Lifan 620. Manual — part 53
4. Switch of left front glass frame riser (Fig. 4-36 and Table 4-6)
Fig. 4-36
Table 4-6
15—body U/G
Right front glass frame
riser motor up
Ignition ON-position, rise-stop glass
4~5V →Less
than 1V
16—body U/Y
Right front glass frame
riser motor down
Ignition ON-position, descend-stop
glass
4~5V →Less
than 1V
213
5. Power window circuit (Fig. 4-37)
3. Faulty wiring
One power window does not work
1. Faulty glass frame riser switch of corresponding door
2. Faulty glass frame riser motor
3. Faulty wiring
Window locking system does not
work
1. Faulty safety switch of left front door glass frame riser
switches
2. Faulty wiring
214
III. Component check
215
Section III BCM Central Lock, Burglar Alarm System
I. Overview
The central lock system is part of BCM (body control module), jointly used with burglar alarm
system, mainly responsible for the control of four door-lock motors, remote keyless entry and inner
lighting control, inactive car start after entering burglar alarm, car locating and so forth. Refer to
use’s manual to find more, its control principle as shown in Fig. 4-38 and Fig. 4-39.
Fig. 4-38
216
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст