Skoda Fabia (2019 year). Manual — part 8
Supported audio sources and file formats - Amundsen
Supported audio sources
Source
Interface
Type
Specification
File sys-
tem
SD card
SD reader
Standard size
SD, SDHC, SDXC
FAT16
FAT32
exFAT
NTFS
USB
devices
USB 1.x; 2.x
and 3.x or
higher with
support of
USB 2.x
MSC
USB stick;
HDD (without
any special soft-
ware);
USB devices that
support MSC op-
eration
MTP
Devices with the
Android operat-
ing system or
Windows mobile
(mobile phone,
tablet)
Apple
Devices with the
iOS operating
system (iPhone,
iPod, iPad)
Blue-
tooth
®
-
Player
-
-
Bluetooth logs
A2DP and AVRCP
(1.0-1.5)
-
Supported audio file formats
Codec type
(File formats)
File suffix
Max. bit rate
Maximum
sampling
rate
Playlists
Windows Media
Audio
9 and 10
wma
384 kbit / s
96 kHz
m3u
pls
wpl
m3u8
asx
WAV
wav
Defined by
the format
(approx. 1.5
Mbit/s)
MPEG-1; 2 and 2,5
layer 3
mp3
320 kbit / s
48 kHz
MPEG-2 and 4
aac; mp4;
m4a
FLAC;
Vorbis
flac; ogg
Defined by
the format
(approx. 5.5
Mbit/s)
Audio sources sub-divided into areas using the GPT standards (GUID partition
table) are not supported by Infotainment.
Files that are protected by Digital Rights Management (DRM) technology can-
not be played back by Infotainment.
124
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Supported audio sources and file formats – Swing
Supported audio sources
Source
Interface
Type
Specification
File system
SD card
SD reader
Standard
size
SD, SDHC, SDXC
FAT16
VFAT
FAT32
exFAT
USB
devices
USB 1.x; 2.x
and 3.x or
higher with
support of
USB 2.x
MSC
USB stick;
HDD (without any spe-
cial software);
USB devices that sup-
port MSC operation
MTP
Devices with the An-
droid operating system
or Windows mobile
(mobile phone, tablet)
Apple
Devices with the iOS
operating system
(iPhone, iPod, iPad)
Blue-
tooth
®
-
Player
-
-
Bluetooth logs A2DP
and AVRCP (1.0-1.5)
-
Supported audio file formats
Codec type
(File formats)
File suffix
Max. bit rate
Maximum
sampling
rate
Playlists
Windows Media
Audio 9 and 10
wma
384 kbit / s
96 kHz
m3u
pls
wpl
asx
MPEG-1; 2 and 2,5
(Layer-3)
mp3
320 kbit / s
48 kHz
Audio sources sub-divided into areas using the GPT standards (GUID partition
table) are not supported by Infotainment.
Files that are protected by Digital Rights Management (DRM) technology can-
not be played back by Infotainment.
Supported audio sources and file formats – Blues
Supported audio sources
Source
Interface
Type
Specification
File system
SD card
SD reader
Standard
size
SD; SDHC
FAT16
VFAT
FAT32
USB
devices
USB 1.x; 2.x
and 3.x or
higher with
support of
USB 2.x
MSC
USB stick;
HDD (without any spe-
cial software);
USB devices that sup-
port MSC operation
MTP
Devices with the An-
droid operating system
or Windows mobile
(mobile phone, tablet)
Apple
Devices with the iOS
operating system
(iPhone, iPod, iPad)
Supported audio file formats
Codec type
(File formats)
File suffix
Max. bit rate
Maximum
sampling
rate
Playlists
Windows Media
Audio 9
wma
384 kbit / s
96 kHz
m3u
pls
wpl
asx
MPEG-1; 2 and 2,5
(Layer-3)
mp3
320 kbit / s
48 kHz
Audio sources sub-divided into areas using the GPT standards (GUID partition
table) are not supported by Infotainment.
Files that are protected by Digital Rights Management (DRM) technology can-
not be played back by Infotainment.
125
Media
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Images
Image viewer
Main menu
Applies to Infotainment Amundsen.
Fig. 149
Images: Main menu
›
To display the main menu, press
, then tap the function surface .
Main menu
Select the image source
Folder/image list
Display the previous image
Switch on the slideshow
Switch off the slideshow
Display the next image
Menu settings for Images
Rotate the image 90° anticlockwise
Rotate the image 90° clockwise
Display the original image size while retaining the aspect ratio
Guidance to GPS coordinates (the display only occurs if the image con-
tains GPS coordinates) (applies to Infotainment Amundsen)
A
Controlling viewed images
Function
Action
Display the next image
Finger movement across the screen to the
left (with initial representation)
Tap
Display the previous image
Finger movement across the screen to the
right (with initial representation)
Tap
Increase the image size
Touch the screen with two fingers and pull
apart
Turn the knob to the right
Reduce the image size
Touch the screen with two fingers and close
together
Turn the knob to the left
Move the image with an en-
larged display
Drag your finger over the screen in the re-
quired direction
Rotate by 90 °
Touch the screen with two fingers and move
clockwise or anti-clockwise (only available
with initial representation)
Tap or
Maximum magnification of dis-
play
Double tap on the screen
Display the original image size
while retaining the aspect ratio
Double tap on the screen again
Press the knob
CAUTION
Viewing images on the Infotainment screen is not supported by connected Ap-
ple devices.
126
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Supported image file formats and sources
Supported image sources
Source
Type
Specification
File system
SD card
Standard size
SD, SDHC, SDXC
FAT16
VFAT
FAT32
exFAT
NTFS
USB devices
USB stick;
HDD (without
special software)
USB 1.x; 2.x and
3.x or higher with
support of USB
2.x
Supported file formats
Codec type
(File formats)
File suffix
Max. resolution
(Megapixels)
BMP
bmp
4
JP(E)G
jpg; jpeg
4; 64
GIF
gif
4
PNG
png
4
Note
■
The max. supported image size is 20 MB.
■
The images sources structured into areas in accordance with the GPT stand-
ards (GUID partition table) are not supported by Infotainment.
Media Command
Using the system
Introduction to the subject
Applies to Infotainment Amundsen.
Fig. 150
ŠKODA Media Command appli-
cation
The Media Command function allows you to control the playback of audio files
or videos in up to two tablets that are connected to the Infotainment system
via WLAN in the Infotainment system.
The Media Command function enables operation of tablets with the Android
or iOS operating system.
The prerequisitefor the Media Command function is enabled data transfer, the
application installed in the tablet “ŠKODA Media Command” as well as Info-
tainment control approved using the application
“ŠKODA Media Command” application
The ŠKODA app is available in the App Store and Google Play online shops.
After entering the following address into the web browser, the website is
opened with information on the ŠKODA mobile applications.
http://go.skoda.eu/service-app
“ŠKODA Media Command” application
›
Scan the QR code
.
Connecting a tablet to the Infotainment system
›
Switch on the Infotainment hotspot (press button
and then tap function
surface → WLAN → Mobile hotspot → Mobile hotspot).
›
Turn on WLAN in the tablet.
127
Media Command
-------------------------------------------------------------------------------------------------------------------------------------------------------------
›
Establish a WLAN connection in the tablet
›
In the tablet, start the “ŠKODA Media Command” application.
CAUTION
■
If several devices are connected to the Infotainment system by means of
WLAN, there is the danger of WLAN overloading and thus also the inability of
Media Command to function properly.
■
High-definition video playback (e.g. HD) may cause playback problems or
problems connecting the tablets to the Infotainment system.
Main menu
Fig. 151 One tablet / two tablets
›
To display the main Media Command menu, press the
button, then tap
the function surface .
Main menu
Information on the track being played
Playback timeline with a slider
Playback control
Image from the video being played back
Name of the tablet used/Switch to main menu of two tablets (when icon
displayed )
Increase/decrease the tablet volume
Display of main menu and operation of first tablet (symbol )
Display of main menu and operation of second tablet (symbol )
Playback source selection
Wi-fi settings
A
B
C
D
E
F
G
Selecting the source and controlling playback
›
To select the playback source, go to the main menu and tap the function
surface and select the source tablet.
›
To playback, select the category and then the track.
If two tablets are connected, track playback starts in the two tablets at the
same time.
Playback can be controlled via the Infotainment system or on each tablet, in-
dependently of each other. This means there is an option to play back different
tracks on the tablets at the same time.
Playback control
Function
Action
Play/Pause
Tap
Plays the current track from the start
Tap
after 3 s from the start of the track
playback
Play the previous track
Tap
within 3 seconds from the start of the
track playback
Play the next track
Tap
Movement within the track is possible by touching your finger on the timeline
B
Note
Some tablet types allow playback of audio files or videos from an SD card in-
serted in the tablet. Playback of these tracks may be limited.
Supported file formats
Type
Format
Operating system
Android
Operating system
iOS
Video
MPEG-4 Part 2
MPEG-4 Part 10
(H264)
XVID
128
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Type
Format
Operating system
Android
Operating system
iOS
Audio
MPEG-1;2 and
2.5
Layer 3 (mp3)
AAC
(4.1)
M4A
(4.1)
OGG
FLAC
WAV
(4.1)
Telephone
Introductory information
Introduction to the subject
WARNING
The general binding country-specific regulations for operating mobile tele-
phones in the vehicle must be observed.
Telephone
Applies to Infotainment Amundsen.
Fig. 152
Telephone: Main menu
The Telephone main menu appears when a telephone is connected to the Info-
tainment system.
›
To display, press the
button.
›
or: Press the
button, then tap on function surface .
Main menu
Name of the main telephone
Preset station buttons for favourite contacts
Choice of storage group for the preferred contacts
Name of the telephone service provider (with active roaming, the symbol
appears before the name )
Symbol of the main telephone
(tap to display the list of paired tele-
phones)
Swap the main telephone and the additional telephone
Enter the telephone number
A
B
C
D
E
129
Telephone
-------------------------------------------------------------------------------------------------------------------------------------------------------------
List of contacts
Menu with text messages (SMS)
Call list
Menu settings for Telephone
Symbols in the status bar
Signal strength of the telephone service network
Charge status of the telephone battery
Missed call
Current call
Incoming SMS
PIN code of the SIM card was not entered
Telephone
Applies to Infotainment Swing.
Fig. 153
Telephone: Main menu
The Telephone main menu appears when a telephone is connected to the Info-
tainment system.
›
To display, press the
button.
To display the Telephone main menu if a different menu is displayed, which was
open last, press the
button again.
Main menu
Name of the main telephone (tap to display the list of paired telephones)
Preset station buttons for favourite contacts
Choice of storage group for the preferred contacts
Name of the telephone service provider (with active roaming, the sym-
bol appears before the name )
F
A
B
C
D
Enter the telephone number
List of contacts
Call list (missed calls, in addition to the function surface, the number of
calls when missed is displayed)
Starting voice control of the connected phone (e.g. Apple Siri, Google
Voice)
Menu settings for Telephone
Symbols in the status bar
Signal strength of the telephone service network
Charge status of the telephone battery
Missed call
Current call
Pairing and connecting
Introduction to the subject
To connect a telephone to the Infotainment system, the two devices must be
paired via Bluetooth
®
.
Depending on the Infotainment model, up to 20 external devices can be paired
with the device. After the maximum number is reached, the pairing of the next
external device will replace that of the device that has not been used for the
longest period of time.
Connection to an already paired telephone is established automatically after
the ignition is switched on. Or, it is sufficient to search for the phone in the list
of paired devices.
The range of the telephone connection to the Infotainment system is limited
to the passenger compartment.
Compatibility and update
By reading the QR code
on page 95 or after typing the following ad-
dress into the web browser, information about the compatibility of phones and
updates are available for Infotainment Bluetooth
®
can be displayed.
http://go.skoda.eu/compatibility
130
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Conditions for pairing
The ignition is switched on.
The Bluetooth
®
function of the Infotainment system and the telephone is
switched on.
The visibility of the Infotainment system and the telephone is switched on.
The telephone is within range of the Infotainment system's Bluetooth
®
sig-
nal.
The telephone is compatible with the Infotainment system.
No external device is connected to the Infotainment system using Apple
CarPlay.
Pairing and connection process
Pairing the telephone with the Infotainment system
›
Find available external Bluetooth
®
devices in your telephone.
›
Select the name of the Infotainment system.
The name of the Infotainment system can be checked in the Telephone main
menu if you tap on the function surface → Bluetooth in the Name: menu item.
›
Confirm the PIN code (enter and confirm if necessary).
The telephone is connected to the Infotainment or just paired, depending on
the number of external devices that are already connected
Pairing the Infotainment system with the telephone
›
If no telephone is connected to the Infotainment system, press the
but-
ton, then tap the Find telephone function surface or press the
button, then
tap function surface → Find mobile phone.
›
If one telephone is connected to the infotainment system, then, in the Tele-
phone main menu, tap on the
→ Find telephone function surface.
›
Select the desired telephone from the list of retrieved external Bluetooth
®
devices.
›
Confirm the PIN code (enter and confirm if necessary).
WARNING
Do not pair and connect a telephone to the Infotainment system while driv-
ing the vehicle - there is risk of an accident!
Possible connection types
Depending on the number of connected Bluetooth
®
devices and the connec-
tion type, the following functions are available.
Applies to Infotainment Amundsen
First device (main telephone)
Second device (additional tele-
phone)
HFP (incoming/outgoing calls), SMS,
telephone contacts,
Bluetooth
®
player
HFP (incoming calls),
Bluetooth
®
player
a)
Only one external device can be connected to the Infotainment system as a Bluetooth
®
player.
Applies to Infotainment Swing
First device (main telephone)
Second device (additional tele-
phone)
HFP (incoming/outgoing calls),
telephone contacts,
Bluetooth
®
player
Bluetooth
®
player
a)
Only one external device can be connected to the Infotainment system as a Bluetooth
®
player.
Managing paired external devices
›
In the main Telephone menu, tap the function surface → Bluetooth → Paired
devices.
In the list of paired external devices, the following symbols may appear for the
individual external devices.
Applies to Infotainment Amundsen
Symbol
Symbol
colour
Function
Grey
External device can be connected as a telephone
Green
External device is connected as a telephone
Grey
External device can be connected as a Bluetooth
®
player
White
External device is connected as a Bluetooth
®
player
131
Telephone
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Applies to Infotainment Swing
Symbol
Symbol
colour
Function
White
External device can be connected as a telephone
Green
External device is connected as a telephone
White
External device can be connected as a Bluetooth
®
player
Green
External device is connected as a Bluetooth
®
player
Connection set-up
▶
Select the desired external device from the list of paired external devices.
▶
Select the desired profile from the list of available Bluetooth
®
profiles.
If external Bluetooth
®
devices are already connected to the Infotainment sys-
tem, then the Infotainment system will display messages and options for the
possible connection type (e.g. replacement of the connected external Blue-
tooth
®
device) during the connection process.
Disconnection
▶
Select the desired external device from the list of paired external devices.
▶
Select the desired profile from the list of available Bluetooth
®
profiles.
Deleting the paired external device
▶
To delete, tap on one of the following function surfaces.
- Delete all external devices
- Delete the desired external device
▶
Confirm the deletion by tapping on the function surface Delete.
Telephone functions
Enter telephone number and select
Entering a telephone number and dialling
›
In the main Telephone menu, tap the function surface .
Function surfaces of the numeric keypad
Enter the last dialled number/dial the telephone number entered
Emergency call (only applies to some countries)
Breakdown call in case of breakdown
Delete all or All areas
Information call (for information regarding the products and services of
the ŠKODA brand)
Choose the mailbox number (the function is not supported for Infotain-
ment Swing)
Delete the last number entered
Display the function surfaces for the movement of the cursor in the
input line
Searching for a contact using the numeric keypad
The numeric keypad can also be used to search for a contact.
For example, if you enter 32, the unit will display contacts with the letter se-
quence DA, FA, EB, etc. next to the numeric keypad.
Voicemail box (does not apply to Infotainment Swing)
▶
To select the voice mailbox number, tap the function surface .
If the voicemail number was not imported or entered, then this can be entered
or changed as follows.
▶
In the main Telephone menu, tap the function surface → User profile → Mail-
box number:.
▶
Enter the number of your voice mailbox.
List of telephone contacts
Fig. 154 List of telephone contacts / contact details
›
In the Telephone main menu, tap on the function surface and a list of tele-
phone contacts will be displayed
.
If the main telephone is connected to the Infotainment system, the telephone
contacts from the telephone are used.
132
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Function surfaces
Contact search
Dial a number in the telephone contact list (if a telephone contact contains
several telephone numbers, a menu containing the telephone numbers as-
signed to this contact is displayed after the contact is selected)
Display the contact details
Select the telephone number in the contact details
Edit the telephone number of the contact before dialling
Infotainment Amundsen:
The contact name can be read out by the Infotainment system’s generated
voice
Open the menu for sending a text message (SMS)
Infotainment Amundsen:
Start the route guidance to the contact address
Import list
After the main telephone is connected to the Infotainment system for the first
time, the process for importing the telephone contacts into the device memo-
ry starts. The import can take several minutes.
The Infotainment system's telephone book contains 2000 free memory loca-
tions for imported telephone contacts. Each contact can contain up to 5 tele-
phone numbers.
The number of imported contacts can be determined in the menu item →
User profile → Import contacts: or Import contacts.
If an error occurs during the import, a corresponding message appears on the
screen.
Refresh list
When the telephone reconnects with the Infotainment system, the list is auto-
matically updated.
The list can be refreshed manually as follows.
▶
In the main Telephone menu, tap the function surface → User profile → Import
contacts: or Import contacts.
A
B
C
Management of preferred contacts (favourites)
Fig. 155
Favourite contacts
Assigning favourites
›
In the main menu Telephone, tap on the desired function surface
A
.
›
Select the desired contact (if required, one of the contact numbers).
Connecting to a favourite
The function surfaces for preferred contacts allow you to dial the contact tele-
phone numbers immediately.
The favourites are provided in two storage groups.
›
To the change Storage Group tap on the functional surface
B
.
›
To choose tap on the assigned function area
A
.
Changing allocated favourites
›
In the main Telephone menu, press and hold the desired function surface
A
.
›
Select the desired contact (if required, one of the contact numbers).
Deleting a favourite
›
In the main Telephone menu, tap the function surface → User profile → Man-
age favourites.
›
Tap the desired function surface of the preferred contact and confirm the
deletion.
You can delete all contacts by tapping on the function surface Delete all / All
areas and confirming the delete process.
Function surface for emergency call
If the vehicle is not equipped with the buttons for the Care Connect service
, the position of the last function surface in the first group of favour-
ites will show the function surface for an emergency call is displayed in the
status bar. In some countries, this function may not be available.
133
Telephone
-------------------------------------------------------------------------------------------------------------------------------------------------------------
The function surface can be assigned a different number for the preferred
contact.
To restore the emergency number, it is necessary to remove the telephone
from the list of paired external devices
and then to pair and connect
again.
Call list
Fig. 156 Call history / Contact details
›
In the Telephone main menu, tap on the function surface and a call list will
be displayed
.
The call list can also be displayed during a telephone call.
Function surfaces
Set the display depending on the type of call
▶
All areas - List of all calls
▶
Missed calls/Missed calls - List of missed calls
▶
Dialled numbers - List of dialled numbers
▶
Received calls / Received - List of received calls
Dial the contact number/telephone number
Call type symbols
▶
- Answered call
▶
- Outgoing call
▶
- Missed call
Edit the telephone number before dialling (not applicable to Infotainment
Swing)
Display the contact details
▶
C
- Dial the contact number
A
B
Telephone call
Depending on the conversation context, the following functions can be carried
out.
End dialling/reject incoming call/end call
Accept an incoming call/return to a held call
Switch ring tone on/off
Keep talking
Switch microphone on/off
Infotainment Amundsen:
Set up a conference call
Show caller details (if the contact is stored in the list)
Switch hands-free on/off (call to the telephone/switch to Infotainment)
▶
To deactivate the hands-free system, go to the main Telephone menu and tap
on the function surface Tap on hands-freeduring a call.
▶
To activate the hands-free system, tap on the function surface during a
call.
Conference call
Applies to Infotainment Amundsen.
The conference call is a shared call with between three and six participants.
Start a conference call/invite additional participants
›
Make the next call during a call/conference call.
›
or: Take the new incoming call by tapping the function surface
.
›
To initiate a conference call or return to a conference call, tap on the func-
tion surface .
Ongoing conference call
During an ongoing conference call, the call duration is displayed on the screen.
Depending on the context, the following functions can be selected.
Hold a conference call - Leave the conference call temporarily (the con-
ference call continues in your absence)
Return to the held conference call
Switch microphone on/off
134
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
End conference call
Display conference call details
Conference call details
▶
During the ongoing conference call, tap the function surface .
A list of other conference participants is displayed. The following functions
can be selected depending on the type of telephone.
Display participant details
Talk to a participant separately, outside of the conference call
End the call to a conference call participant
Text messages (SMS)
Main menu
Applies to Infotainment Amundsen.
Fig. 157
Text messages main menu
›
In the main Telephone menu, tap the function surface The main menu for
text messages appears
.
Depending on the type of telephone connected, you can perform the following
functions.
Open a list of templates for quick answers
New text message - Create and send the message
Inbox- Open a list of received messages
Sent - Open a list of sent messages
Outbox - Open a list of messages not sent
Drafts- Open a list of drafts (messages in progress)
Deleted- Open a list of deleted messages
A
New text message
Creating and sending the message
›
In the main menu of the text messages, tap on function surface inter-
face
›
Write a text message and confirm. A view of the text message is displayed.
›
Tap the function surface .
›
Select the recipient of the message from the displayed contact list or tap the
function surface and enter the telephone number.
›
To add additional recipients, tap the function surface .
›
To send the text message, tap the function surface .
Viewing the text message
After opening the view message function, the following functions can be exe-
cuted.
The text can be read out by the device's generated voice
The text can be stored as a draft
Open a list of templates with the option to replace the recorded text with
the selected template
Open the contact list
The message can be edited, provided the text area is within the view.
Contact list
After the list has been opened the following functions can be executed.
Add a contact to the recipient list
Enter the telephone number
Return to message view
Tap on the Find function surface to open a list of available telephone contacts.
After selecting the contact number or entering the telephone number, the re-
cipient list will be displayed in the screen.
Recipient list
The following functions can be executed by tapping on one of the function
surfaces.
Display the contact list with the option of adding/removing additional
recipients (to return to the recipient list, tap the function surface .
Remove a contact from the recipient list
135
Telephone
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Send the message
Return to message view
Received text message
When you receive a new message, the number of new messages received is
displayed within the function surface and at the same time the icon in the
status bar is displayed in the status bar.
›
To open a list of received messages, go to the Telephone main menu and
tap on function surface → .
›
Select a message.
The message content and the following menu is displayed.
The text can be read out by the device's generated voice
Display a menu with additional options
▶
Reply with template - Reply using a template
▶
Display numbers - Recognition of telephone numbers in the message in-
cluding the contact number (recognised numbers can be dialled directly
or edited before dialling, or may be sent to this message)
Forward a message with the option to edit the message before sending
Reply to the sender via a message
Data connection
Internet connection
Connecting Infotainment Amundsen
Fig. 158 WLAN (Wi-Fi) / CarStick
Possible connection types
Using WLAN, by connecting the Infotainment system to the hot spot of
the external device
, Connect Infotainment to the hotspot of
the external device.
Using the CarStick USB device
» page 136
.
Connecting via the CarStick device
Applies to Infotainment Amundsen.
The CarStick USB device can be purchased from the original accessories.
›
Insert a SIM card with activated data services into the CarStick device.
The required dimensions of the SIM card, as well as the correct procedure dur-
ing insertion can be found in the instructions enclosed with the CarStick ŠKO-
DA original accessory.
›
Turn on the ignition and switch on Infotainment.
›
Insert the CarStick into the USB input at the front
›
Wait approximately one minute until the red light on Carstick stays continu-
ously lit (if the red lights up, then disconnect and re-insert the Carstick).
A
B
136
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
›
If the SIM card is protected by a PIN code, then the PIN code of the SIM card
must be entered.
›
Confirm the entered PIN code by tapping confirm.
›
or: Tap the functional surface to save and confirm the PIN code.
›
If necessary, set the required network of the data service provider.
If your data provider is not available in the list, ask your provider whether one
of the displayed providers can be used.
The parameters of the telephone service provider network can be set in the
menu item
→ → Network → Network settings.
CAUTION
If you insert a SIM card of the wrong size or in the wrong direction, there is a
risk of damage to the CarStick device.
Connecting via WLAN
Introduction to the subject
Applies to Infotainment Amundsen.
WLAN can be used to connect to the Internet, to playback audio files in the
menu media or for operating the Infotainment system using an application in
the external device (e.g. “ŠKODA Media Command”).
It is possible to connect up to 8 external devices to the Infotainment hotspot
and at the same time to connect Infotainment to another hotspot.
Switching the Infotainment hotspot on/off
›
Switch on the ignition.
›
Switch the hotspot on/off in menu item
→ → WLAN → Mobile hotspot →
Mobile hotspot.
Setting the Infotainment hotspot
The Infotainment hotspot is factory set.
The setting can be changed in menu item
→ → WLAN → Mobile hotspot →
Hotspot (WLAN) settings.
■
Security level: - Type of access protection (always set to WPA2)
■
Network key - Access password
■
SSID: ... - Hotspot name
■
Do not send network name (SSID) - Switch the visibility of the hotspot on/off
▶
To save the configured parameters, tap the Store function surface.
Connecting an external device to the Infotainment hotspot
›
Switch on the ignition.
›
Switch on WLAN in the external device and search for the infotainment hot-
spot.
›
Select the Infotainment hotspot and enter the required password.
›
Confirm the connection.
Note
The name of the infotainment hotspot (SSID) and the access password can be
found in menu item
→ → WLAN → Mobile hotspot → Hotspot (WLAN) settings.
Connect Infotainment to the hotspot of the external device
Fig. 159
Main menu of the Infotainment
WLAN
The Infotainment system can only be connected to a hotspot with WPA2
access protection.
›
Switch on the ignition.
›
If the Infotainment WLAN is not activated, activate it in the menu item
→
→ WLAN → WLAN → WLAN.
In area
A
, a list of available or previously connected hotspots is dis-
played.
The hotspot list can be updated by tapping the function surface
B
.
›
Select the hotspot and enter the password.
If the hotspot is not visible, you can establish the connection to it manually.
137
Data connection
-------------------------------------------------------------------------------------------------------------------------------------------------------------
›
Tap the function surface Manual settings.
›
Set the required hotspot parameters.
›
Tap on the function surface Connect.
Icons and function surfaces in the list of available hotspots
A
Connected hotspot
Signal strength of the connected hotspot
Delete the hotspot
Hotspot connection recommendations
▶
Only leave the hotspot to be connected switched on, switch off the other
hotspot.
▶
On some hotspots, the connection setup takes longer, wait for the end of
the connection setup.
▶
If the connection is interrupted, search for available hotspots again and re-
peat connection setup.
▶
Delete unused hotspots. This shortens the time required for connection set-
up.
Connect via WPS
It is not necessary to enter the access password when connecting via WPS.
Connecting the Infotainment system to the hotspot of the external device
›
Switch on the ignition.
›
In the external device, switch on the hotspot, its visibility, and the WPS con-
nection option.
›
In the Infotainment system, switch on WLAN in menu item
→ → WLAN
→ WLAN → WLAN.
›
Tap the function surface WPS fast connection (WPS button).
Connecting the external device to the Infotainment hotspot
›
Switch on the ignition.
›
Switch on the Infotainment hotspot in menu item
→ → WLAN → Mobile
hotspot → Mobile hotspot.
›
Tap the function surface WPS fast connection (WPS button).
›
In the external device, switch on the WPS connection option.
SmartLink+
Introductory information
Introduction to the subject
Applies to Infotainment Amundsen, Swing.
Fig. 160
Information on SmartLink on the
ŠKODA websites
SmartLink offers the option of displaying and operating certified applications
on an external device connected via USB on the Infotainment screen.
SmartLink supports the following communication systems.
▶
“Android Auto”
▶
“Apple CarPlay”
▶
“MirrorLink
®
”
Using the applications in the connected external device, you can use naviga-
tion, make a call and listen to music.
For safety reasons, the operation of some applications while driving is not pos-
sible or only limited.
Scan the QR code
or enter the following address in your web brows-
er to open the website with information on the SmartLink system.
http://go.skoda.eu/connectivity-smartlink
Depending on the model of the connected external device, some applications
can be operated via the Infotainment system, using your voice or using the
buttons on the multi-function steering wheel.
To activate voice control for the connected external device, hold down
or
or hold down the button on the multifunction steering wheel.
138
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
CAUTION
To establish the connection, the date and time in the Infotainment system
must be set correctly. If the date and time setting is based on the GPS signal,
then problems may arise with establishing a connection when the GPS signal
reception is poor.
Note
■
We recommend that you use extension cords from ŠKODA Original Acces-
sories.
■
With some connected external devices, it is necessary for the connected ex-
ternal device to be “unlocked” for trouble-free functioning of the SmartLink
function.
Main menu
Fig. 161 Supported communication systems / Example of available com-
munication systems of the connected external device
›
To display the main SmartLink menu, press button
, then tap the function
surface .
›
or: Press the
button (applies to Infotainment Swing).
If no external device is connected, then a menu with supported communica-
tion systems SmartLink is displayed
A
Main menu
Supported communication systems
Available communication systems of the connected external device
Display of information about SmartLink
Disconnection of the active connection
Settings of the SmartLink
menu or
A
B
Android Auto
Connection set-up / disconnection
Prerequisites for establishing a connection
The external device to be connected must support the “Android Auto”
communication system.
In the external device to be connected, the “Android Auto” application
must be installed.
Some applications require the data connection in the connected external
device to be switched on.
A list external of devices, supported regions and applications that the “Android
Auto” connection supports can be found on the websites of Google Inc..
Connection set-up
›
Switch on the ignition.
›
Switch on the Infotainment system.
›
Switch on the external device.
›
Connect the external device to the USB input using a cable
.
›
Select the connection using “Android Auto”
B
Disconnection of the active connection
›
In the “Android Auto” main menu, tap the function surface .
›
Tap the “ŠKODA” function surface to go back to the main menu SmartLink.
›
Tap the function surface .
›
or: Disconnect the cable from the USB input. When reconnected, the exter-
nal device is automatically connected.
Function restriction of Infotainment
For the duration of the connection, the external device cannot be used as an
audio source in the Media menu.
By connecting the external device with “Android Auto”, all currently connected
Bluetooth
®
devices will be disconnected and the external device will automati-
cally be connected as the main telephone.
For the duration of the connection, no Bluetooth devices can be connected to
the infotainment system.
139
SmartLink+
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст