Infiniti M35/M45 Y50. Manual — part 804
WINDSHIELD GLASS
GW-13
C
D
E
F
G
H
J
K
L
M
A
B
GW
Repairing Water Leaks for Windshield
Leaks can be repaired without removing and reinstalling glass.
If water is leaking between the urethane adhesive material and body or glass, determine the extent of leakage.
This can be done by applying water to the windshield area while pushing glass outward.
To stop the leak, apply primer (if necessary) and then urethane adhesive to the leak point.
GW-14
POWER WINDOW SYSTEM
POWER WINDOW SYSTEM
PFP:25401
Component Parts and Harness Connector Location
NIS0021F
System Description
NIS0021G
Power is supplied at all time
●
through 50A fusible link (letter F , located in the fuse and fusible link box)
●
to BCM terminal 55, and
●
through BCM terminal 54
●
to power window main switch terminal 19
●
to power window sub-switch (front passenger side) terminal 10
●
to power window sub-switch (rear LH and RH) terminal 10.
●
through 10A fuse [No. 21, located in the fuse block (J/B)]
PIIB6097E
1.
Fuse block (J/B)
2.
Fusible link
3.
BCM M1, M2, M3
4.
Power window main switch D10,
D11
5.
Power window sub-switch D46
6.
Power window motor (front driver
side) D12
7.
Power window motor (rear LH) D58
8.
Front door switch driver side B11
9.
Front door switch passenger side
B35
POWER WINDOW SYSTEM
GW-15
C
D
E
F
G
H
J
K
L
M
A
B
GW
●
to BCM terminal 42.
With ignition switch in ON or START position,
Power is supplied
●
through 15A fuse [No. 1, located in the fuse block (J/B)]
●
to BCM terminal 38, and
●
through BCM terminal 53
●
to power window main switch terminal 10
Ground supplied
●
to BCM terminal 52
●
through body grounds M16 and M70.
●
to power window main switch terminal 17
●
through body grounds M16 and M70.
●
to power window sub-switch (front passenger side) terminal 11
●
through body grounds M16 and M70.
●
to power window sub-switch (rear LH and RH) terminal 11
●
through body grounds B5, B40 and B131.
MANUAL OPERATION
Front Driver Side Door
WINDOW UP
When the front LH switch in the power window main switch is pressed in the up position,
Power is supplied
●
through power window main switch terminal 8
●
to power window motor (front driver side) terminal 2.
Ground is supplied
●
to power window motor (front driver side) terminal 1
●
through power window main switch terminal 11.
Then, the motor raises the window until the switch is released.
WINDOW DOWN
When the front LH switch in the power window main switch is pressed in the down position
Power is supplied
●
through power window main switch terminal 11
●
to power window motor (front driver side) terminal 1.
Ground is supplied
●
to power window motor (front driver side) terminal 2
●
through power window main switch terminal 8.
Then, the motor lowers the window until the switch is released.
GW-16
POWER WINDOW SYSTEM
Front Passenger Side Door
POWER WINDOW SUB-SWITCH (FRONT PASSENGER SIDE) OPERATION
WINDOW UP
When the power window sub-switch (front passenger side) is pressed in the up position
Power is supplied
●
through power window sub-switch (front passenger side) terminal 8
●
to power window motor (front passenger side) terminal 2.
Ground is supplied
●
to power window motor (front passenger side) terminal 1
●
through power window sub-switch (front passenger side) terminal 9.
Then, the motor raises the window until the switch is released.
WINDOW DOWN
When the power window sub-switch (front passenger side) is pressed in the down position
Power is supplied
●
through power window sub-switch (front passenger side) terminal 9
●
to power window motor (front passenger side) terminal 1.
Ground is supplied
●
to power window motor (front passenger side) terminal 2
●
through power window sub-switch (front passenger side) terminal 8.
Then, the motor lowers the window until the switch is released.
POWER WINDOW MAIN SWITCH OPERATION
Signal is sent
●
though power window main switch terminal 14.
●
to power window sub-switch (front passenger side) terminal 16
The operation of power window after receive the signal is as same as operate the power window with power
window sub-switch (front passenger side).
Rear Door (LH or RH)
POWER WINDOW SUB-SWITCH (REAR LH OR RH) OPERATION
WINDOW UP
When the power window sub-switch (rear LH or RH) is pressed in the up position
Power is supplied
●
through power window sub-switch (rear LH or RH) terminal 8
●
to power window motor (rear LH or RH) terminal 1.
Ground is supplied
●
to power window motor (rear LH or RH) terminal 2
●
through power window sub-switch (rear LH or RH) terminal 9.
Then, the motor raises the window until the switch is released.
WINDOW DOWN
When the power window sub-switch (rear LH or RH) is pressed in the down position
Power is supplied
●
through power window sub-switch (rear LH or RH) terminal 9
●
to power window motor (rear LH or RH) terminal 2.
Ground is supplied
●
to power window motor (rear LH or RH) terminal 1
●
through power window sub-switch (rear LH or RH) terminal 8.
Then, the motor lowers the window until the switch is released.
POWER WINDOW MAIN SWITCH OPERATION
Signal is sent
●
though power window main switch terminal 14.
●
to power window sub-switch (rear LH or RH) terminal 16
The operation of power window after receive the signal is as same as operate the power window sub-switch
(rear LH or RH).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст