Infiniti M35/M45 Y50. Manual — part 109
ASSEMBLY
AT-359
D
E
F
G
H
I
J
K
L
M
A
B
AT
40. Install band servo anchor end pin and lock nut in transmission
case.
CAUTION:
Do not reuse band servo anchor end pin.
41. Install brake band in transmission case.
CAUTION:
Assemble it so that identification to avoid incorrect installa-
tion faces servo side.
42. Install front sun gear to front carrier assembly.
CAUTION:
Apply ATF to front sun gear bearing and 3rd one-way clutch
end bearing.
43. Install needle bearing to front sun gear.
CAUTION:
Apply petroleum jelly to needle bearing.
44. Adjust brake band tilting using a clip so that brake band contacts
front sun gear drum evenly.
SCIA6512E
SCIA5498E
SCIA5014E
SCIA2808E
SCIA5033E
AT-360
ASSEMBLY
45. Adjust brake band.
a.
Loosen lock nut.
b.
Tighten band servo anchor end pin to specified torque.
c.
Back of band servo anchor end pin three turns.
d.
Holding band servo anchor end pin, tighten lock nut to the spec-
ified torque. Refer to
Adjustment
NCS001RB
TOTAL END PLAY
●
Measure clearance between front sun gear and bearing race for
oil pump cover.
●
Select proper thickness of bearing race so that end play is within
specifications.
1.
Measure dimensions “K” and “L” and then calculate dimension
“J”.
a.
Measure dimension “K”.
: 5.0 N·m (0.51 kg-m, 44 in-lb)
SCIA5498E
SCIA2810E
SCIA7073E
SCIA7074E
ASSEMBLY
AT-361
D
E
F
G
H
I
J
K
L
M
A
B
AT
b.
Measure dimension “L”.
c.
Calculate dimension “J”.
2.
Measure dimensions “M
1
” and “M
2
” and then calculate dimen-
sion “M”.
a.
Place bearing race and needle bearing on oil pump assembly.
b.
Measure dimension “M
1
”.
c.
Measure dimension “M
2
”.
“J”:
Distance between oil pump fitting surface of
transmission case and needle bearing mating
surface of front sun gear.
J = K – L
SCIA5352E
SCIA3125E
SCIA3124E
SCIA3126E
SCIA3127E
AT-362
ASSEMBLY
d.
Calculate dimension “M”.
3.
Adjust total end play “T
1
”.
●
Select proper thickness of bearing race so that total end play
is within specifications.
Assembly (2)
NCS001RC
1.
Install O-ring to oil pump assembly.
CAUTION:
●
Do not reuse O-ring.
●
Apply ATF to O-ring.
2.
Install bearing race to oil pump assembly.
CAUTION:
Apply petroleum jelly to bearing race.
“M”:
Distance between transmission case fitting
surface of oil pump and needle bearing on oil
pump.
M = M
1
– M
2
SCIA3125E
T
1
= J – M
Total end play “T
1
”:
0.25 - 0.55 mm (0.0098 - 0.0217 in)
Bearing races:
Refer to
SCIA2810E
SCIA5172E
SCIA6529E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст