Lifan 620. Manual — part 29
I. Fault Diagnosis of Steering System
1. Note for inspection
(1) Take extra care while replacing the components. Incorrect operation may affect the
performance of the steering system and lead to driving accident.
(2) Notes for SRS system. This vehicle is equipped with SRS, like driver air bag and front
passenger air bag. If failing to repair the air bag in correct order, the unexpected deployment of air
bag during the maintenance may lead to serious accident. Read the notes for supplement restraint
system before maintenance (including removal or installation, and check or replacement of
components).
types.
Over loaded or uneven loaded.
Adjust the load.
Improperly toe adjustment.
Adjust it if necessary.
Broken front suspension components.
Install new front suspension components if
necessary.
The vehicle leans
to one side when
running on
smooth road
surface.
Broken rear suspension components.
Install new rear suspension components if
necessary.
117
Table 2-3 (Continued 1)
Fault Possible
Cause
Actions
In case of a vehicle speed below 50 km/h
(30mph), turn the transmission to
NEUTRAL, and turn the ignition switch to
position I (engine OFF-sliding). In case that
the vehicle does not lean to one side when
stopping, install a new steering gear.
In case that the vehicle does not move
Unaligned steering column or the
protecting hood rubs the steering wheel.
Align the steering column.
Blocked steering column universal joint.
Install a new universal joint.
go back to the central
position without the
assistance of the
driver. Besides, it may
feel obstructed or
unsmooth when the
driver turns the
steering wheel to the
central position.
The sealed pad of the soleplatofsteering
column shaft may be torn
Install a new sealed pad if necessary.
118
Table 2-3 (Continued 2)
Fault Possible
Cause
Actions
Blocked or broken tie-rod.
Install a new steering gear if necessary.
Broken or worn front
suspension components.
Install new front suspension components if
necessary.
Incorrect toe adjustment.
Adjust it if necessary.
Blocked column bearing.
Install a new steering column.
After steering, the steering
wheel will not go back to the
central position without the
assistance of the driver.
Besides, it may feel obstructed
or unsmooth when the driver
turns the steering wheel to the
Contaminated steering oil.
Wash the power steering system.
end and parking the vehicle at
the original position)
or if the belt skids.
Chatter from the steering pump
Loose or broken accessory
drive belt.
Install a new accessory drive belt.
Insufficient oil and possible
leakage.
Refill the oil to the specified height.
Discharge the air in the system.
Noise from power steering
pump
Power steering pump.
Check if there is a leakage. Repair it if
necessary.
Install a new power steering pump if necessary.
119
Table 2-3 (Continued 3)
Fault Possible
Cause
Actions
Swish noise
Oil at a temperature below 54°C
(130°F) flow into the bypass
valve of the housing of pump
valve.
Normal.
With air in the oil and leakage in
the system.
Purify the air in the system.
Sob noise
Tire (improper inflation).
Adjust the tire pressure.
Front wheel alignment
(incorrect).
Align the wheels.
Steering column (bent).
Align it and replace it if necessary.
Insufficient return
Steering gear (malfunction).
Replace it if necessary.
120
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст