Infiniti M35/M45 Y50. Manual — part 212
TERMINALS AND REFERENCE VALUE FOR CONTROL UNIT
AV-225
[WITH MOBILE ENTERTAINMENT SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
AV
26
(V/W)
Ground
Vehicle speed signal
(8-pulse)
Input
ON
When vehicle speed is
approx. 40 km/h (25 MPH).
29
(G/R)
Ground
Ignition signal
Input
ON
–
Battery voltage
30
(BR)
Ground
ACC power supply
Input
ACC
–
Battery voltage
31
(B)
Ground
Ground
–
ON
–
Approx. 0 V
32
(BR/Y)
Ground
Battery power supply
Input
OFF
–
Battery voltage
Terminal
(wire color)
Item
Signal
input/
output
Condition
Reference value
+
–
Ignition
switch
Operation
SKIA6649J
AV-226
[WITH MOBILE ENTERTAINMENT SYSTEM]
DIAGNOSIS SYSTEM
DIAGNOSIS SYSTEM
PFP:00000
Multifunction Switch Self-Diagnosis Function
NKS004AV
It can check each switch ON/OFF (continuity) operation of multifunction switch.
SELF-DIAGNOSIS MODE
●
Turn the ignition switch from OFF position to ACC position.
Within 10 seconds, press and hold BACK switch and
switch
for 3 seconds or more. Then, when these switches are released,
the buzzer sounds, all indicators of multifunction switch turned
on, and self-diagnosis mode is started.
●
When each switch is pressed, the switch continuity can be
checked by sounding the buzzer.
CAUTION:
The hazard switch cannot be checked.
FINISHING SELF-DIAGNOSIS MODE
●
When the ignition switch is turned ON, self-diagnosis mode is canceled.
Multi AV System Diagnosis Functions
NKS004AW
●
There are 2 diagnosis functions (On board diagnosis and Diagnosis using CONSULT-II). It is necessary to
use them properly according to the condition. If the on board diagnosis starts, perform diagnosis with on
board diagnosis. If the on board diagnosis does not start (because the display is not displayed, the multi-
function switch operation is not activated, etc.), perform diagnosis using CONSULT-II.
●
At on board diagnosis, the AV (NAVI) control unit diagnosis function starts when multifunction switch oper-
ation and the AV (NAVI) control unit performs the diagnosis for each unit of system. Then, it displays the
results on the display.
●
At diagnosis using CONSULT-II, the AV (NAVI) control unit diagnosis function starts when the CAN com-
munication and the AV (NAVI) control unit performs the diagnosis for each unit of system.
On Board Diagnosis
NKS004AX
DESCRIPTION
●
It has Self-Diagnosis mode for conducting trouble diagnosis automatically and a Confirmation/Adjustment
mode for operating manually.
●
Self-diagnosis mode diagnoses AV (NAVI) control unit and communication of each unit composing sys-
tem, and displays self-diagnosis results. NAVI control unit diagnoses communication with GPS antenna
simultaneously.
●
Confirmation/Adjustment mode is used to monitor the vehicle signals requiring operation and judgement
by a technician (malfunctions that cannot be automatically judged by the system), the confirmation/
change/adjustment of setting value, the error history of system, and the communication condition of sys-
tem.
SKIB3979E
DIAGNOSIS SYSTEM
AV-227
[WITH MOBILE ENTERTAINMENT SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
AV
On Board Diagnosis Item
*: With navigation system
STARTING PROCEDURE
1.
Start the engine.
2.
Turn the audio system OFF.
3.
While pushing the “SETTING” button, turn the volume control
dial clockwise or counterclockwise for 40 clicks or more. (When
the self-diagnosis mode is started, a short beep will be heard.)
●
Shifting from current screen to previous screen is performed
by pushing “BACK” button.
Mode
Description
Self Diagnosis
●
AV (NAVI) control unit diagnosis and connection diagnosis between
AV (NAVI) control unit and each unit
●
The DVD-ROM drive diagnosis of NAVI control unit and the connec-
tion diagnosis between NAVI control unit and GPS antenna can be
performed
(DVD-ROM drive will not be diagnosed when no map DVD-ROM is in
it.)
Confirmation/
Adjustment
Display Diagnosis
The tint can be confirmed by the color spectrum bar display. The shad-
ing of color can be confirmed by the gradation bar display.
Vehicle Signals
Diagnosis of signals can be performed for vehicle speed, parking brake,
lights, ignition switch, and reverse.
Speaker Test
The connection of a speaker can be confirmed by test tone.
Climate Control
Start auto air conditioner system self-diagnosis.
Navigation
*
Steering Angle
Adjustment
When there is a difference between the actual turning angle and the
vehicle mark turning angle, it can be adjusted.
Speed Calibration
When there is a difference between the current location mark and the
actual location, it can be adjusted.
Error History
The system malfunction and the frequency when occurred in the past
are displayed. When the malfunctioning item is selected, the time and
place that the selected malfunction last occurred are displayed.
Synchronizer FES clock
–
Vehicle CAN Diagnosis
The transmitting/receiving of CAN communication can be monitored.
AV COMM Diagnosis
The communication condition of each unit of Multi AV system can be
monitored.
Handsfree Phone
The received volume adjustment of hands-free phone, microphone
speaker check, and erase memory can be performed.
Rear Display
Tilt angle adjustment range and automatic retraction ON/OFF when
ignition switch is turned OFF can be selected
Camera Cont.
The signal connected to camera control unit can be checked and the
guiding line position that overlaps rear view camera image can be
adjusted.
Bluetooth
The passkey and the name of device can be checked and changed
Delete Unit Connection Log
Erase the connection history of unit and error history
SKIB3655E
AV-228
[WITH MOBILE ENTERTAINMENT SYSTEM]
DIAGNOSIS SYSTEM
4.
The trouble diagnosis initial screen is displayed, and then the
items of “Self Diagnosis” and “Confirmation/Adjustment” can be
selected.
Self Diagnosis
NKS004AY
1.
Start the diagnosis function, and then select “Self Diagnosis”.
–
Self-diagnosis subdivision screen will be shown and the opera-
tion will enter the self-diagnosis mode.
–
The bar graph visible on self-diagnosis screen displays progress
of the diagnosis.
2.
Diagnostic results are displayed when the self-diagnosis is com-
plete. Each unit name and connection lines between each unit
will be colored according to the diagnostic results, as follows.
Note: Only control unit (AV control unit, NAVI control unit) is displayed in red.
–
If multiple errors occur at the same time for a single unit, the screen switch colors are determined accord-
ing to the following order of priority: red > yellow > gray.
–
Select a switch on the “Diagnosis results” screen and comments
for the trouble diagnosis results will be shown.
SKIB3656E
SKIB3657E
Diagnosis results
Unit
Connec-
tion line
Normal
Green
Green
Connection malfunction
Gray
Yellow
DVD-ROM drive undiagnosed
Gray
Green
DVD-ROM, DVD-ROM drive
malfunction
Yellow
Green
Unit returned an error
Note
Red
Green
SKIB3692E
SKIB3659E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст