Infiniti M35/M45 Y50. Manual — part 841
TROUBLE DIAGNOSIS
LAN-13
[CAN FUNDAMENTAL]
C
D
E
F
G
H
I
J
L
M
A
B
LAN
CAN Diagnostic Support Monitor
NKS004HF
CONSULT-II and CAN diagnostic support monitor (on-board diagnosis function) are used for detecting root
cause.
MONITOR ITEM (CONSULT-II)
Example: CAN DIAG SUPPORT MNTR indication
Without PAST
With PAST
SKIB8742E
Item
PRSNT
Description
Initial diagnosis
OK
Normal at present
NG
Control unit error (Except for some control units)
Transmission diagnosis
OK
Normal at present
UNKWN
Unable to transmit signals for 2 seconds or more.
Diagnosis not performed
Control unit name
(Reception diagnosis)
OK
Normal at present
UNKWN
Unable to receive signals for 2 seconds or more.
Diagnosis not performed
No control unit for receiving signals. (No applicable optional parts)
Item
PRSNT
PAST
Description
Transmission diagnosis
OK
OK
Normal at present and in the past
1 – 39
Normal at present, but unable to transmit signals for 2 seconds or more
in the past. (The number indicates the number of ignition switch cycles
from OFF to ON.)
UNKWN
0
Unable to transmit signals for 2 seconds or more at present.
Control unit name
(Reception diagnosis)
OK
OK
Normal at present and in the past
1 – 39
Normal at present, but unable to receive signals for 2 seconds or more
in the past. (The number indicates the number of ignition switch cycles
from OFF to ON.)
UNKWN
0
Unable to receive signals for 2 seconds or more at present.
–
–
Diagnosis not performed.
No control unit for receiving signals. (No applicable optional parts)
LAN-14
[CAN FUNDAMENTAL]
TROUBLE DIAGNOSIS
MONITOR ITEM (ON-BOARD DIAGNOSIS)
NOTE:
For some models, CAN communication diagnosis result is received from the vehicle monitor. (CONSULT-II is
not available.)
Example: Vehicle Display
Item
Result indi-
cated
Error counter
Description
CAN_COMM
(Initial diagnosis)
OK
0
Normal at present
NG
1 – 50
Control unit error
(The number indicates how many times diagnosis has been
run.)
CAN_CIRC_1
(Transmission diagnosis)
OK
0
Normal at present
UNKWN
1 – 50
Unable to transmit for 2 seconds or more at present.
(The number indicates how many times diagnosis has been
run.)
CAN_CIRC_2 – 9
(Reception diagnosis of each unit)
OK
0
Normal at present
UNKWN
1 – 50
Unable to transmit for 2 seconds or more at present.
(The number indicates how many times diagnosis has been
run.)
Diagnosis not performed.
No control unit for receiving signals. (No applicable optional
parts)
TROUBLE DIAGNOSES WORK FLOW
LAN-15
[CAN FUNDAMENTAL]
C
D
E
F
G
H
I
J
L
M
A
B
LAN
TROUBLE DIAGNOSES WORK FLOW
PFP:00004
Information Needed for Trouble Diagnosis
NKS004HG
CAN communication system performs trouble diagnosis with the following tools.
How to Use CAN Communication Signal Chart
NKS004HH
The CAN communication signal chart lists the signals needed for trouble diagnosis. It is useful for detecting
the root cause by finding a signal related to the symptom, and by checking transmission and reception unit.
Tool
Usage
Interview sheet
For filling in vehicle information and interview with customer.
Data sheet
For attaching CONSULT-II data or on-board diagnosis data.
Diagnosis sheet
For detecting the root cause. (Diagnosis sheet includes system diagram for every CAN system
type)
SELECT SYSTEM
(CONSULT-II)
For checking the condition of control units and the status of CAN communication.
SELF-DIAG RESULTS
(CONSULT-II)
CAN DIAG SUPPORT MNTR
(CONSULT-II)
CAN communication signal
chart
For converting information received from a customer into CAN communication signal transmission
and reception. This information can be used to judge whether a circuit between control units is nor-
mal or abnormal.
Abbreviation list
For checking abbreviations in CAN communication signal chart and diagnosis sheet.
SKIB8715E
LAN-16
[CAN FUNDAMENTAL]
TROUBLE DIAGNOSES WORK FLOW
Trouble Diagnosis Flow Chart
NKS004HI
SKIB8716E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст