Skoda Kodiaq (2021 year). Manual in english — page 6
112 Infotainment Amundsen › Radio
Search for and select web radio stations and pod-
› To display the functional surface for the FM sta-
casts based on the selected country
tion, turn on menu item
Advanced settings Station dis-
play: FM switch on
Search for and select web radio stations and pod-
casts based on the selected language
› In the Radio main menu, tap
Search for and select web radio stations and pod-
› To search in sequence, tap or next to the dis-
casts based on the selected genre
played frequency range scale.
See list of related podcasts based on content lis-
Or:
tened to
› Hold down the scroll mark on the frequency range
See list of related podcasts based on content lis-
scale and move it to the desired value.
tened to
The podcasts are shown in the displayed lists
Limitation
with the icon .
▶ Infotainment supports digital radio reception in
List of favourite stations and podcasts
DAB and DAB+ formats.
› In the menu Radio, tap on
▶ Car parks, tunnels, tall buildings or mountains can
restrict radio reception.
▶ In the rear side windows, there are antennas for re-
ceiving the radio signal.
Covering the panes with foils or metal-coated la-
bels may affet the reception of the radio signal.
▶ The ŠKODA AUTO company assumes no responsi-
bility for the availability, correct functioning and
broadcast information of the RDS service.
A
Select source
Settings
B
Radio text
Save the station currently being listened to as a fa-
C
Station buttons for favourite stations and pod-
vourite from the Radio main menu
casts
› Hold the desired station key for preferred stations
until the station is stored.
Save station to favourites from the list of available
Operation
stations
Applies to AM, FM and DAB frequency ranges.
Select station
› Hold the line with the name of the desired station.
› Tap the desired preset button.
Save channels from the list of web radio stations
and podcasts
Valid for web radio stations and podcasts
› Select a web radio station as the playback source.
› Tap on
› Go to the desired web radio station or podcast and
select it.
› Tap or at the top of the screen.
› Hold the line with the name of the desired station
or podcast.
SCAN function
› Tap the desired preset button.
The function plays receivable stations of the selec-
With podcasts, it is not possible to save the indi-
ted frequency range in succession for a few seconds
vidual episodes.
each.
› To start automatic play
, tap Scan.
Deleting favourites
› To stop automatic play, tap
› In the menu Radio
Delete memory entries .
Find stations manually
Manual search is available for AM and FM stations.
Infotainment Amundsen › Radio 113
› To delete a station button for preferred stations,
about the content broadcast from the station to
tap the desired station button and oÄfirm the de-
which you are listening.
letion.
› In the menu Radio
Radio text .
› To delete all station buttons for preferred stations
Regional FM station logo
Clear all and oÄfirm the deletion.
Applies to the FM frequency range.
Functional surfaces for analogue and digital ra-
Infotainment provides the option of using ouÄtrû-
dios
speifi FM station logos.
Applies to AM, FM and DAB frequency ranges.
› In the menu Radio
Advanced settings Region for station
The variant for changing stations using the function
logo: .
surface in the Radio menu is set as follows:
› Choose country.
› In the menu Radio
Arrow buttons: .
Switching additional announcements of the DAB
› Select the variant for switching between the sta-
transmitter on / off
tions stored on the station buttons or the stations
Applies to the DAB frequency range.
stored in the list of available stations.
When the function is switched on, other announce-
Functional areas for web radio stations and
ments are received as traffi announcements. These
podcasts
include e.g. weather news, sports reports, fiÄaÄial
Applies to web radio stations and podcasts.
news etc.
The variant for changing stations using the function
› In the menu Radio
Advanced settings Tap Additional DAB
surface in the Radio menu is set as follows:
announcements .
› In the menu Radio
Arrow buttons: .
Switch RDS oÄ/off
› Select the variant for switching between the sta-
Applies to the FM frequency range.
tions stored on the station keys or the last web
The menu item is only available for some countries.
stations and podcasts listened to.
› In the menu Radio
Advanced settings Radio Radio Data
Switch traffic reception (TP) for stations oÄ/off
System (RDS) .
Applies to FM and DAB frequency range.
If the RDS function is disabled, the following menu
› In the menu Radio
Traffic program (TP) .
items in FM station settings are not available:
Assign station logo from the Infotainment memory
▶ Traffi program (TP)
Applies to the FM and DAB frequency ranges.
▶ Radio text
Infotainment offers the option of assigning logos,
▶ RDS Regional
which are stored in the Infotainment memory, to the
▶ Automatic frequency change (AF)
stations.
▶ Regional station logo.
› In the menu Radio
Station logos .
Switch automatic switching to a similar DAB trans-
› Select the desired station and logo.
mitter on / off
Switching off the station logo display
Applies to the DAB frequency range.
Applies to the FM and DAB frequency ranges.
When the function is switched on and there is signal
› In the menu Radio
Station logos .
loss from the DAB station being listened to, Infotain-
› To select the desired station. No station logo .
ment automatically sets another DAB station with
similar content.
Activating / deactivating automatic station logo
› In the menu Radio
Advanced settings Tap Switch to a simi-
assignment
lar station if weak reception .
Applies to the FM and DAB frequency ranges.
When the function is switched on, a station logo
Displaying FM / DAB stations or FM stations in the
from the Infotainment memory is assigned when the
list of available stations
station is stored on a preset.
Applies to the FM and DAB frequency ranges.
› In the menu Radio
Advanced settings Tap Automatic selec-
Depending on the following setting, the stations of
tion of station logos .
the selected frequency range are displayed in the list
of available stations.
Turn oÄ/off radio text reception
› In the menu Radio
Advanced settings Station display: .
Applies to the FM and DAB frequency ranges.
› Select one of the following menu items:
When the function is switched on and the station
buttons are displayed, you can see more information
▶ FM/DAB - the list shows available FM and DAB sta-
tions.
114 Infotainment Amundsen › Media
▶ FM
- the list shows available FM stations.
Details about the track being played
Sound quality of web radio stations and podcasts
Settings
Applies to web radio stations and podcasts.
Video player
› To adjust the sound quality, in the Radio menu tap
on
Audio quality: .
› Choose low or high quality.
The quality you set affets the amount of data used
in the data connection.
Quality also depends on the speed and availability of
the data connection.
If playback failure occur, reduce the sound quali-
ty.
A
Select source
Media
Manage files / multimedia database
What you should be mindful of
Show favourites
Show video
▶ Do not save any important data or that which has
not been backed up on the connected audio sour-
Shrink image display
ces. ŠKODA assumes no responsibility for lost or
Enlarge the image display
damaged files or connected audio sources.
Settings
▶ When changing or connecting an audio source, this
may cause sudden changes in volume. Reduce the
volume before changing or connecting an audio
source.
Player controls
▶ When connecting an audio source, the source in-
Operation - Basics
formation messages can be displayed. These mes-
sages must be observed and, if necessary, con-
firmed.
▶ The national copyright laws that apply in your
country must be observed.
Overview
Display menu
› Tap
Or:
A
Album image / symbol of the connected source
› Tap
▶ Tap: list available albums
Music player
Tap: Start playback
Tap: Pause
Within 3 seconds of starting playback, tap: play
the previous song
After 3 seconds from the start of playback, tap:
to play the current title from the beginning
Hold: fast rewind within the track
Tap: play the next track
Hold: fast forward within the track
A
Choose source
Movement within the title is also possible by drag-
ging the fiģer over the timeline.
Manage files / multimedia database
Show favourites
Infotainment Amundsen › Media 115
Advanced operation
› To save, hold the desired functional area for fa-
Turn on / off repeat playback of the current
vourites A .
track
› Choose one of the available list entries B .
Turn on / off repeat playback of the current al-
bum / folder
› To Clear, in the menu media
tap on Manage favour-
Turn on / off random playback of the current al-
ites .
bum / folder
› To delete a favourite, tap on the list entry and con-
Save the played track in the “My playlist” playlist
firm the deletion.
“My playlist” management
Or:
▶ To display the playlist, tap
› To delete all favourites tap on Clear all and oÄfirm
▶ To manage the playlist tap in the displayed play-
the deletion.
list.
Traffic
The following activities can be carried out in playlist
› To turn oÄ/off traffi monitoring during playback
management:
of media files, go to the Media in the main menu
▶ Control playback.
and tap on Traffic program (TP) .
▶ Change the order of a title in the list by holding and
moving to the desired position.
▶ Delete title.
Restriction
The availability of some media operation functions is
dependent on the connected source and the soft-
ware being used, e.g. Bluetooth®.
Settings
Manage favourites
Supported sources and files
116 Infotainment Amundsen › Media
Supported sources
Source
Interface
Type
SpeifiatioÄ
File system
USB stick
HDD
(without special
software)
MSC
USB devices that
use the USB mass
VFAT
storage support
FAT16
protocol
FAT32
USB 1.x; 2.x 3.x
Devices running
exFAT
USB
or higher with USB
the Android or
NTFS
2.x support
Windows Phone
MTP
operating system
that support the
Media Transfer
Protocol
Devices with the
iOS operating sys-
Apple
HFS+
tem and the iAP2
protocol
Bluetooth® proto-
cols
Bluetooth® player
Bluetooth®
-
-
A2DP and AVRCP
(1.0
- 1.6)
Compatibility of mobile devices
It is possible to check the ŠKODAweb pages to see if Infotainment is compatible with the selected mobile
device being tested. This check is carried out by using the following reference or by reading the QR code:
All information given is incidental and serves as information.
The ŠKODA AUTO company cannot guarantee full functionality and compatibility, e.g. due to a software up-
date of the Infotainment and the mobile devices.
Supported audio files
Compression for-
Codec type
File exten-
Max. bit rate
Max. sam-
Multi channels
mat
sion
[kbps]
pling rate
[kHz]
MPEG 1 Layer 2
32 - 384
32, 44, 48
Mono, stereo,
mp2
MPEG 2 Layer 2
8 - 160
16, 22, 24
Joint stereo
MPEG
MPEG 1 Layer 3
32 - 320
32, 44, 48
Mono, dual mono,
MPEG 2 Layer 3
mp3
16, 22, 24
Stereo, Joint
8 - 160
MPEG 2.5 Layer 3
8, 11, 12
Stereo
Infotainment Amundsen › Media 117
Compression for-
Codec type
File exten-
Max. bit rate
Max. sam-
Multi channels
mat
sion
[kbps]
pling rate
[kHz]
Windows Media
8, 16, 22, 32,
6 - 192
Audio 7
44, 48, 96
Windows Media
8 - 384
Audio 8
8, 11, 16, 22,
Windows Media
Mono, stereo,
WMA
wma
8 - 768
32, 44, 48,
Audio 9 and 9.1
Joint stereo
96
Windows Media
8 - 320
Audio 9.2
Windows Media
32, 44, 48,
32 - 768
Audio 10
96
22, 24, 32,
AAC LC
44, 48
ADTS
aac
16 - 2048
Stereo
AAC HE
16, 22, 24,
AAC HEv2
32, 44, 48
22, 24, 32,
M4A LC
16 - 400
44, 48
MP4
m4a
Stereo
M4A HE
16, 22, 24,
M4A HEv2
16 - 64
32, 44, 48
8, 11, 12, 16,
Mono,
OGG
OGG-Vorbis
ogg
8 - 576
22, 24, 32,
Stereo
44, 48, 96
8, 11, 12, 16,
22, 24, 32,
Mono, stereo,
FLAC
FLAC
Ĕa
-
44, 48, 64,
Joint stereo
88, 96, 192
8, 11, 12, 16,
Mono,
RIFF
WAV
wav
64 - 3072
22, 24, 32,
Stereo
44, 48, 96
Monkey's
Monkey's
ape
8 - 192
8, 11, 12, 16,
Mono, stereo,
SBC
Bluetooth A2DP
-
8 - 345
22, 24, 32,
Joint stereo
44, 48
Mono, stereo,
OPUS
OPUS
opus
6 - 2000
8 - 48
Multichannel
Files that are protected by DRM- and iTunes® methods are not supported by Infotainment.
Supported video files
Codec type
File extension
Max. recordings per second bit rate
[Mbit/s]
mpg
mpeg
MPEG 1
1.5
m1v
mPV
mpg
mpeg
MPEG 2
15
ps
m2v
MPEG 4 (H.264)
m4p
MPJEG
mp4
m4v
50
MPEG 4 (ISO)
mp4v
mov
Xvid
Xvid
20
118 Infotainment Amundsen › Images
Codec type
File extension
Max. recordings per second bit rate
[Mbit/s]
wmv
WMV9
50
asf
Supported playlists
Codec type
File extension
M3U
m3u
M3U8
m3u8
PLS
pls
WPL
wpl
ASX
asx
Images
▶ Stop slideshow
B
View image
Overview
▶ Turn left
Display menu
▶ Turn right
› Tap
▶ Show in output size
Image viewer
Gesture control
▶ Display of the next im-
age
▶ Display the previous
image
A
Select source
Manage files
Settings
▶ Increase the image size
Operation
Operation using functional areas
▶ Reduce the image size
A
View images
▶ Show the next image
▶ Show the previous image
▶ Start slideshow
Infotainment Amundsen › Mobile device management 119
▶
Rotate by 90 °
› Use only media carriers, Bluetooth® devices, and
mobile devices that contain no harmful data or
malware.
› Regularly update the software provided by ŠKODA
AUTO.
We recommend having the system software and
components updated by a specialist company.
WARNING
Settings
Risk of an accident!
Malware in the vehicle can iÄĔueÄe and deactivate
The following Infotainment functions are set in the
certain vehicle functions, or take over the controls of
menu:
these where applicable.
▶ Display image size
▶ If the vehicle reacts in an unusual way, immediately
▶ Display image duration during the slideshow
reduce speed or stop the vehicle.
▶ Slideshow repeat
▶ Seek the help of a specialist garage.
WARNING
Malware in the vehicle may gain unauthorised access
Supported sources and files
to the information and data of the vehicle, and on oc-
Supported sources
casion, to connected mobile devices.
Source
Interface
Speifia-
File system
tioÄ
Overview
USB 1.x; 2.x
USB stick
VFAT
3.x
HDD
FAT16
Using mobile device management, devices can be
USB
or higher
(without
FAT32
connected, disconnected, and interchanged.
with USB
special
exFAT
Display mobile device management
2.x support
software)
NTFS
› Tap on
Manage mobile devices.
Supported files
Codec type
File extension
Max. resolution
[Mpx]
BMP
bmp
4
JPG; JPEG
jpg; jpeg
4 (Progressive
Mode)
64
GIF
gif
4
PNG
png
4
The maximum supported image size is 20 MB.
The device enables a connection via the Blue-
tooth®“hands-free profile”
The device is connected via the Blue-
Mobile device management
tooth®“hands-free profile”
Cybernetic security
The device enables a connection via the Blue-
tooth® audio profile
Your vehicle contains components that are used to
The device is connected via the Bluetooth® audio
exchange information and data between the vehicle
profile
and the connected mobile devices or the Internet.
Remove the device from the list previously con-
nected devices
These components have security mechanisms that
The device enables a SmartLinkconnection to be
minimise the risk of unauthorised access to the vehi-
cle systems.
made via Android Auto
The device enables a SmartLinkconnection to be
Regular software updates help reduce the risk of un-
made via Apple CarPlay
authorised access to vehicle systems and vehicle
The device enables a SmartLinkconnection to be
functions. The following guidelines must therefore
made via MirrorLink
be observed:
A
Connected / Previously connected devices
B
Available devices
120 Infotainment Amundsen › Telephone
Limitations of mobile devices and applications
Connection set-up
Availability of features
Connect a mobile device to Infotainment
The availability of certain features depends on the
› Find available Bluetooth® devices in the mobile de-
type of mobile device, as well as that of the applica-
vice.
tions installed.
› Select the Infotainment Bluetooth® unit.
Compatibility of mobile devices
The unit name can be determined by tapping
It is possible to check the ŠKODAweb pages to see if
Manage mobile devices
device name:.
Infotainment is compatible with the selected mobile
› oÄfirm the PIN; enter it if necessary and then
device being tested. This check is carried out by us-
oÄfirm.
ing the following reference or by reading the QR
code:
Connect Infotainment to a non-paired mobile de-
vice
›
Manage mobile devices .
› Select the desired device from the list of available
devices.
› Select the desired Bluetooth® profile.
› oÄfirm the PIN; enter it if necessary and then
All information given is incidental and serves as in-
oÄfirm.
formation.
› If two devices are connected to the Infotainment,
The ŠKODA AUTO company cannot guarantee full
select the device to be replaced.
functionality and compatibility, e.g. due to a software
Connect Infotainment to a previously connected
update of the Infotainment and the mobile devices.
mobile device
Bluetooth® compatibility of mobile devices
›
Manage mobile devices .
Due to the large number of mobile devices, it is not
Or:
possible to guarantee total Bluetooth® compatibility
with Infotainment. Bluetooth® compatibility depends
›
Select mobile phone .
on the Bluetooth® version as well as the implementa-
› Select the desired device from the list of previous-
tion of Bluetooth® protocols by the manufacturer of
ly connected devices.
the mobile device.
› Select the desired Bluetooth® profile.
Applications in mobile devices
› If two devices are connected to the Infotainment,
select the device to be replaced.
Mobile devices can be used to install applications
that allow you to view additional information on the
SmartLink connection
Infotainment screen, or to operate the Infotainment
Infotainment provides the ability to connect Smar-
system.
tLink to compatible mobile devices using the follow-
Due to the variety of applications, as well as their on-
ing connection types:
going development, the available applications may
Android Auto
not function on all mobile devices. ŠKODA AUTO as-
Apple CarPlay
sumes no liability for their proper functioning.
MirrorLink
The scope of available applications and their func-
Mobile devices can be connected to the Infotain-
tionality is dependent on the type of Infotainment, as
ment via USB cable or Wi-Fi, as long as the mobile
well as the vehicle and country.
device supports it.
Information about ŠKODAapplications
› Connect the mobile device to the Infotainment via
Detailed information about ŠKODA applications can
a USB cable or browse and connect to a wireless
be found on the website after reading the following
network.
QR code or link:
› Tap the icon of the supported connection.
Telephone
Overview
Display menu
› Tap
Or:
Infotainment Amundsen › Telephone
121
› Tap
If, for example, the digits 32 are entered, contacts
with the letter sequence DA, FA, EB etc. are dis-
If the menu phone is not displayed, check wheth-
played next to the numeric keypad.
er the mobile device is connected.
List of telephone contacts
The list of telephone contacts is imported from the
connected main telephone.
› To display the contact list in the phone menu, tap
on
› To search within the list, tap on Enter contact .
› Enter the details you wish to fiÄd.
› To establish a connection with a contact, tap the
functional area showing the desired contact.
If a contact has multiple telephone numbers, select
A
Name of the connected telephone
the telephone number from the displayed list.
▶ Tap: Show list of previously connected phones
› To display the details for a contact, tap .
B
Name of telephone service providers
▶ If the symbol is displayed in front of the name,
Establish a connection to the voice mailbox num-
roaming is active.
ber
› In the Phone menu, tap on
C
Preset buttons for preferred contacts
Change the main telephone with the additional
Telephone conversation
telephone
Depending on the context of the telephone conver-
sation, the following functions can be selected:
Enter telephone number
End connection / reject incoming call / end call
Contact list
Answer an incoming call / return to the held call
Text messages / emails
/
Switch the ringer off / on
Hold a call
Call lists
/
Switch the microphone off / on
Settings
Show details of the caller
Reject an incoming call using an SMS message
Answer a call from the second telephone during
Conditions for connecting a telephone with
a call on the first telephone
Infotainment
The ongoing call on the first telephone is termi-
nated by accepting the call.
✓ The Bluetooth® function of the Infotainment and
the telephone needs to be switched on.
› To switch the call tone from the speakers to the
telephone, go to telephone in the menu and tap on
The Bluetooth® function of the Infotainment is
speakerphone .
switched on in the menu item
Manage mo-
bile devices
Bluetooth.
› To switch the call tone from the telephone to the
speakers, tap
✓ Visibility of the Infotainment is switched on.
The visibility of the Infotainment is switched on in
Conference call
the menu item
Manage mobile devices
A conference call is a joint telephone conversation
Visibility.
with a minimum of three and a maximum of six par-
ticipants.
✓ The telephone is within signal range of the Info-
tainment's Bluetooth® unit.
› Make the next call during an ongoing conversation/
✓ The telephone is compatible with Infotainment.
conference.
Or:
Telephone operation
› Accept a new incoming call by tapping
›
To start a conference call, tap
Enter telephone number
During an ongoing conference call, the following
› In the Phone menu, tap on .
functions can be selected depending on the context:
› Enter the telephone number using the numeric
Hold the conference call and leave temporarily
keypad that is displayed.
(the conference will continue in the background)
The displayed numeric keypad can also be used
Return to the held conference call
for searching for contacts.
122 Infotainment Amundsen › Telephone
/
Switch the microphone off / on
› Select the desired e-mail.
End conference call
› To switch graphic ÄotificatioÄs regarding the re-
Show details of the conference call
ceipt of a new email on or off, tap in the Phone
In the details of the conference call, depending on
menu New message notifications .
the connected telephone, the following functions
can be selected:
Show details of the conference call partici-
Settings for Infotainment telephone functions
pants
Telephone-Infotainment-Connection types
End conversation with the conference call par-
The way in which the telephone is connected de-
ticipant
pends on the number of phones currently connected
Conversation with a participant outside of the
to the Infotainment:
conference call
▶ No telephone - The telephone is connected as a
Send a text message
main telephone.
› In the Telephone
menu, tap Messages
New
▶ One telephone - The telephone is connected as an
SMS .
additional telephone.
› Write a text message and oÄfirm; a view of the
▶ Two telephones - Select the telephone to be re-
message is displayed.
placed.
The message can be edited when the text area
› To switch between the main telephone and the
within the view is tapped.
additional telephone, tap on in the Phone menu.
› Search for or select the recipient of the message.
Connect the telephone to Infotainment
› Add more recipients or oÄfirm selected recipi-
› Find available Bluetooth® devices on the phone.
ents.
› Select the Infotainment Bluetooth® unit.
› Tap on Send .
The unit name can be determined by the menu
Display received text messages
item
Manage mobile devices
Device name:.
› In the Telephone
menu, tap Messages
or
› oÄfirm the PIN; enter it if necessary and then
oÄfirm.
› Messages that are received are displayed as indi-
Connect Infotainment to a non-paired telephone -
vidual messages or as messages in a conversation,
no telephone is connected
depending on the following setting.
› Tap on
To switch the display of messages in a conversa-
Or:
tion on or off, tap in the Phone
menuShow messag-
es as conversation .
› Tap on
› Follow the instructions in the Infotainment screen.
› To switch graphic ÄotificatioÄs regarding the re-
ceipt of a new message on or off, tap in the Phone
Connecting Infotainment to a non-paired tele-
menu New message notifications .
phone - another telephone is connected
Infotainment offers the possibility to read the
› Tap on
Manage mobile devices.
text message (context-dependent) by means of the
› Select the desired device from the list of available
generated Infotainment voice if is tapped.
devices.
› Select the desired Bluetooth® profile.
Send e-mails
› oÄfirm the PIN; enter it if necessary and then
› In the Telephone
menu, tap Emails
New
oÄfirm.
emails .
› Write an e-mail and oÄfirm that an e-mail is dis-
The telephone is connected as an additional tele-
played.
phone.
The text can be edited when the text area within
Or:
the view is tapped.
› If two telephones are connected to the Infotain-
› Search for or select the recipient of the email.
ment, select the telephone to be replaced.
› Add more recipients or oÄfirm selected recipi-
Connect Infotainment to a previously paired tele-
ents.
phone
› Enter the subject of the e-mail.
›
Manage mobile devices .
› Tap on Send .
Or:
Show received e-mails
› In the Telephone
menu, tap Emails
Infotainment Amundsen › Wi-Fi 123
Select mobile phone .
› For setting the Infotainment ringtone in the
› Select the desired device from the list of previous-
phone menu select the ringtone .
ly connected devices.
› Select the ringtone.
The telephone is connected as an additional tele-
Number for the voice mailbox
phone.
› For setting the voice mailbox number in the
phone
menu Mailbox number: .
Or:
› Enter the voice mailbox number.
› If two telephones are connected to the Infotain-
ment, select the telephone to be replaced.
Turn the graphic notice regarding receiving a new
message/email on or off
Manage preset buttons for preferred contacts
When the feature is on, the new message icon ap-
pears on the status bar and in the feature area for
the messages when a new message/e-mail is re-
ceived.
› In the Telephone
menu New message notifications .
Simultaneous calls
This applies to some countries.
Depending on the connected telephone, it is possible
to answer the next incoming call and hold the previ-
ous call.
› To save the desired preset button, hold A .
› To switch on simultaneous calls, tap on telephone
› Select a contact from the displayed list.
Parallel talks.
› If the contact contains multiple telephone num-
bers, choose the desired telephone number.
Wi-Fi
› To display the menu for deletion, go to the phone
menu and tap on Manage favourites .
Functionality
› To delete one preset, tap on the list entry and con-
The Wi-Fi can be used for the internet connection or
firm the deletion.
for the SmartLinkConnection.
Or:
The Infotainment hotspot can connect up to 8 mo-
› To delete all station buttons, tap Clear all and oÄfirm
bile devices. At the same time, the Infotainment can
the deletion.
be connected to another hotspot.
Import telephone contacts
› To display the list of connected mobile devices, tap
After first connecting the main telephone with Info-
Wi-Fi Infotainment system as hotspot Connected devi-
tainment, telephone contacts will start to be impor-
ces.
ted into the Infotainment memory.
Infotainment can import up to 5000 telephone con-
Overview of available hotspots
tacts together with contact pictures. Each contact
can include max. 5 telephone numbers.
Display available hotspots
Depending on the type of telephone, import oÄfir-
› Tap
Wi-Fi Wi-Fi:.
matioÄ may be required.
Update telephone contacts
When re-connecting the telephone with Infotain-
ment, an automatic update of the list is carried out.
› For manual update of the list in the phone
menu tap on Import contacts .
Sort contacts in the phone book
› In the Telephone
menu Sort by: Tap and select the
sorting type.
Ringtone
A
Previously connected hotspots
Some phones do not allow the use of the telephone
B
Available hotspots
ringtone; instead, the Infotainment ringtone is used.
C
The hotspot supports the WPS connection
124 Infotainment Amundsen › Wi-Fi
Currently connected hotspot
Activate/deactivate data transfer between the In-
fotainment and the connected device
Delete information about the hotspot connection
› To turn data transmission on or off, tap
Wi-Fi signal strength of the hotspot
Wi-Fi Infotainment system as hotspot Connected devices
The Wi-Fi signal from the hotspot is not available
Change the name of the Infotainment hotspot
▶ Tap
Wi-Fi Infotainment system as hotspot Network
name:.
Function restriction
▶ Enter the name and oÄfirm.
The Infotainment system can only be connected to a
Change password for connection to Infotainment
hotspot with WPA2 access protection.
hotspot
The password must be a minimum of 12 and a maxi-
Restriction of the Wi-Fi connection
mum of 63 characters.
In some countries, the Wi-Fi connection is restric-
ted for legal reasons. When crossing the border of
▶
Wi-Fi Infotainment system as a hotspot Network key .
the country in question, the connection with a mo-
▶ Enter and oÄfirm the password.
bile device connected via Wi-Fi can be ended or
restricted.
Quick connection of Infotainment to the mobile
device hotspot
Find out about ouÄtrû-speifi legal restrictions.
› On the mobile device, turn on the hotspot, its visi-
If necessary, switch off the Wi-Fi manually.
bility, and the option for WPS connection.
›
Wi-Fi Wi-Fi: Tap WPS quick connection (WPS button).
Settings
Automatic WPS connection
› Tap
Wi-Fi Quick connection to Infotainment system.
Connect a mobile device to the Infotainment hot-
spot
› In the mobile device, switch on the option for con-
nection via WPS.
› Turn on the Infotainment’s Wi-Fi hotspot in the
menu item
Wi-Fi Infotainment system as hotspot
› Wait for the connection to be established and, if
Use as hotspot.
necessary, oÄfirm the respective messages.
› Turn on the Wi-Fi on the mobile device.
Manual WPS connection
› In the list of available Wi-Fi devices, look for Info-
› In the mobile device, switch on the option for con-
tainment Wi-Fi.
nection via WPS PIN.
The name of the Infotainment is taken from the
The mobile device display will show the WPS PIN
menu item
Wi-Fi Infotainment system as hotspot
for connecting to the Infotainment.
Network name:.
› Tap
Wi-Fi Quick connection to Infotainment system
› Select the Infotainment hotspot and enter the re-
WPS PIN.
quired password.
› Enter the WPS PIN in the Infotainment and con-
The password for connecting to the Infotainment
firm.
hotspot is taken from the menu item
Wi-
› Wait for the connection to be established and, if
Fi Infotainment system as hotspot Network key.
necessary, oÄfirm the respective messages.
› oÄfirm the connection.
Automatic connection using the QR code
Connect Infotainment to the mobile device hot-
›
Wi-Fi Tap quick connection with infotainment system .
spot
› In the mobile device, switch on the option for con-
› Turn on the Infotainment’s Wi-Fi unit in the menu
nection via QR Code.
item
Wi-Fi WLAN: WiFi active switch on
› With the mobile device, read the QR code dis-
› Select the desired hotspot in the list of available
played on the Infotainment screen.
hotspots.
› Wait for the connection to be established and, if
› Enter the password for connecting to mobile devi-
necessary, oÄfirm the respective messages.
ces.
Tips for a perfect connection
Infotainment stores passwords for previously
connected hotspots.
▶ Keep only the hotspot to be connected switched
on and switch off the other hotspots.
Security level of the Infotainment hotspot
The security level is set at WPA2 and cannot be
▶ Delete unused hotspots. This shortens the time re-
changed.
quired to establish a connection.
▶ For some hotspots, the connection takes longer, so
wait for the connection to fiÄish.
Infotainment Amundsen › SmartLink 125
▶
If the connection is interrupted, recheck the availa-
Android Auto
ble hotspots and repeat the connection.
SmartLink
Functionality
SmartLink offers the ability to display and operate
ertified applications from a connected mobile de-
vice in the Infotainment screen.
ertifiatioÄ may be conditional upon the use of the
Overview of running applications, phone calls, in-
latest update to the particular SmartLink application.
coming text messages, and more.
Applications include, for example, apps for route
Turn on voice control (Google Voice)
guidance, telephoning, listening to music, etc.
Mobile devices can be connected via a USB cable or
Apple CarPlay
WiFi.
Supported connection types
SmartLink supports the following connection types:
▶ Android Auto
▶ Apple CarPlay
▶ MirrorLink
Overview of the SmartLink connection
A
List of available applications
Menu SmartLink
› Tap
B
Depending on the duration of operation:
▶ Tap: Return to the menu Apple CarPlay
▶ Hold: Turn on voice control (Siri)
MirrorLink
A
Previously connected device
B
Currently connection device
Display information about SmartLink
Disconnection of the active connection
It is not possible to operate the application while
driving
Disconnection of the active connection
Return to the menu SmartLink
Settings in SmartLink menu
List of running applications
Display of the last running application in connec-
ted mobile devices
Settings
126 Infotainment Amundsen › SmartLink
Connection conditions
Restriction
General connection conditions
Restriction of the Wi-Fi connection
✓ The mobile device supports the type of Smar-
In some countries, the Wi-Fi connection is restric-
tLink connection Android Auto, Apple CarPlay or
ted for legal reasons. When crossing the border of
MirrorLink.
the country in question, the connection with a mo-
✓ Mobile devices, as well as the type of SmartLink
bile device connected via Wi-Fi can be ended or
connection, are supported in the respective mar-
restricted.
ket.
Find out about ouÄtrû-speifi legal restrictions.
✓ Some connected mobile devices require the mo-
If necessary, switch off the Wi-Fi manually.
bile device to be “unlocked”.
Restriction of SmartLink applications while driving
Conditions for Android Auto
For reasons of safety, the operation of some Smar-
✓ The device to be connected must have Android
tLink applications while driving is not possible or only
Auto connection.
limited.
A list of devices, supported regions and applica-
Restriction of the navigation function
tions that support the Android Auto connection
If route guidance is currently being carried out
can be found on the Google, Inc. website.
through Infotainment, this is ended when you start
✓ The Android Auto application needs to be instal-
route guidance in the Apple CarPlay application.
led on the mobile device.
If there is route guidance in the Apple CarPlay appli-
✓ Some applications require the data connection in
cation, it is ended by starting the destination guid-
the mobile device to be turned on.
ance using Infotainment.
✓ Connect the mobile device for the first time
when the vehicle is stationary.
SmartLink settings
Conditions for Apple CarPlay
✓ The device to be connected must have Apple
Apple CarPlay - Connection via USB
CarPlay connection.
› Turn on the Infotainment.
A list of devices, supported regions and applica-
› Turn on the mobile device.
tions that support the Apple CarPlay connection
› Connect the mobile device to the front USB input
can be found on the Apple Inc website.
using a cable.
✓ Siri voice control is on.
› Choose to connect via Apple CarPlay.
✓ The data connection in the mobile device is
Apple CarPlay - Connection via Wi-Fi from Info-
switched on.
tainment
Conditions for MirrorLink
› Turn on Bluetooth® and Bluetooth® visibility in the
✓ The device to be connected must have MirrorLink
Apple mobile device.
connection.
› Tap on
Manage mobile devices.
A list of devices and applications that support the
› In the displayed list, look for and select the desired
MirrorLink connection can be found on the web-
device with the symbol
sites of Car Connectivity Consorcium®.
› Follow the instructions on the Infotainment screen
✓ The MirrorLink application needs to be installed
and oÄfirm the Bluetooth® pairing.
on the mobile device.
› If another device is connected to the Infotainment,
✓ Some applications require the data connection in
select the device to be replaced.
the connected mobile device to be turned on.
Apple CarPlay - Connect via Wi-Fi from mobile de-
vices
To establish a connection, the following conditions
Operation
must be met:
Operation of the running MirrorLink application
✓ The minimum iOS version is 9.
Display of control surfaces at the bottom
✓ No other mobile device can be connected via
Display of control surfaces at the top
SmartLink.
Return to the menu MirrorLink
✓ Wi-Fi and Bluetooth® functionality is switched on
in the Infotainment system.
› In the mobile device, turn on the CarPlay function.
› Press and hold the
button on the multifunction
steering wheel.
Infotainment Amundsen › Navigation 127
The Infotainment screen displays a connection
› Connect the mobile device to the front USB input
message with the name of the Bluetooth® unit of
using a cable.
the Infotainment.
› Choose to connect through MirrorLink.
› Find available Bluetooth® devices on the phone.
MirrorLink - Disconnect
› Select the Infotainment Bluetooth® unit.
› In the MirrorLink menu, tap on
› If necessary, oÄfirm the PIN.
› Tap on
› In the Infotainment screen, select the connection
type Apple CarPlay.
Change to another device / connection type
Infotainment allows you to switch between currently
Apple CarPlay - Disconnect
connected devices and the connection type.
› In the Apple CarPlay menu, tap on the function
› Tap on
area “ŠKODA”.
› Select the desired device or connection type.
› Tap on
Android Auto - Connection via USB
› Turn on the Infotainment.
Navigation
› Turn on the mobile device.
Navigation announcements
› Connect the mobile device to the front USB input
using a cable.
Infotainment route guidance takes place using
› Choose to connect via Android Auto.
graphic driving recommendations and navigation an-
nouncements.
Android Auto - Connection via Wi-Fi from Info-
tainment
The navigation announcements are generated by the
› Tap on
mobile devices.
Infotainment system. Navigation announcement
clarity (e.g. road or city name) cannot always be
› Select the desired device from the list of available
devices.
guaranteed.
› Select the Bluetooth®hands-free profile.
Repeat the last navigation announcement
› oÄfirm the PIN; enter it if necessary and then
› Tap on
oÄfirm.
Turn off navigation announcements
› If another device is connected to the Infotainment,
› Tap on
select the device to be replaced.
› From the list of known devices, select the desired
device with the symbol.
Navigation overviews
Android Auto - Connect via Wi-Fi from mobile de-
Display menu
vices
› Tap
To establish a connection, the following conditions
must be met:
Map overview
✓ The minimum Android version is 5.
✓ No other mobile device can be connected via
SmartLink.
✓ Wi-Fi and Bluetooth® functionality is switched on
in the Infotainment system.
› Find available Bluetooth® devices on the phone.
› Select the Infotainment Bluetooth® unit.
› If necessary, oÄfirm the PIN.
› In the Infotainment screen, select the connection
type Android Auto.
A
Vehicle position
Android Auto - Disconnect
B
Route
› In the Android Auto
menu, tap “Return to SKO-
C
Route view
DA”.
End route guidance
› Tap on
D
Display the destination input and route view
MirrorLink - Connection via USB
menu
› Turn on the Infotainment.
E
Traffi obstruction
› Turn on the mobile device.
128 Infotainment Amundsen › Navigation
F
Following driving recommendation
› Select the desired destination.
G
POI
Destination details are displayed with the option of
starting route guidance.
H
Change map orientation
▶ North-facing 2D map
Selecting the destination entered via the address
▶ 2D map facing the direction of travel
› Tap on
▶ 3D map facing the direction of travel
A menu for entering the destination via the ad-
dress is displayed.
I
Road signs for the affeted route section
› Enter the required information.
Find destination
Destination details are displayed with the option of
Centre the map on the vehicle position
starting route guidance.
Display the settings menu
List of stored destinations
Turn off navigation announcements
› Tap on
Repeat the last navigation announcement
J
Display map in accordance with the following
setting
▶ Auto - Map in day / night mode depending on the
vehicle lighting currently switched on
▶ Day - Map in day mode
▶ Night - Map in night mode
K
Display navigation in the digital instrument clus-
ter
L
End route guidance
A
List of stored destinations
Show the entire route
B
Select category of stored destinations
Settings
▶
- Favourites
▶
- Last destinations
Map display in the digital instrument cluster
The map can be displayed in the digital instrument
▶
- Telephone contact destinations
cluster or on the Infotainment display.
Selecting the stored destination
› To change the display tap
in the Navigation
› Select the category of stored destinations.
menu.
› Select the desired destination.
Find destination
Destination details are displayed with the option of
› Tap
starting route guidance.
Recommended destinations
›
Tap on
A
Input line
B
List of recently searched destinations
C
POI categories
A
North-facing vehicle position
› Tap: search for the selected category
B
Traffi obstruction
Show destination list
Delete the recommended destination
Enter destination via address / fiÄd destination
The view can display up to 5 recommended destina-
Select the destination you are looking for
tions in the following categories:
› Enter the details for the destination search.
Infotainment Amundsen › Navigation 129
▶
Destination - home address
E
15 s time countdown before automatic start of
▶ Destination - business address
the route guidance
▶ Favourites
› Tap: Interrupt time countdown
▶ Last destinations
F
Start route guidance
Destination alignment depends on the direction in
Show information on the selected route
relation to the current vehicle position. The function-
Set parameters for route calculation
al surface with the destination displays information
about the estimated travel time to the destination.
Route overview
If the vehicle has active online services and there is a
› Tap on
traffi obstruction on the route to the destination,
the traffi obstruction icon will be displayed.
Delete the recommended destination
› Touch the functional surface for the recommended
destination and swipe left.
› Tap on .
Selecting destination by tapping the map point
› Tap the desired item or the POI icon in the map.
A
Information on current vehicle position
B
Final route destination
Tap: the following menu items can be selected:
› Show on map
› Stop route guidance
C
Route stopover
Tap: the following menu items can be selected.
› Show on map
A
Show destination details with the following pos-
› Add stopover destination
sible settings:
D
Destination provided by Infotainment on the
▶
- Save destination as a favourite
route
▶
- Delete favourites
Tap: the following menu items can be selected.
▶
- Set destination as a starting point for
› Show on map
route guidance in demo mode
›
Delete
B
Start direct route guidance
E
Traffi obstruction on the route
C
Route calculation
Tap: the following menu items can be selected.
Route calculation
› Show on map
› Avoid
F
Route view
Changing route destinations
In the route overview, it is possible to exchange the
destination and the intermediate destinations with
each other and thus change their order.
› Hold the line with the desired destination until the
functional surface for the destination becomes
free.
› Move the destination to the desired position and
A
Current vehicle position
release the functional surface.
B
Proposed fastest route
The route is re-calculated.
C
Alternative routes
D
Destination position
130 Infotainment Amundsen › Navigation
Overview of traffic density
Limitation
When ŠKODA online services are activated, traffi
Infotainment may give incorrect driving recommen-
density information can be displayed in the form of
dations if the road conditions or the traffi do not
the following colour scale in the route view F .
match the navigation data. This can lead to the route
Low density
High density
guidance being carried out using a differeÄt route or
Traffi density information is not available
proposing a change of direction in a one-way street.
Information for updating the navigation data must be
requested from a ŠKODA partner.
Touch operation
Gesture control
Settings
▶ Move map
Avoiding traffic obstructions
If the function is switched on and the Infotainment
receives information about a traffi obstruction on
the route from online traffi information, the route is
recalculated.
Infotainment may suggest a detour to avoid traffi
obstructions, depending on the following settings:
▶ Enter destination by
tapping the map item
›
Route guidance Tap on Avoid traffic incidents .
› Select the desired menu item.
Showing information on the destination / waypoint
The status line displays information on the distance
and travel time to the destination, depending on the
following setting.
▶ Switch 2D/3D map dis-
›
Route guidance Show information for: .
play
› Select the desired menu item for the destination
type.
Showing arrival time information in the destina-
tion / driving time
The status line displays information on the travel
time depending on the following setting.
▶ Zoom into the map
›
Route guidance Time display: .
› Select the desired menu item.
Switching display of couÄtrû-specific speed limits
on / off
When the function is switched on, the country-spe-
ifi speed limits are displayed when crossing nation-
▶ Zoom out of the map
al borders.
› Tap
Route guidance Country information at border crossings.
Switching the display of road signs on motorways
and expressways on / off
When the function is switched on, Infotainment dis-
plays traffi and information signs on motorways and
▶ Rotate the map
expressways.
› Tap
Route guidance Information signs on motorways and dual
carriageways.
Switching the fuel warning on / off
When the function is switched on and the fuel sup-
ply reaches the reserve area, a warning message ap-
pears with the option of going to the nearest petrol
station.
Infotainment Amundsen › Navigation 131
› Tap
Route guidance Fuel warning.
Automatic update
Infotainment automatically carries out an update if
Switching the speed limit warning on / off
the following conditions are met:
› Tap
Route guidance Road signs.
✓ The “Infotainment Online” online services are ac-
› Set the note type and the value for exceeding the
tivated.
permissible speed.
✓ An update of the navigation database for the cur-
Settings for trailer operation
rent vehicle position or route destination is availa-
To calculate the correct route for trailer operation,
ble.
switch on trailer inclusion.
Determining the navigation database version
› Tap
Route guidance Trailer Include trailer.
› Tap
System information.
Set the maximum speed for trailer operation to cor-
rectly calculate the route time.
› Tap
Route guidance Trailer Maximum speed for trailers.
› Set the maximum speed for the trailer.
Setting navigation announcements
› Tap
navigation announcements.
› Select and set the desired menu item.
Show preferred POI categories
Favourite POI categories are displayed on the map
and provided in the destination search.
› Tap
Basic functions Define preferred POI categories.
› Set favourite categories.
Setting home address
The defiÄed destination of the home address is dis-
played in the overview of recommended destina-
tions.
› Tap
Basic functions Enter home address.
Setting business address
The defiÄed destination of the business address is
displayed in the overview of recommended destina-
tions.
› Tap
Basic functions Enter business address.
Switching demo mode on / off
In demo mode, the route guidance from the starting
point of the demo mode to the selected destination
is simulated.
When the function is switched on, Infotainment is-
sues a query before the start of route guidance as to
whether the route guidance should be carried out in
the normal way or in demo mode.
›
Tap on Basic functions Demo mode .
DefiÄiÄg the starting point of the demo mode
› Select or locate the desired destination to be the
starting point of demo mode.
› In the displayed destination details, tap More
Updating the navigation database
Information for updating the navigation database
must be requested from a ŠKODA partner.
132 Infotainment Columbus › Infotainment overview
▶ Volume adjustment of individual Infotainment
Infotainment Columbus
functions
Infotainment overview
The volume can be adjusted on e.g. one of the fol-
lowing menu items:
▶ Volume adjustment of voice commands
▶ Setting the maximum volume when Infotainment
is turned on
▶ Speed-dependent volume setting
▶ Setting the Infotainment to mute with the park-
ing aid switched on
Depending on the equipment, the following ad-
vanced sound settings can be set
▶ Setting space optimisation
▶ Setting the audio profiles according to genre
▶ Adjusting the subwoofer volume
A
Touchscreen
CoÄfiguratioÄ wizard
All menus
The oÄfi£uratioÄ wizard helps to set certain Info-
Favourite menus
tainment functions.
Increase volume
The oÄfi£uratioÄ assistant is automatically displayed
if the ignition is switched on and if there are at least
Reduce volume
two menu items that have not been set up after
Depending on the status:
switching on the Infotainment.
▶ Infotainment switched off
› To switch off the automatic display, when the
▶ Tap: Turn on Infotainment
oÄfi£uratioÄ assistant is displayed tap Don't show
▶ Infotainment switched on
again .
▶ Tap: Switch sound off/oÄ
› For manual display tap
Configuration wizard .
▶ Hold: Switch off Infotainment
Set up menu HOME
› To display another page of the HOME menu, press
the screen with two fiģers and drag it to the left
System
or right.
To add the preferred menu, proceed as follows:
Limitation
› Tap on an empty functional surface.
For safety reasons, operation of some Infotainment
Or:
functions while driving is not possible or is restricted.
The Infotainment system indicates this by means of
› Press and hold an occupied functional surface and
then tap on an empty functional area.
a message in the screen.
› Select a menu with the desired dimension of the
functional surface.
Basic settings
› Tap on to exit edit mode.
Setting basic functions
To remove the preferred menu, proceed as follows:
The following Infotainment functions are set in the
› Press an occupied functional surface.
menu:
› Tap on .
▶ Time and date
› Tap on to exit edit mode.
▶ Language
Set up menu MENU
▶ Units
The position of the functional surfaces in the MENU
▶ Restore factory settings
menu can be customized as follows:
Sound settings
› Press and hold the desired functional surface until
The Infotainment sound is set in the menu
it is free.
The following menu items can be set:
› Move the functional surface to a differeÄt position.
▶ Setting the equalizer
▶ Adjusting the volume ratio
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст