Lifan 620. Manual — part 65
Section VIII Reverse Radar System
I. Overview
(warning: time interval of 1s);
c. When detection distance S is greater than 0.5m and equal and less than 1m, light in 2 outer
layers: (warning: time interval of 0.5s);
d. When detection distance S is less than 0.5m, light in all 3 layers: (warning: constant
warning).
3. System components:
(1) Reverse radar (2) Reverse probe (3) Reverse indicator (on automatic panel)
261
II. Reverse radar system terminal:
See Fig. 4-111 and Table 4-22.
1Ω
BCM (2-23) - body
R/W
Ultrasonic probe 2 signal
wire
BCM sends out starting
signal
Pulse signal
generated
BCM (2-24) - body
Y/R
Ultrasonic probe 3 signal
wire
When probe works after
BCM sends out starting
signal
Pulse signal
generated
262
Check circuit
as shown in Fig. 4-112
263
(6) Sensor is hit or knocked heavily
(7) Vehicle is close to stairs too much, system can not correctly detect the distance between
bottom stair and the vehicle rear, causing damage on rear mudguard (Fig. 4-113)
Fig. 4-113
264
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст