Infiniti M35/M45 Y50. Manual — part 1045
STARTING SYSTEM
SC-15
C
D
E
F
G
H
I
J
L
M
A
B
SC
VQ35DE ENGINE MODELS (AWD)
Removal
1.
Disconnect the battery cable from the negative terminal.
2.
Remove engine rear undercover, using power tools.
3.
Remove exhaust mounting bracket. Refer to
EM-28, "Removal and Installation"
4.
Remove “B” terminal nut (1).
5.
Disconnect “S” connector (1).
6.
Remove starter motor mounting bolts (A) and harness bracket
(2), using power tools.
7.
Remove starter motor downward from the vehicle.
Installation
Installation is the reverse order of removal.
CAUTION:
Be sure to tighten “B” terminal nut carefully.
1.
Starter motor mounting bolt
2.
Oil pan
3.
Starter motor
4.
“B” terminal harness
5.
“B” terminal nut
6.
“S” connector
: N·m (kg-m, ft-lb)
: Engine front
PKIB8801E
PKIB8802E
PKIB8803E
SC-16
STARTING SYSTEM
VK45DE ENGINE MODELS
Removal
1.
Disconnect the battery cable from the negative terminal.
2.
Remove engine front and rear undercover, using power tools.
3.
Remove left engine mounting insulator and left engine mounting
bracket. Refer to
.
4.
Remove “B” terminal nut (1).
5.
Disconnect “S” connector (2).
6.
Remove the bolt (A) and the harness bracket (3).
7.
Remove starter motor mounting bolts (B), using power tools.
8.
Remove starter motor forward from the vehicle.
Installation
Installation is the reverse order of removal.
CAUTION:
Be sure to tighten “B” terminal nut carefully.
1.
Starter motor
2.
Starter motor mounting bolt
3.
“S” connector
4.
“B” terminal harness
5.
“B” terminal nut
6.
Cylinder block
: N·m (kg-m, ft-lb)
: Engine front
PKIB8797E
PKIB8798E
STARTING SYSTEM
SC-17
C
D
E
F
G
H
I
J
L
M
A
B
SC
Disassembly and Assembly
NKS005BV
VQ35DE ENGINE MODELS (2WD)
1.
Magnetic switch assembly
2.
Dust cover kit
3.
Shift lever set
4.
Center bracket (A)
5.
Yoke assembly
6.
Armature assembly
7.
Brush holder assembly
8.
Thrust washer
9.
Rear cover assembly
10. Shaft gear assembly
11.
Packing
12. Thrust washer
13. Center bracket (P)
14.
E-ring
15. Pinion assembly
16. Ball bearing
17.
Caul
18. Gear case assembly
: N·m (kg-m, in-lb)
(H): High-temperature grease point
PKIB8804E
SC-18
STARTING SYSTEM
VQ35DE ENGINE MODELS (AWD)
1.
Magnetic switch assembly
2.
Dust cover kit
3.
Shift lever set
4.
Center bracket (A)
5.
Yoke assembly
6.
Armature assembly
7.
Brush holder assembly
8.
Thrust washer
9.
Rear cover assembly
10. Shaft gear assembly
11.
Packing
12. Thrust washer
13. Center bracket (P)
14.
E-ring
15. Pinion assembly
16. Ball bearing
17.
Caul
18. Gear case assembly
: N·m (kg-m, in-lb)
(H): High-temperature grease point
PKIB8805E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст