:
The following Infotainment functions are set in the
›
Remove safely: .
menu:
› Select the desired device.
› Disconnect/remove the device.
▶ Time and date
▶ Language
If it is not possible to safely disconnect the de-
▶ Units
vice, switch off the Infotainment and disconnect the
▶ Restore factory settings
device.
Sound settings
The Infotainment sound is set in the menu
Troubleshooting
The following menu items can be set:
Infotainment not responding
▶ Setting the equalizer
If the infotainment does not respond, restart it as
▶ Adjusting the volume ratio
follows:
▶ Volume adjustment of individual Infotainment
› Hold for longer than 10 s.
functions
› Wait for the restart to complete.
The volume can be adjusted on e.g. one of the fol-
lowing menu items:
System update
▶ Volume adjustment of voice commands
▶ Setting the maximum volume when Infotainment
We recommend having the system update carried
is turned on
out by a specialist company.
▶ Speed-dependent volume setting
The system update ensures optimal function of the
▶ Setting the Infotainment to mute with the park-
Infotainment system, e.g. compatibility with new
ing aid switched on
phones.
Infotainment Amundsen › Screen
71
Determine system version
Dragging up or down with two fiÄgers
› Tap
System information.
▶ Quickly review the list
Manual update
of phone contacts
Information about available updates can be found on
the ŠKODA website.
Pulling apart with two fiÄgers
▶ Enlarge image
› Check for available updates.
▶ Zoom into the map
› Save the update to a USB source.
› Insert the USB source into the front USB input.
›
Tap System information Tap Update software .
› Select the connected USB device as the update
source.
Pulling together with two fiÄgers
› Go to the update file and oÄfirm the update.
› oÄfirm any messages and wait for the update
▶ Minimize image
process to complete.
▶ Zoom out of the map
Screen
Overview
Turn two fiÄgers
▶ Rotate image
Finger movement
A
Status bar
▶ Move map
B
Bar with the functional surfaces of the displayed
menu
C
Other pages of the menu
Operation
NOTICE
Settings
Danger of screen damage!
The following basic screen functions are set in the
▶ The Infotainment screen is operated by touching it
menu
Screen:
lightly with your fiÄger.
▶ Brightness level of the screen
In principle, operation by touch is identical to the op-
▶ Switch off the screen
eration of a mobile phone.
▶
Display the time
The following operating modes are speifi to the In-
▶ oÄfirmatioÄ sounds and animations
fotainment system.
72
Infotainment Amundsen › Infotainment keyboard
Infotainment keyboard
Numeric keypad
Keypad overview
The arrangement of the keyboard characters de-
pends on the set infotainment language.
Depending on the context, the following types are
used in infotainment:
▶ Alphanumeric
▶ Numeric
▶ Keyboard for input
Keypad example
▶ Keyboard for search
A
Input line
▶ Delete characters before the cursor
▶ Tap: delete the last character
▶ Hold: delete all characters
B
Keypad functional surfaces
▶
oÄfirm the characters that have been entered
If context-sensitive, alphanumeric characters can
be entered by holding a functional surface with a
Keypad example
digit.
A
Input line
▶ Delete characters before the cursor
Operation
▶ Tap: delete the last character
The Infotainment keypad is used to enter characters,
▶ Hold: delete all characters in sequence
letters and numbers.
▶ Show list of searched entries
The keypad will be automatically displayed when In-
B
Keypad functional surfaces
fotainment prompts for characters.
▶ Change to lowercase
Find
▶ Switch to the first capital letter, followed by
During the character input, a search for correspond-
lowercase letters
ing entries takes place.
▶
/
Switch to the language keypad
The entry to be searched can be entered, including
▶
Switch to the numeric and character key-
diacritics.
pad
The keypad will only provide characters that match
▶ Show additional keypad languages
the stored entries.
▶ Insert a space
› To display the searched entries, tap
▶ Hold: Show additional character variants
Show additional keypad languages
▶ Move cursor to the left
To use the additional keypad languages, the desired
▶ Move cursor to the right
languages must be set first.
▶
oÄfirm the characters that have been en-
› Tap or repeatedly tap the Ĕa£ symbol until the
tered
desired language keypad is displayed.
Further character variants
› Press and hold the sign with the symbol
› Select the desired symbol.
Setting up additional keyboard languages
› Tap
Additional keypad languages.
Infotainment Amundsen › Voice control
73
Voice control
Stopping the played back message
›
Press the
button on the multifunction steering
Functionality
wheel.
Voice control principle
Ending voice control
Voice control works according to the principle of
› Press the
button on the multifunction steering
dialogue between the user and the Infotainment sys-
wheel twice.
tem.
Or:
The user says a voice command. The Infotainment
› Say the voice command “cancel” during voice com-
system responds or executes the voice command.
mand input.
Operating conditions
Restriction
✓ The ignition is switched on.
For some Infotainment languages, there is no voice
✓ Infotainment is switched on.
control available. The Infotainment system will indi-
✓ No telephone conversation can be held via Info-
cate this.
tainment.
The messages are generated by Infotainment. Flaw-
less clarity (e.g. road or city name) cannot always be
guaranteed.
Operation
You cannot use voice control while a phone call is in
Voice control process
progress.
› To turn on voice control, press the button
on
the multifunction steering wheel.
Settings
Or:
› Tap on
The following voice control functions are set in the
menu
Voice control:
After switching on, the icon is displayed.
▶ oÄfirmatioÄ tones
› Say a voice command.
▶ Display of sample commands
During recognition of the voice command, the icon
is displayed.
The Infotainment system then executes the voice
Self help
command or plays the message. During the message,
Starting acoustic help
the icon is displayed.
› If the Infotainment system is expecting a voice
After the execution of the voice command, voice
command, say “Help”.
control is switched off.
The “Help” voice command can be issued repeatedly
Correcting a voice command
for further tips on voice control.
› During voice command input, press the
button
Activate/deactivate the display of example voice
on the multifunction steering wheel and say a new
commands in the Infotainment screen.
voice command.
The system offers the option of displaying example
Stopping voice control
voice commands after switching on the voice con-
Stopping leaves more time for voice command input,
trol in the Infotainment screen.
e.g. for searching for a phone contact.
› To turn oÄ/off
voice control tap on Example
› Move your fiÄ£er up or down over the Infotain-
commands (Infotainment system).
ment screen.
Activate/deactivate display of example voice com-
Or:
mands in the instrument cluster display
› Say the “pause” voice command.
The system offers the option of displaying example
voice commands after switching on the voice con-
Resuming stopped voice control
trol in the Instrument cluster screen.
› Press the
button on the multifunction steering
› To turn oÄ/off
voice control tap on Example
wheel.
commands (Instrument cluster).
Or:
› Tap on in the Infotainment screen.
74
Infotainment Amundsen › Radio
Radio
Operation
Overview
Select station
Display menu
› Tap
Or:
› Tap
Analogue and digital radio reception
› Tap or at the top of the screen.
SCAN function
The function plays receivable stations of the selec-
ted frequency range in succession for a few seconds
each.
› To start automatic play press
Scan or the right
rotary control
A
Select frequency range
›
To end automatic play press or the right rotary
B
Depending on the frequency range
control
FM: Radio text
Find stations manually
DAB: Name of the station group
›
In the Radio main menu, tap
C
Station buttons for preferred stations
› To search in sequence, tap or next to the dis-
List of available stations
played frequency range scale.
Manual station search
Or:
Display information about the station (applies to
› Hold down the scroll mark on the frequency range
DAB)
scale and move it to the desired value.
Settings
Or:
Infotainment supports digital radio reception in
› Turn the right rotary control
DAB and DAB+ formats.
List of available stations
Limitation
› To display, tap
▶ Infotainment supports digital radio reception in
Played station
DAB and DAB+ formats.
Station stored on the presets
▶ Parking garages, tunnels, tall buildings or moun-
A traffi radio station is set
tains can restrict radio reception.
DAB signal is not available
The DAB station reception is not stable
▶ In the rear side windows, there may be antennas
To filter the FM stations into alphabetical order,
for receiving the radio signal.
tap according to group or genre.
Covering the windows with foils or metal-coated
The prerequisite for the filteriģ option is ensur-
stickers can impair the reception of the radio sig-
ing RDS and AF functions are activated.
nal.
Manual update of the station list
▶ The ŠKODA AUTO company does not assume any
In the FM station list, information about the pro-
responsibility for the availability, correct function
gramme type and the type of the regional station
or broadcast information of the RDS service.
can be displayed.
Settings
Save the station currently being listened to as a fa-
vourite from the Radio main menu
› Hold the desired station key for preferred stations
until the station is stored.
Infotainment Amundsen › Radio
75
Save station to favourites from the list of available
› To delete a logo, tap the desired preset button and
stations
oÄfirm the deletion.
Applies to AM, FM and DAB frequency ranges.
› To delete all logos Tap All and oÄfirm the deletion.
› Hold the line with the name of the desired station.
Activating / deactivating automatic station logo
› Tap the desired preset button.
assignment
Applies to the FM and DAB frequency ranges.
Deleting favourites
› In the menu Radio
clear memory .
When the function is switched on, a station logo
from the Infotainment memory is assigned when the
› To delete a station button for preferred stations,
station is stored on a preset.
tap the desired station button and oÄfirm the de-
letion.
› In the menu Radio
Advanced settings Automatic storage
station logos .
› To delete all station buttons for preferred stations
Tap All and oÄfirm the deletion.
Regional FM station logo
Applies to the FM frequency range.
Function surfaces
Applies to AM, FM and DAB frequency ranges.
Infotainment provides the option of using ouÄtrû-
speifi FM station logos.
The variant for changing stations using the function
surface in the Radio menu is set as follows:
› In the menu Radio
Advanced settings Region for station
logo: .
› In the menu Radio
Arrow buttons: .
› Choose country.
› Choose the change variant.
Turn oÄ/off radio text reception
Traffic reception (TP) for FM stations oÄ/off
Applies to the FM and DAB frequency ranges.
Applies to the FM frequency range.
When the function is switched on and station pre-
› In the menu Radio
Traffic program (TP) .
sets are displayed, detailed information about the
Switch traffic reception for DAB stations oÄ/off
broadcast content of the FM station being listened
Applies to the DAB frequency range.
to, or the name of the station group for the DAB sta-
tion, is displayed.
› In the Radio menu switch on the menu item
Traffic program (TP) switch on
› In the menu Radio
Radio text .
› In the menu Radio
Advanced settings Tap DAB traffic an-
Switch automatic frequency control (AF) oÄ/off
nouncements switch on / off
Applies to the FM frequency range.
Assign station logo from an external source
When the function is switched on and the signal of
Applies to AM, FM and DAB frequency ranges.
the FM station currently being listened to is weak,
Infotainment offers the option to assign logos from
Infotainment automatically sets the same station to
the pictures on an external source to the station but-
a differeÄt frequency with a better signal.
tons.
› In the menu Radio
Advanced settings Automatic frequen-
For station logos, images in jpg, gif, png, bmp format
cy change (AF) .
with a maximum resolution of 500x500 pixels can be
Automatic change of frequency to a regionally
used.
linked FM station
› In the menu Radio
Station logos .
Applies to the FM frequency range.
› Tap the desired preset button.
Infotainment provides the option of automatically
› Select the external source with the logo.
switching to a regionally linked FM station in case of
› Find the desired logo and oÄfirm.
signal loss of the FM station being listened to.
The information for updating station logos is taken
› In the menu Radio
Advanced settings RDS Regional: .
from the ŠKODA web pages.
› Select one of the following menu items:
▶ Fix - When the signal is lost, another station must
be set manually.
▶ Automatic - automatic selection of the station with
the best signal reception.
If reception is lost in the given region, Infotain-
Delete station logos
ment will automatically set another available region.
Applies to AM, FM and DAB frequency ranges.
Switch RDS oÄ/off
› In the menu Radio
Station logos .
Applies to the FM frequency range.
76
Infotainment Amundsen › Media
The menu item is only available for some countries.
When the function is switched on, the images broad-
cast by the station are displayed in the player.
› In the menu Radio
Advanced settings Radio Radio Data
System (RDS) .
› In the menu Radio
Advanced settings DAB slideshow .
If the RDS function is disabled, the following menu
items in FM station settings are not available:
Media
▶ Traffi program (TP)
▶ Radio text
What you should be mindful of
▶ RDS Regional
▶ Do not save any important data or that which has
▶ Automatic frequency change (AF)
not been backed up on the connected audio sour-
▶ Regional station logo.
ces. ŠKODA assumes no responsibility for lost or
damaged files or connected audio sources.
Switching additional announcements of the DAB
▶ When changing or connecting an audio source, this
transmitter on / off
may cause sudden changes in volume. Reduce the
Applies to the DAB frequency range.
volume before changing or connecting an audio
When the function is switched on, other announce-
source.
ments are received as traffi announcements. These
▶ When connecting an audio source, the source in-
include e.g. weather news, sports reports, fiÄaÄial
formation messages can be displayed. These mes-
news etc.
sages must be observed and, if necessary, con-
› In the menu Radio
Advanced settings Tap other DAB an-
firmed.
nouncements .
▶ The national copyright laws that apply in your
country must be observed.
Enable/disable automatic programme tracking of a
DAB station
Applies to the DAB frequency range.
Overview
When the function is switched on and the DAB sta-
tion is lost, Infotainment automatically changes to
Display menu
the same station with a better signal in a differeÄt
› Tap
DAB station group.
Or:
› In the menu Radio
Advanced settings DAB - DAB program
› Tap
tracking .
Turn oÄ/off automatic switching from a DAB sta-
tion to the same FM station
Applies to the DAB frequency range.
When the function is switched on and the DAB sta-
tion being listened to is lost, Infotainment automati-
cally changes to the same FM station. The symbol
(FM) is displayed after the station name.
When the corresponding DAB station can be re-
ceived again, the station automatically changes from
A
Select source
FM to DAB.
Manage files / multimedia database
› In the menu Radio
Advanced settings Tap Automatic
Settings
change DAB - FM .
Activating/deactivating reception of DAB trans-
mitter in the L band
In some countries, the DAB radio reception is only
available as a so-called Lband.
› In the menu Radio
Advanced settings L band .
If there is no DAB radio reception available in the
L-band in your country, we recommend turning the
L-band reception off. The DAB channel scan is there-
fore faster.
Switch the slideshow function oÄ/off
Applies to the DAB frequency range.
Infotainment Amundsen › Media
77
Operation
To safely disconnect/remove the device, proceed as
follows:
Operation - Basics
› In the Media menu tap on
Remove safely: .
› Select the desired device.
› Disconnect/remove the device.
If it is not possible to safely disconnect the de-
vice, switch off the Infotainment and disconnect the
device.
Bluetooth® player
Infotainment allows audio files of a connected Blue-
tooth® player to play using the A2DP and AVRCP au-
dio profile.
A
Album image / symbol of the connected source
With Infotainment, multiple devices can be paired
Tap: display available albums
using Bluetooth®, but only one of them can be used
Tap: start playback
as a Bluetooth® player.
Tap: pause
› For connecting the Bluetooth® player, pair and
Within 3 seconds of starting playback, tap: play
connect the device via Bluetooth®.
the previous song
› In the Media menu tap on
Bluetooth Paired devices .
After 3 seconds from the start of playback, tap
› In the list, choose the device with the symbol
to play the current title from the beginning
If a device is connected to Infotainment using
Hold: fast rewind within the title
Apple CarPlay or Android Auto, then it cannot be
connected using Bluetooth®.
Tap: play the next song
SD card
Hold: fast forward within the title
NOTICE
Movement within the title is also possible by drag-
Risk of damaging the SD card reader!
ging the fiģer over the timeline.
▶ Do not use SD cards with a broken slide for write
protection.
Extended operation
Turn repeat playback of the current track oÄ/off
› To insert the SD card,
Turn repeat playback of the current album/fold-
with the bevelled cor-
er oÄ/off
ner to the bottom,
Turn random playback of the current album/
push into the slot in
folder oÄ/off
the external module
until it snaps into place.
› To remove, first dis-
Restriction
connect the SD card
The availability of some media operation functions is
safely. For this in the
dependent on the connected source and the soft-
menu media tap on
ware being used, e.g. Bluetooth®.
Remove safely: and select
the SD card.
› Press on the inserted SD memory card.
Settings
The SD card moves to the eject position.
Turn title playback including subfolders oÄ/off
NOTICE
› In the Media menu tap on
Mix/Repeat including subfold-
When using an SD card with an adapter, vehicle vi-
ers. .
brations might cause the card to fall out of the
adapter.
Traffic
› To turn oÄ/off traffi monitoring during playback
USB device
of media files, go to the Media in the main menu
› To connect, insert the USB device into the appro-
and tap on Traffic program (TP) .
priate port.
Safely disconnect the connected device
To play audio files, use USB ports that support data
transfer.
NOTICE
Risk of damage to the data on the connected device!
78
Infotainment Amundsen › Media
› To disconnect disconnect the USB device first. For
✓ The ignition is switched on.
this in the menu media
tap on Remove safely: and
✓ The USB device allows charging.
select the USB device.
The charging effiieÄû can be differeÄt compared to
› Disconnect the USB device.
the charging from the usual mains power supply.
A USB device can be connected directly to the
Depending on the type of the connected USB device
USB port or via a connection cable.
and the frequency of use, the charging current may
We recommend using connection cables from the
not be suffiieÄt to charge the battery of the con-
ŠKODA Original Accessories range.
nected device.
USB extension cables or reducers may affet the
Some connected audio sources may not be recog-
playback function of the connected device.
nised and cannot be charged.
Load USB audio source
After connecting the USB device, charging will start
automatically when the following conditions are met:
Supported sources and files
Supported sources
Source
Interface
Type
SpeifiatioÄ
File system
SD
SD card
SD card reader
Standard size
SDHC
SDXC
USB stick
HDD
(without special soft-
FAT16
MSC
ware)
FAT32
USB devices that use
exFAT
the USB mass storage
USB 1.x; 2.x 3.x
NTFS
support protocol
USB
or higher with USB
Devices running the An-
2.x support
droid or Windows Phone
MTP
operating system that
support the Media
Transfer Protocol
Devices with an iOS op-
Apple
HFS+
erating system
Bluetooth® protocols
Bluetooth® player
Bluetooth®
-
A2DP and AVRCP (1.0 -
-
1.5)
The GPT standards (GUID partition table) method structured audio sources are not supported by Infotain-
ment.
Viewing images on the Infotainment screen is not supported by connected Apple devices.
Compatibility of mobile devices
It is possible to check the ŠKODAweb pages to see if Infotainment is compatible with the selected mobile
device being tested. This check is carried out by using the following reference or by reading the QR code:
All information given is incidental and serves as information.
The ŠKODA AUTO company cannot guarantee full functionality and compatibility, e.g. due to a software up-
date of the Infotainment and the mobile devices.
Infotainment Amundsen › Images
79
Supported audio files
Compression for-
Codec type
File exten-
Max. bit rate
Max. sam-
Multi channels
mat
sion
[kbps]
pling rate
[kHz]
Mono, dual mono,
MPEG 1 Layer 3
mp3
32 - 320
32, 44, 48
Stereo, Joint
Stereo
MPEG
MPEG 2 Layer 3
16, 22, 24
Mono,
mp3
8 - 160
Stereo, Joint
MPEG 2.5 Layer 3
8, 11, 12
Stereo
Windows Media
8 - 384
8, 11, 12, 16,
Audio 9 and 9.1
22, 32, 44,
Windows Media
Mono, stereo,
WMA
wma
8 - 320
48
Audio 9.2
Joint stereo
Windows Media
32, 44, 48,
8 - 768
Audio 10
96
8, 11, 12, 16,
defiÄed by the
22, 24, 32,
Mono, stereo,
FLAC
FLAC
Ĕa
format
44, 48, 64,
5.1, 7.1
Approx. 5.5 Mbps
88, 96
defiÄed by the
8, 11, 12, 16,
Mono,
OGG-Vorbis
OGC-Vorbis
ogg
format
22, 24, 32,
Stereo
Approx. 5.5 Mbps
44, 48
22, 24, 32,
AAC LC
44, 48
Mono,
ADTS
aac
16 - 400
AAC HE
16, 22, 24,
Stereo
AAC HEv2
32, 44, 48
8, 11, 12, 16,
Mono,
RIFF
WAV
wav
64 - 3072
22, 24, 32,
Stereo
44, 48, 96
Files that are protected by DRM- and iTunes® methods are not supported by Infotainment.
Supported playlists
Codec type
File extension
M3U
m3u
M3U8
m3u8
PLS
pls
WPL
wpl
ASX
asx
PLA
pls
Images
Overview
Display menu
› Tap
A
Select source
Manage files
Settings
80
Infotainment Amundsen › Images
Operation
▶ Increase the image size
Touch operation
▶ Reduce the image size
A
Look at images
▶ Show the next image
▶ Show the previous image
▶ Start slideshow
▶ Stop slideshow
B
View image
▶ Turn to the left
▶ Maximum image mag-
▶ Turn to the right
ÄifiatioÄ / display of
▶ Display in initial size
the initial image size
Guidance to GPS coordinates
The functional area is displayed if the image con-
tains information about GPS.
Gesture control
▶ Display of the next im-
age
Settings
The following Infotainment functions are set in the
menu:
▶ Display image size
▶ Display image duration during the slideshow
▶ Slideshow repeat
▶ Display the previous
image
Supported sources and files
Supported sources
Source
Interface
Speifia-
File system
tioÄ
Standard
size
SD card
SD card
SD
reader
SDHC
FAT16
SDXC
FAT32
USB 1.x; 2.x
USB stick
exFAT
3.x
HDD
NTFS
USB
or higher
(without
with USB
special
2.x support
software)
Infotainment Amundsen › Media Command
81
Supported files
The data transmission is switched oÄ/off in the
Codec type
File extension
Max. resolution
menu item
Data transfer mobile devices Activate
[Mpx]
data transfer for ŠKODA apps.
✓ Infotainment operation via the application is ena-
BMP
bmp
4
bled.
JPG; JPEG
jpg; jpeg
4 (Progressive
Mode)
Operation is set in menu item
. Data trans-
64
fer mobile devices Use apps to operate:.
GIF
gif
4
One of the following menu items can be selected:
PNG
png
4
▶ Deactivate - the operation is deactivated.
The maximum supported image size is 20 MB.
▶ CoÄfirm - operation requires oÄfirmatioÄ at the
start of the application.
▶ Allow - the operation requires no oÄfirmatioÄ.
Media Command
✓ The ŠKODA Media Command application is in-
Functionality
stalled in the tablet(s).
✓ The tablet(s) are connected to the Infotainment
The Media Commandfunction allows playback of au-
hotspot.
dio files or videos in up to two tablets that are con-
nected to Infotainment via Wi-Fi, to control Infotain-
ment.
Operation
start playback
Overview
› To select the playback source in the main menu,
tap and select the source tablet.
Display menu
› For playback select the category and then the title.
› Tap
If two tablets are connected, the title playback
starts in the two tablets at the same time.
Playback control
Tap: Start playback
Tap: Pause
Within 3 seconds of starting playback, tap:
play the previous song
After 3 seconds, tap from the start of play-
back: to play the current title from the beginning
Tap: play the next song
Menu for a tablet
Increase the audio volume of the tablet
Decrease the audio volume of the tablet
View control options for two tablets
View control options for a tablet
Mute the tablet
Unmute the tablet
Movement within the title is also possible by drag-
ging a fiģer over the timeline.
Functional limitation
Menu for two tablets
Some tablet types allow playback of audio files or
Choice of connected tablet
videos by an inserted SD card in the tablet. Playback
Settings
of these tracks may be limited.
If several devices are connected to the Infotainment
system by means of Wi-Fi, there is the danger of Wi-
Operating conditions
Fi overloading and thus also the inability of Media
Command to function properly.
✓ Data transfer of Infotainment is switched on.
82
Infotainment Amundsen › Mobile device management
Hi£h-defiÄitioÄ video playback may cause playback
› Turn on the Infotainment’s Wi-Fi hotspot in the
problems or problems connecting the tablets to the
menu item
Wi-Fi Mobile Hotspot Mobile Hotspot.
Infotainment system.
› Turn on Wi-Fi on the tablet.
› In the list of available Wi-Fi devices, look for Info-
tainment Wi-Fi.
Settings
The name of the Infotainment hotspot refers to
ŠKODA Media Command application
the menu item
Wi-Fi Mobile Hotspot Hotspot
The application can be downloaded to the mobile de-
Settings (Wi-Fi) SSID:.
vice after reading the following QR code or by refer-
› Select the Infotainment hotspot and enter the re-
ring to the ŠKODA mobile application website:
quired password.
The password for connecting to the Infotainment
hotspot is taken from the menu item
Wi-
Fi Mobile Hotspot Hotspot Settings (Wi-Fi) Network key:.
› oÄfirm the connection.
› In the tablet, start the application ŠKODA Media
Connect tablet with Infotainment hotspot
Command.
› Turn on the ignition.
Supported files
Format
Codec type
Android operating system
iOS operating system
MPEG-4 Part 2
Video
MPEG-4 Part 10 (H264)
Xvid
MPEG-1; 2 and 2.5 Layer 3 (mp3)
aac
(4,1+)
m4a
(4,1+)
Audio
ogg
Ĕa
wav
(4,1+)
Mobile device management
Overview
Mobile device management
› In the Telephone
menu Bluetooth Paired devices .
In the list of paired mobile devices, the following symbols may appear for the individual devices:
Grey icon - the device can be connected as a telephone.
Green icon - the device is connected as a telephone.
Grey icon - the device can be connected as a Bluetooth® player.
White icon - the device is connected as a Bluetooth® player.
Infotainment Amundsen › Mobile device management
83
Possible functions of the connected mobile device
The functions of a device connected via over the HFP Bluetooth profile depends on the following connection
types:
First device
Second device
Main phone
Additional phone
incoming / outgoing calls
SMS
incoming calls
Telephone contacts
Bluetooth® player
Bluetooth® player
With Infotainment only a mobile device can be connected as a Bluetooth® player.
Limitations of mobile devices and applications
Applications in mobile devices
Mobile devices can be used to install applications
Availability of features
that allow you to view additional information on the
The availability of certain features depends on the
Infotainment screen, or to operate the Infotainment
type of mobile device, as well as that of the applica-
system.
tions installed.
Due to the variety of applications, as well as their on-
Connection restrictions
going development, the available applications may
▶ With Infotainment, a max. of 20 mobile devices are
not function on all mobile devices. ŠKODA AUTO as-
paired.
sumes no liability for their proper functioning.
▶ The range of the connection of the mobile device
The scope of available applications and their func-
to Infotainment is limited to the passenger com-
tionality is dependent on the type of Infotainment, as
partment.
well as the vehicle and country.
▶ After reaching the maximum number, the pairing
Information about ŠKODAapplications
of the next mobile device will replace that of the
Detailed information about ŠKODA applications can
device that has not been used for the longest peri-
be found on the website after reading the following
od of time.
QR code or link:
Compatibility of mobile devices
It is possible to check the ŠKODAweb pages to see if
Infotainment is compatible with the selected mobile
device being tested. This check is carried out by us-
ing the following reference or by reading the QR
code:
Connection set-up
Connect a mobile device to Infotainment
› Turn on the ignition.
› Turn on the Bluetooth® on the mobile device.
All information given is incidental and serves as in-
› Turn on the Bluetooth® on Infotainment
formation.
Bluetooth
Bluetooth.
The ŠKODA AUTO company cannot guarantee full
› Turn on the Bluetooth® visibility of the Infotain-
functionality and compatibility, e.g. due to a software
ment
Bluetooth Visibility: Visible.
update of the Infotainment and the mobile devices.
› Find available Bluetooth® devices in the mobile de-
Bluetooth® compatibility of mobile devices
vice.
Due to the large number of mobile devices, it is not
› Select the Infotainment Bluetooth® unit.
possible to guarantee total Bluetooth® compatibility
The name of the unit can be found by tapping
with Infotainment. Bluetooth® compatibility depends
Bluetooth Name:.
on the Bluetooth® version as well as the implementa-
tion of Bluetooth® protocols by the manufacturer of
› oÄfirm the PIN; enter it if necessary and then
the mobile device.
oÄfirm.
84
Infotainment Amundsen › Telephone
The mobile device is connected to the Infotainment
› Tap
or just paired, depending on the number of devices
If the menu phone is not displayed, check wheth-
that are already connected.
er the mobile device is connected.
Connect Infotainment to a non-paired mobile de-
vice
› Turn on the ignition.
› Turn on the Bluetooth® on the mobile device.
› Turn on the Bluetooth® on Infotainment
Bluetooth Bluetooth.
› Tap on
Bluetooth Search for devices.
› Ensure the visibility of the device to be connected.
› Select the desired device from the list of Blue-
tooth® devices.
A
Name of the connected telephone
› oÄfirm the PIN; enter it if necessary and then
▶ Tap: Show list of previously connected phones
oÄfirm.
B
Preset buttons for preferred contacts
› If two devices are connected to the Infotainment,
select the device to be replaced.
C
Choice of storage group for the preferred con-
tacts
Connect Infotainment to a mobile device that is al-
ready paired
D
Name of telephone service providers
The connection with an already paired mobile device
▶ If the symbol is displayed in front of the name,
is made automatically after switching on the ignition;
roaming is active.
if necessary the device can be connected manually
E
Symbol for the connection type
as follows:
F
Status symbol of the phone
› Turn on the ignition.
Change the main phone to the extension tele-
› Turn on the Bluetooth® on the mobile device.
phone
› The infotainment Bluetooth®
Bluetooth
Bluetooth switch on
Enter the telephone number
›
Bluetooth Paired devices .
Contact list
› In the device list, select the desired device and the
Text messages
Bluetooth® profile.
Call lists
› oÄfirm the PIN; enter it if necessary and then
oÄfirm.
Settings
› If two devices are connected to the Infotainment,
select the device to be replaced.
Conditions for connecting a telephone with
Disconnect from a mobile device
Infotainment
› Tap
Bluetooth Paired devices.
› Tap on the Bluetooth® profile icon of the desired
✓ The ignition is switched on.
mobile device.
✓ The Bluetooth® function of the Infotainment and
the telephone needs to be switched on.
Delete a paired mobile device
› Tap
Bluetooth Paired devices.
The Bluetooth® function of the Infotainment is
switched on in the menu item
Bluetooth
› To delete a mobile device, tap and oÄfirm the
Bluetooth.
deletion.
✓ Visibility of the Infotainment is switched on.
› To delete all mobile devices, tap on Delete all and con-
firm the deletion.
The visibility of the Infotainment is switched on in
the menu item
Bluetooth Visibility:. Visible.
✓ The telephone is within signal range of the Info-
Telephone
tainment's Bluetooth® unit.
✓ The telephone is compatible with Infotainment.
Overview
✓ No mobile device is connected to the Infotain-
Display menu
ment using Apple CarPlay®.
› Tap
Or:
Infotainment Amundsen › T
elephone
85
Telephone operation
During an ongoing conference call, the following
functions can be selected depending on the context:
Enter telephone number
Hold the conference call and leave temporarily
› In the Phone menu, tap on .
(the conference will continue in the background)
› Enter the telephone number using the numeric
Return to the held conference call
keypad that is displayed.
/
Switch the microphone off / on
The displayed numeric keypad can also be used
End conference call
for searching for contacts.
Show details of the conference call
If, for example, the digits 32 are entered, contacts
In the details of the conference call, depending on
with the letter sequence DA, FA, EB etc. are dis-
the connected telephone, the following functions
played next to the numeric keypad.
can be selected:
List of telephone contacts
Show details of the conference call partici-
The list of telephone contacts is imported from the
pants
connected main telephone.
End conversation with the conference call par-
ticipant
› To display the contact list in the phone menu, tap
on
Conversation with a participant outside of the
conference call
› To search within the list, tap on Find .
› Enter the details you wish to fiÄd.
Send a text message
› In the Telephone
menu, tap New SMS .
› To establish a connection with a contact, tap the
functional area showing the desired contact.
› Write a text message and oÄfirm; a view of the
message is displayed.
If a contact has multiple telephone numbers, select
The message can be edited when the text area
the telephone number from the displayed list.
within the view is tapped.
› To display the details for a contact, tap .
› Consult or select the recipient of the message, if
Establish a connection to the voice mailbox num-
necessary tap to enter the phone number.
ber
› Add more recipients or oÄfirm selected recipi-
› In the Phone menu, tap on
ents.
Telephone conversation
› Tap on
Depending on the context of the telephone conver-
Display received text messages
sation, the following functions can be selected:
› In the Telephone
menu, tap Input .
End connection / reject incoming call / end call
› To display the Message, select the desired mes-
Answer an incoming call / return to the held call
sage.
/
Switch the ringer off / on
The message content and the following menu with
Hold a call
functions is displayed:
/
Switch the microphone off / on
Show details of the caller
Read the text message using the generated In-
fotainment voice.
Set up a conference call
Display the menu with the following func-
› To switch the call tone from the speakers to the
tions of an accepted message.
telephone, go to telephone in the menu and tap on
speakerphone .
Option to answer the message by means of a
template.
› To switch the call tone from the telephone to the
Delete message.
speakers, tap
Recognise phone numbers in the message.
Conference call
Forward message, with the option to edit the
A conference call is a joint telephone conversation
message before sending.
with a minimum of three and a maximum of six par-
Reply to the sender by sending a message.
ticipants.
› Make the next call during an ongoing conversation/
Settings for Infotainment telephone functions
conference.
Or:
Manage preset buttons for preferred contacts
› To save the desired preset button, press and hold.
› Accept a new incoming call by tapping
› Select a contact from the displayed list.
› To start a conference call, tap
› If the contact contains multiple telephone num-
bers, choose the desired telephone number.
86
Infotainment Amundsen › Wi-Fi
› To Clear in the telephone menu tap
User profile
The Infotainment hotspot can connect up to 8 mo-
Manage favourites .
bile devices. The Infotainment can be connected to
another hotspot simultaneously.
› To delete one preset, tap on the list entry and con-
firm the deletion.
Or:
Overview of available hotspots
› To delete all station buttons, tap Clear all and oÄfirm
Show available hotspots
the deletion.
›
Wi-Fi Wi-Fi .
Import telephone contacts
After first connecting the main telephone with Info-
tainment, telephone contacts will start to be impor-
ted into the Infotainment memory.
Infotainment can import up to 2000 telephone con-
tacts together with contact pictures. Each contact
can include max. 5 telephone numbers.
Depending on the type of telephone, import oÄfir-
matioÄ may be required.
Update telephone contacts
A
Previously connected hotspots
When re-connecting the telephone with Infotain-
B
Available hotspots
ment, an automatic update of the list is carried out.
C
The hotspot supports the WPS connection
› For manual update of the list in the phone
menu User profile tap on Import contacts .
D
Update the list of available hotspots
Currently connected hotspot
Show pictures on phone contacts
› In the Telephone
menu User profile View pictures for
Delete information about the hotspot connection
contacts .
Wi-Fi signal strength of the hotspot
Sort contacts in the phone book
The Wi-Fi signal from the hotspot is not available
› In the Telephone
menu User profile Sort by: .
› Select the type by which to sort.
Function restriction
Ringtone
Some phones do not allow the use of the telephone
The Infotainment system can only be connected to a
ringtone; instead, the Infotainment ringtone is used.
hotspot with WPA2 access protection.
› For setting the Infotainment ringtone in the
phone menu User profile select the ringtone .
Settings
› Select the ringtone.
Connect a mobile device to the Infotainment hot-
Voice mailbox number
spot
› For setting the voice mailbox number in the
phone
menu User profile Mailbox number: .
› Turn on the ignition.
› Turn on the Infotainment’s Wi-Fi hotspot in the
› Enter the voice mailbox number.
menu item
Wi-Fi Mobile Hotspot Mobile Hotspot.
Conference calls
› Turn on the Wi-Fi on the mobile device.
› To enable/disable the option for conference call
› In the list of available Wi-Fi devices, look for Info-
setup in the phone menu, tap
Conference call .
tainment Wi-Fi.
The name of the Infotainment hotspot refers to
Wi-Fi
the menu item
Wi-Fi Mobile Hotspot Hotspot
Settings (Wi-Fi) SSID:.
Functionality
› Select the Infotainment hotspot and enter the re-
quired password.
Wi-Fi can be used to connect to the Internet or for
operating the Infotainment system using an applica-
The password for connecting to the Infotainment
tion in the connected device (e.g. ŠKODA Media
hotspot is taken from the menu item
Wi-
Command).
Fi Mobile Hotspot Hotspot Settings (Wi-Fi) Network key:
› oÄfirm the connection.
Infotainment Amundsen › Data connection
87
Connect Infotainment to the mobile device hot-
› Turn on the Infotainment’s Wi-Fi unit in the menu
spot
item
Wi-Fi Wi-Fi: Wi-Fi.
› Turn on the ignition.
› Tap Manual settings.
› Turn on the Infotainment’s Wi-Fi unit in the menu
› Enter the name of the hotspot to connect to and
item
Wi-Fi Wi-Fi Wi-Fi switch on
the access password.
› Select the desired hotspot in the list of available
› Tap Connect.
hotspots.
› Wait for the connection to be established and, if
› Enter the password for connecting to mobile devi-
necessary, oÄfirm the respective messages.
ces.
Tips for a perfect connection
Infotainment stores passwords for previously
▶ Keep only the hotspot to be connected switched
connected hotspots.
on and switch off the other hotspots.
Security level of the Infotainment hotspot
▶ Delete unused hotspots. This shortens the time re-
The security level is set at WPA2 and cannot be
quired to establish a connection.
changed.
▶ For some hotspots, the connection takes longer, so
wait for the connection to fiÄish.
Change the name of the Infotainment hotspot
▶ If the connection is interrupted, recheck the availa-
› Tap
Wi-Fi Mobile Hotspot Hotspot Settings (Wi-Fi)
ble hotspots and repeat the connection.
SSID:.
› Enter the name and oÄfirm.
› Tap Save.
Data connection
Change password for connection to Infotainment
Settings
hotspot
The password must be a minimum of 8 and a maxi-
Mobile data
mum of 63 characters.
Mobile data for the data connection may be sub-
› Tap
Wi-Fi Mobile Hotspot Hotspot Settings (Wi-Fi)
ject to charges according to the mobile network
Network key:.
operator's tariff conditions.
› Enter the password and oÄfirm.
Types of data connection setup
› Tap Save.
▶ By connecting the Infotainment with the external
hotspot via Wi-Fi.
Quick connection of a mobile device to the Info-
tainment hotspot
▶ Using the USB device CarStick.
› Turn on the ignition.
Connecting using the USB device CarStick
› Turn on the Infotainment’s Wi-Fi hotspot in the
The CarStick USB device can be purchased from the
menu item
Wi-Fi Mobile Hotspot Mobile Hotspot.
ŠKODA original accessories.
› Tap WPS quick connection (WPS button).
› Insert a SIM card with activated data services into
› In the mobile device, switch on the option for con-
the CarStick.
nection via WPS.
The required size of the SIM card and the correct
› Wait for the connection to be established and, if
procedure when inserting can be found in the in-
necessary, oÄfirm the respective messages.
structions enclosed with the CarStick device.
Quick connection of Infotainment to the mobile
› Turn on the ignition and switch on Infotainment.
device hotspot
› Insert the CarStick into the USB input at the front.
› Turn on the ignition.
› Wait approximately one minute until a light other
› On the mobile device, turn on the hotspot, its visi-
than the red indicator light on CarStick is perma-
bility, and the option for WPS connection.
nently lit.
› Turn on the Infotainment’s Wi-Fi unit in the menu
When the red indicator light illuminates, remove
item
Wi-Fi Wi-Fi: Wi-Fi.
the CarStick and insert again.
› Tap WPS quick connection (WPS button).
› If the SIM card is protected by a PIN code, then the
› Wait for the connection to be established and, if
PIN code of the SIM card must be entered.
necessary, oÄfirm the respective messages.
› oÄfirm the entered PIN code by tapping
Manual connection of Infotainment to the mobile
Or:
device hotspot
› Tap to save and oÄfirm the PIN code.
› Set the hotspot backup of the mobile device to
WPA2.
› If necessary, set the required network of the data
service provider.
› Turn on the ignition.
88
Infotainment Amundsen › SmartLink
NOTICE
Android Auto
If a SIM card is incorrectly sized or if a SIM card is in-
serted in the wrong direction, there is a risk of dam-
age to the CarStick USB device.
Set network parameters
›
Tap network .
› Set the desired parameters.
Contact the data service provider for precise pa-
rameters for the network setting.
Overview of running applications, phone calls, in-
SmartLink
coming text messages, and more.
Functionality
Turn on voice control (Google Voice)
SmartLink offers the ability to display and operate
Apple CarPlay
ertified applications from a connected mobile de-
vice in the Infotainment screen.
ertifiatioÄ may be conditional upon the use of the
latest update to the particular SmartLink application.
Applications include, for example, apps for route
guidance, telephoning, listening to music, etc.
Mobile devices can be connected via a USB cable.
Supported connection types
SmartLink supports the following connection types:
A
List of available applications
▶ Android Auto
B
Depending on the duration of operation:
▶ Apple CarPlay
▶
Tap: Return to the menu Apple CarPlay
▶ MirrorLink
▶ Hold: Turn on voice control (Siri)
MirrorLink
Overview of the SmartLink connection
Display menu
› Tap
Or:
› Tap
It is not possible to operate the application while
driving
Return to the menu SmartLink
List of running applications
Display of the last running application in connec-
A
Previously connected device
ted mobile devices
B
Currently connection device
Settings
Display information about SmartLink
Disconnection of the active connection
Disconnection of the active connection
Settings in SmartLink menu
Infotainment Amundsen › SmartLink
89
Connection conditions
Restriction
General connection conditions
Restriction of SmartLink applications while driving
✓ The mobile device supports the type of Smar-
For reasons of safety, the operation of some Smar-
tLink connection Android Auto, Apple CarPlay or
tLink applications while driving is not possible or only
MirrorLink.
limited.
✓ Mobile devices, as well as the type of SmartLink
Functionality restriction of Infotainment with an
connection, are supported in the respective mar-
Android Auto connection
ket.
▶ For the duration of the connection, the external de-
✓ Some connected mobile devices require the mo-
vice cannot be used as an audio source in the Me-
bile device to be “unlocked”.
dia menu.
Conditions for Android Auto
▶ By connecting the device, all currently connected
✓ The device to be connected must have Android
Bluetooth® devices will be disconnected and the
Auto connection.
device will automatically be connected as the main
telephone.
A list of devices, supported regions and applica-
▶ For the duration of the connection, no other Blue-
tions that support the Android Auto connection
tooth® devices can be connected to the Infotain-
can be found on the Google, Inc. website.
ment system.
✓ The Android Auto application needs to be instal-
▶ If route guidance is taking place at this moment in
led on the mobile device.
Infotainment, then there is the option to start the
✓ Some applications require the data connection in
route guidance in the Android Auto application.
the mobile device to be turned on.
And vice versa, if route guidance is currently taking
✓ Connect the mobile device for the first time
place in the Android Auto application, then there is
when the vehicle is stationary.
the possibility that this will be terminated by the
Conditions for Apple CarPlay
start of route guidance by the Infotainment sys-
✓ The device to be connected must have Apple
tem.
CarPlay connection.
Functionality restriction of Infotainment with an
A list of devices, supported regions and applica-
Apple CarPlay connection
tions that support the Apple CarPlay connection
▶ For the duration of the connection, the external de-
can be found on the Apple Inc website.
vice cannot be used as an audio source in the Me-
✓ Siri voice control is on.
dia menu.
✓ The data connection in the mobile device is
▶ Connecting the device disconnects all currently
switched on.
connected Bluetooth® devices.
▶ For the duration of the connection, no Bluetooth®
Conditions for MirrorLink
devices can be connected to the Infotainment sys-
✓ The device to be connected must have MirrorLink
tem.
connection.
▶ If route guidance is taking place at this moment in
A list of devices and applications that support the
Infotainment, then there is the option to start the
MirrorLink connection can be found on the web-
route guidance in the Apple CarPlay application.
sites of Car Connectivity Consorcium®.
And vice versa, if route guidance is currently taking
✓ The MirrorLink application needs to be installed
place in the Apple CarPlay application, then there is
on the mobile device.
the possibility that this will be terminated by the
✓ Some applications require the data connection in
start of route guidance by the Infotainment sys-
the connected mobile device to be turned on.
tem.
Functionality restriction of Infotainment with an
MirrorLink connection
Operation
▶ For the duration of the connection, the external de-
Operation of the running MirrorLink application
vice cannot be used as an audio source in the Me-
› To display the following operation surfaces, press
dia menu.
the right rotary control
▶ If you wish to use the device to be connected in
the Telephone menu, the device must be paired
Display of control surfaces at the bottom
with and connected to the Infotainment system by
Display of control surfaces at the top
Bluetooth® before establishing the MirrorLink con-
Return to the MirrorLink main menu
nection.
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст