Infiniti M35 (2010 year). Manual — part 17
2. A list of commands appears on the
screen, and the system announces,
“Would you like to access Phone, Naviga-
tion, Information or Help?”.
3. After the tone sounds and the icon on the
screen changes from
to
,
speak a command.
4. Continue to follow the voice menu
prompts and speak after the tone sounds
until your desired operation is completed.
Operating tips :
● Say a command after the tone.
● Commands that are available are always
shown on the display and spoken through
voice menu prompts. Commands other than
those that are displayed are not accepted.
Please follow the prompts given by the
system.
● If the command is not recognized, the sys-
tem announces, “Please say again”. Repeat
the command in a clear voice.
● Push the BACK button once to return to the
previous screen.
● If you want to cancel the command, push
and hold the TALK
switch. The mes-
sage, “Voice cancelled” will be announced.
● Push the TALK
switch to pause the
operation. Push the TALK
switch
again to restart the operation.
● If you want to adjust the volume of the
system feedback, push the volume control
buttons [+] or [
2] on the steering switch or
use the audio system volume knob while the
system is making an announcement.
How to speak numbers :
INFINITI Voice Recognition requires a certain
way to speak numbers when giving voice com-
mands. Refer to the following examples.
General rule
Only single digits 0 (zero) to 9 can be used. (For
example, if you would like to say 500, “five zero
zero” can be used, but “five hundred” cannot.)
Examples
● 1-800-662-6200
– “One eight zero zero six six two six two
zero zero”
Improving Recognition of Phone numbers
You can improve the recognition of phone num-
bers by saying the phone number in three
groups of numbers. For example, when you try
to call 800-662-6200, say “eight zero zero”
first, and the system will then ask you for the
next three digits. Then, say “six six two”. After
recognition, the system will then ask for the last
four digits. Say, “six two zero zero”. Using this
method of phone digit entry can improve recog-
nition performance.
When speaking a house number, speak the
number “0” as “zero”. If the letter “o (Oh)” is
included in the house number, it will not be
recognized as the number “0 (zero)” even if you
speak “oh” instead of “zero”.
You can only say
“zero” for “0 (zero)”. You can say either “zero”
or “ oh” for “o (Oh)”.
SAA1908
4-102
Monitor, climate, audio, phone and voice recognition systems
w
—
—
05/14/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Command List
Category Command:
Command
Action
Phone
Operates Phone function
Navigation
Operates Navigation function
Information
Displays vehicle Information function
Help
Displays User Guide
● Phone Command:
Command
Action
Dial Number
Makes a call to a spoken phone number up to 10 digits.
Redial
Makes a call to the latest dialed number.
Phonebook
Makes a call to a contact that is stored in the Phonebook.
International Call
Makes an international call by allowing more than 10 digits to be spoken.
Change Number
Corrects the phone number when it is not recognized. (Available during phone number entry)
● Navigation Command:
See the separate Navigation System Owner’s Manual.
Monitor, climate, audio, phone and voice recognition systems
4-103
w
—
—
05/14/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
● Information Command:
Command
Action
Fuel Economy
Displays fuel economy information.
Trip Computer
Displays trip information.
Maintenance
Displays maintenance information.
Traffic Info.
Turns the traffic information system ON and OFF.
4-104
Monitor, climate, audio, phone and voice recognition systems
w
—
—
05/14/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Voice command examples
To use the INFINITI Voice Recognition function,
speaking one command is sometimes suffi-
cient, but at other times it is necessary to speak
two or more commands. As examples, some
additional basic operations by voice commands
are described here.
For navigation system commands, see the sepa-
rate Navigation System Owner’s Manual.
Example 1 - Placing a call to the phone number
800-662-6200:
1. Push the TALK
switch located on the
steering wheel.
2. The system announces, “Would you like
to access Phone, Navigation, Information
or Help?”
3. Speak “Phone”.
SAA1113
SAA1908
Monitor, climate, audio, phone and voice recognition systems
4-105
w
—
—
05/14/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
4. Speak “Dial Number”.
5. Speak “8 0 0”.
6. The system announces, “Please say the
next three digits or dial, or say change
number.”
7. Speak “6 6 2”.
SAA1909
SAA1910
SAA1911
4-106
Monitor, climate, audio, phone and voice recognition systems
w
—
—
05/14/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
8. The system announces, “Please say the
last four digits” or say change number.
9. Speak “6 2 0 0”.
10. The system announces, “Dial or Change
Number?”
11. Speak “Dial”.
12. The system makes a call to 800-662-
6200.
Note :
● You can also speak “800-662-6200” (10
continuous digits) or “662-6200” (7 continu-
ous digits), if the area code is not necessary.
However, the 3-3-4 digit grouping is recom-
mended for improved recognition. (See
“How to speak numbers” earlier in this
section.)
● You cannot only say a phone number in
using the 3-3-4 grouping, 7 digits, and 10
digits using this command. Please use the
“International Call” command for all other
formats.
● If you say “Change Number” during phone
number entry, the system will automatically
request that you repeat the number using
the 3-3-4 format. In this case please say the
area code first and then follow the prompts.
● Do not add a “1” in front of the area code
when speaking phone numbers.
● If the system does not recognize your com-
mand, please try repeating the command
using a natural voice. Speaking too slow or
too loudly may further decrease recognition
performance.
SAA1912
SAA1913
Monitor, climate, audio, phone and voice recognition systems
4-107
w
—
—
05/19/09—tbrooks
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Example 2 - Placing an international call to the
phone number 011-81-111-222-3333:
1. Push the TALK
switch located on the
steering wheel.
2. The system announces, “Would you like
to access Phone, Navigation, Information
or Help?”
3. Speak “Phone”.
4. Speak “International Call”.
SAA1113
SAA1908
SAA1909
4-108
Monitor, climate, audio, phone and voice recognition systems
w
—
—
05/14/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
5. Speak “011811112223333”.
6. Speak “Dial”.
7. System makes a call to 011-81-111-222-
3333.
Note :
Any digit input format is available in the Inter-
national Number input process.
INFINITI VOICE RECOGNITION
ALTERNATE COMMAND MODE
The following section is applicable when Alter-
nate Command Mode is activated. (This mode is
selected by default for Canadian customers.)
The Alternate Command Mode enables the op-
eration of the display, audio, and climate con-
trol through Voice Recognition. When this mode
is active, an expanded list of commands can be
spoken after pushing the TALK
switch,
and the voice command menu prompts are
turned off.
Please note that in this mode the recognition
success rate may be affected as the number of
available commands and ways of speaking each
command are increased. To improve the recog-
nition success rate, try using the Speaker Ad-
aptation Function available in that mode. (See
“Speaker adaptation function” later in this sec-
tion.)
In the Alternate Command Mode, review the
expanded command list for this mode, as some
commands available in the Standard Mode are
replaced. Please see the examples on the
screen.
SAA1914
SAA1915
Monitor, climate, audio, phone and voice recognition systems
4-109
w
—
—
05/14/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Activating Alternate Command Mode
When the Standard Mode is active, perform the
following steps to switch to the Alternate Com-
mand Mode.
1. Push the
SETTING button on the instru-
ment panel.
2. Highlight the “Others” key on the display
and then push the
ENTER button.
3. Highlight the “Voice Recognition” key and
then push the
ENTER button.
4. Highlight the “Alternate Command Mode”
key and push the
ENTER button.
5. The confirmation message is displayed on
the screen. Push the “OK” key to activate
the Alternate Command Mode.
Displaying command list
If you are controlling the system by voice
commands for the first time or do not know the
appropriate voice command, perform the fol-
lowing procedure for displaying the voice com-
mand list (available only in Alternate Command
Mode).
1. Push the
INFO button on the instrument
panel.
2. Highlight the “Others” key using the
INFINITI controller and push the
ENTER
button.
3. Highlight the “Voice Recognition” key us-
ing the INFINITI controller and push the
ENTER button.
You can skip steps 1 to 3 above if you say
“Help”.
4. Highlight the “Command List” key using
the INFINITI controller and push the
ENTER
button.
SAA1916
SAA2168
SAA1803
4-110
Monitor, climate, audio, phone and voice recognition systems
w
—
—
05/14/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
5. Highlight a category using the INFINITI
controller and push the
ENTER button.
6. Highlight an item using the INFINITI con-
troller and push the
ENTER button.
7. If necessary, scroll the screen using the
INFINITI controller to view the entire list.
8. Press the
BACK button to return to the
previous screen.
SAA1901
SAA2031
Monitor, climate, audio, phone and voice recognition systems
4-111
w
—
—
05/15/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
List of help commands
Navigation Commands :
See the separate Navigation System Owner’s Manual.
Phone Commands:
COMMAND
ACTION
Redial
Redials the phone number last dialed.
Dial Number
Dials the phone number given in the command.
Phonebook
Shows the first page of the “Phonebook” list.
Outgoing Calls
Shows the outgoing call history (1 to 5).
Incoming Calls
Shows the incoming call history (1 to 5).
Audio Commands :
● Music Box
COMMAND
ACTION
Music Box
Turns on the “Music Box” hard-disk drive audio system.
● Radio
COMMAND
ACTION
Radio
Turns the radio on, selecting the station and band last played.
Radio AM
Turns to the AM band, selecting the station last played.
Radio FM
Turns to the FM band, selecting the station last played.
4-112
Monitor, climate, audio, phone and voice recognition systems
w
—
—
05/15/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
● Satellite
COMMAND
ACTION
Satellite Radio
Turns the SAT radio on, selecting the station and band last played.
● CD
COMMAND
ACTION
CD
Starts to play a CD.
● Audio
COMMAND
ACTION
Audio OFF
Turns the audio system off.
● iPodT
COMMAND
ACTION
iPod
T
Turns the iPod
T system on.
Vehicle Information Commands:
COMMAND
ACTION
Traffic Info.
Turns the traffic information system ON and OFF.
Fuel Economy
Displays the Fuel Economy screen.
Trip Computer
Displays the Trip Computer screen.
Maintenance
Displays the Maintenance screen.
Tire Pressure
Displays the Tire Pressure screen.
Monitor, climate, audio, phone and voice recognition systems
4-113
w
—
—
05/15/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Climate Commands:
COMMAND
ACTION
Climate Control
Turns the climate control system on and operates it in the AUTO mode.
Climate Control OFF
Turns the climate control system off.
4-114
Monitor, climate, audio, phone and voice recognition systems
w
—
—
05/15/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Displaying user guide
You can confirm how to use voice commands by
accessing a simplified User Guide, which con-
tains basic instructions and tutorials for several
voice commands.
1. Push the
INFO button on the instrument
panel.
2. Highlight the “Others” key using the
INFINITI controller and push the
ENTER
button.
3. Highlight the “Voice Recognition” key us-
ing the INFINITI controller and push the
ENTER button.
You can skip steps 1 to 3 above if you say
“Help”.
4. Highlight the “User Guide” key using the
INFINITI controller and push the
ENTER
button.
5. Highlight an item using the INFINITI con-
troller and push the
ENTER button.
Available items :
● Getting Started
Describe the basics of how to operate the
INFINITI Voice Recognition system.
● Using the Address Book
Refer to Navigation System Owner’s Manual.
● Finding a Street Address (if so equipped)
Refer to Navigation System Owner’s Manual.
● Placing Calls
Tutorial for making a phone call by voice
command operation.
SAA1783
SAA2170
Monitor, climate, audio, phone and voice recognition systems
4-115
w
—
—
05/15/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
● Help on Speaking
Displays useful tips for how to correctly
speak commands in order for them to be
properly recognized by the system.
● Voice Recognition Settings
Describes the available voice recognition
settings.
● Speaker Adaptation
Tutorial adapting the system to your voice.
USING THE SYSTEM
Initialization
When the ignition switch is pushed to the ON
position, INFINITI Voice Recognition is initial-
ized, which takes a few seconds. When com-
pleted, the system is ready to accept voice
commands. If the TALK
switch is pushed
before the initialization completes the display
will show the message: “Phonetic data down-
loaded. Please wait.” or a beep sounds.
Before starting
To get the best performance from INFINITI Voice
Recognition, observe the following:
● Keep the interior of the vehicle as quiet as
possible. Close the windows to eliminate the
surrounding noises (traffic noises, vibration
sounds, etc.), which may prevent the system
from recognizing the voice commands cor-
rectly.
● When the climate control is in the AUTO
mode, the fan speed decreases automati-
cally for easy recognition.
● Wait until a tone sounds before speaking a
command.
● Speak in a natural voice without pausing
between words.
Giving voice command
1. Push and release the TALK
switch
located on the steering wheel.
SAA1113
4-116
Monitor, climate, audio, phone and voice recognition systems
w
—
—
05/15/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
2. A list of commands appears on the
screen, and the system announces,
“Please say a command”.
3. After the tone sounds and the icon on the
screen changes from
to
,
speak a command.
Operating tips :
● Voice commands cannot be accepted when
the icon is
.
● The list displayed can be scrolled by tilting
the ENTER switch on the steering wheel.
● If the command is not recognized, the sys-
tem announces, “Please say again”. Repeat
the command in a clear voice.
● Push the BACK button once to return to the
previous screen.
● If you want to cancel the command, push
and hold the TALK
switch for 1 sec-
ond. The message “Voice canceled” will be
announced.
● Push the TALK
switch again to pause
the operation. Push the TALK
switch
to restart the operation.
● If you want to adjust the volume of the
system feedback, push the volume control
buttons (+ or
2) on the steering wheel or use
the audio system volume knob while the
system is making an announcement.
How to speak numbers :
INFINITI Voice Recognition requires a certain
way to speak numbers when giving voice com-
mands. Refer to the following examples.
General rule
Only single digits 0 (zero) to 9 can be used. (For
example, if you would like to say 500, “five zero
zero” can be used, but “five hundred” cannot.
Phone numbers
Speak phone numbers according to the follow-
ing examples:
● 1-800-662-6200
– “Dial one eight zero zero six six two six
two zero zero.”
Note 1: For the best voice recognition phone
dialing results, say phone numbers as single
digits.
Note 2: You cannot say 555-6000 as “five five
five six thousands”.
Note 3: When speaking a house number, speak
the number “0” as “zero”. If the letter “o (Oh)”
is included in the house number, it will not be
recognized as the number “0 (zero)” even if you
speak “oh” instead of “zero”. You can only say
“zero” for “0 (Zero)”. You can say either “zero”
or “oh” for “o (Oh)”.
SAA1932
Monitor, climate, audio, phone and voice recognition systems
4-117
w
—
—
05/15/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст